Analysis of hydraulic fractures performed on the 4100 level at the Sanford Underground Research Facility.
Abstract not provided.
Engineering topics
Publications and source records attributed to Ingraham, Mathew Duffy.
Abstract not provided.
Abstract not provided.
The purpose of this ISRM Suggested Method is to introduce a guideline on determining deformation and failure characteristics of rocks subjected to true triaxial compression on different stress path. Here, the true triaxial testing apparatus was reviewed by means of the function and engineering application. Some key techniques, such as stress and strain measurements, and reduction of end effect between specimen and metal platens, preventing metal platens interference, were stated and suggested in detail. Methodology of specimen processing, specimen shape, and testing procedure are characterized. There is an explanation of the experimental data processing on stress–strain curves, strength, and fracture mode.
Abstract not provided.
Abstract not provided.
Abstract not provided.
The state of stress in the earth is complicated and it is difficult to determine all three components and directions of the stress. However, the state of stress affects all activities which take place in the earth, from causing earthquakes on critically stressed faults, to affecting production from hydraulically fractured shale reservoirs, to determining closure rates around a subterranean nuclear waste repository. Current state of the art methods commonly have errors in magnitude and direction of up to 40%. This is especially true for the intermediate principal stress. This project seeks to better understand the means which are used to determine the state of stress in the earth and improve upon current methods to decrease the uncertainty in the measurement. This is achieved by a multipronged experimental investigation which is closely coupled with advanced constitutive and numeric modeling.
A critical component of the Underground Nuclear Explosion Signatures Experiment (UNESE) program is a realistic understanding of the post-detonation processes and changes in the environment that produce observable physical and radio-chemical signatures. Rock and fracture properties are essential parameters for any UNESE test bed. In response to the need for accurate modeling scenarios of these observations, an experimental program to determine the permeability and direct shear fracture properties of Barnwell core was developed. Room temperature gas permeability measurements of Barnwell core dried at 50degC yield permeability ranging from 6.24E-02 Darcys to 6.98E-08 Darcys. Friction angles from the direct shear tests vary from 28.1deg to 44.4deg for residual shear strength and average 47.9deg for peak shear strength. Cohesion averaged 3.2 psi and 13.3 psi for residual and peak shear strength values respectively. The work presented herein is the initial determination of an ongoing broader material characterization effort.
Abstract not provided.
Abstract not provided.
Hydrogen effects on small-volume plasticity and elastic stiffness constants are investigated with nanoindentation of Ni-201 and sonic velocity measurements of bulk Ni single crystals. Elastic modulus of Ni-201, calculated from indentation data, decreases ~22% after hydrogen charging. This substantial decrease is independently confirmed by sonic velocity measurements of Ni single crystals; c 44 decreases ~20% after hydrogen exposure. Furthermore, clear hydrogen-deformation interactions are observed. The maximum shear stress required to nucleate dislocations in hydrogen-charged Ni-201 is markedly lower than in as-annealed material, driven by hydrogen-reduced shear modulus. Additionally, a larger number of depth excursions are detected prior to general yielding in hydrogen-charged material, suggesting cross-slip restriction. Together, these data reveal direct correlation between hydrogen-affected elastic properties and plastic deformation in Ni alloys.
Abstract not provided.
Abstract not provided.
Abstract not provided.