Search NASA⌕ Search

Engineering topics

Ingram, Conrad W.

Publications and source records attributed to Ingram, Conrad W..

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Engineering Accessible Adsorption Sites in MOFs for CO 2 Capture

The overall goal of this project was to synthesize metal-organic frameworks (MOFs) with improved CO 2 adsorption and selectivity properties for potential application in removing this greenhouse gas from flue gas streams during fossil fuel processing. MOFs are an important class of 2-dimensional (2D) and 3D supramolecular coordination polymer networks that are comprised of organic linkers (ligands) and metal ion-units or clusters. They generally possess very high surface area, porosity, variable thermal stability and tunable chemistry, which make them potential candidates for CO 2 adsorption. The three specific objectives of this project were as follows: 1) To synthesize MOFs with metal ion adsorption sites in more accessible locations within the structures (towards the center of the organic linkers) in order to enhance their CO 2 adsorption characteristics; 2) To investigate the CO 2 adsorption properties of new MOFs containing pyrazine- and other nitrogen containing ligands as possible improved alternatives to known amine-functionalized MOFs; and 3) To investigate the nature of the adsorption sites and mechanism(s) by conducting computational studies on CO 2 adsorption within the MOF structures and compare the results with experimental observations. The main outcomes of this research are as follows: Nitrogen-containing ligands that possess a diaza-12-crown-4-ether moiety at the center of two phenylcarboxylic acid groups were utilized to synthesize 3D MOFs in which the added transition metal ions (i.e. Co 2+ and Mn 2+ ) were coordinated within the crown moieties. Therefore, the structures had the metal ions in more accessible locations. The new 3D structures, being non-porous however, showed negligible adsorption capacity for CO 2 . The ligand 2,3,5,6,-pyrazinetetracarboxylic acid (PZTC) was successfully used to synthesize four new MOFs, each with one of the following metal ions; Ca 2+ (1D), Zn 2+ (2D), Mn 2+ (3D) and Gd 3+ (3D), and with the dimensionality (D) indicated. The Ca-, Zn- and Mn- PZTC-based MOFs had no obvious accessible pores and showed no adsorption capacity for CO 2 . Gd-PZTC structure however, showed promising capacities of 1.0 mmol/g and 0.6 mmol/g at 273K and 298 K respectively. Another nitrogen-containing ligand explored was 2,2’-dinitro- trans-4,4’- stilbenedicarboxylic acid (DNSDC) and in combination with a co-ligand, 2,2’-bipyridine (2,2’-BPY). The combination of DNSDC with Co 2+ and Mn 2+ yielded four new thermally stable MOFs that showed significant CO 2 absorption capacities. The experimental CO 2 adsorption capacities varied among the structures, ranging between 1.8 mmol/g at 256 K and 0.8 mmol/g at 298K. The DNSDC-based structures maintained significant stability and capacities over many adsorption cycles at 298K. With 2,2’-diamino- trans-4,4’-stillbene dicarboxylic acid (DASDC) as ligand instead of DNSDC, new 3D MOF structures were also synthesized. The structures, however, were less stable, and decomposed on activation (exposure to vacuum and or solvents) and therefore showed negligible CO 2 adsorption capacities. The dinitro-stilbene based MOFs showed promising CO 2 adsorption capacities, thermal stabilities and recyclability, and therefore showed potential for application in CO 2 removal from flue gas. The research accomplishments presented herein support the Department of Energy’s (DOE) Office of Fossil Energy and the National Energy Technology Laboratory (NETL) mission in the area of research that advances the science of coal technologies, specifically carbon capture and storage. The research outcomes can guide rational design/synthesis strategies towards producing advanced materials for CO 2 capture. However, further research is needed in order to develop the materials to meet or exceed capacities and stabilities that are reported for their counterparts.

20 FOSSIL-FUELED POWER PLANTS↗
DOE OSTI2017

1-D calcium, 2-D zinc and 3-D manganese coordination polymers derived from pyrazine-2,3,5,6-tetracarboxylic acid

Three coordination polymers were synthesized from pyrazine-2,3,5,6-tetracarboxylic acid (H 4 pztc) in combination with calcium, zinc and manganese ions under hydrothermal conditions and their structures were determined by single crystal X-ray diffraction, powdered X-ray diffraction, Fourier transformed infrared spectroscopy, thermogravimetric and elemental analyses. Structure 1, {(Ca(H 2 pztc)(H 2 O) 3 )n, crystallizes as 1-D chains, with the partially deprotonated ligand in –O,N,O– coordination mode and with the Ca atoms in an uncommon nine coordinate environment. Structure 2, {Zn1(pztc)(H 2 O) 2 Zn2(H 2 O) 4 } n , is an infinite, 2-D coordination network that contains two nonequivalent Zn atoms, each with octahedral geometry, and the fully deprotonated pztc 4- in bis-bridging chelating coordination mode. The stacked 2-D layers are stabilized by extensive inter-layer water-carboxylate hydrogen-bonding with an inter-layer distance of 4.9 Å. Structure 3, {(Mn 2 (pztc)(H 2 O) 2 )} n , is a covalently bonded 3-D network containing two nonequivalent Mn atoms, each with octahedral geometry, and the fully deprotonated pztc 4- units. Structure 3 exhibits paramagnetic behavior at room temperature, and weak antiferromagnetic properties at very low temperature, which is consistent with their nearest Mn…Mn separation distance of 4.9 Å.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2016

A hydrogen bonded Co(II) coordination complex and a triply interpenetrating 3-D manganese(II) coordination polymer from diaza crown ether with dibenzoate sidearms

In this paper, the diaza crown ether dicarboxylate ligand, 4,4'-((1,7-dioxa-4,10-diazacyclododecane-4,10-diyl)bis(methylene)dibenzoate), L, forms a monomeric coordination complex of Co(II) ions, CoL(H 2 O) 2 ·2H 2 O, 1, and a coordination polymer (MnL·H 2 O) n , 2, with Mn(II) ions under hydrothermal conditions. The monomeric coordination complex (structure 1) is polar with mirror symmetry and crystallizes in the non-centrosymmetric space group Cm. The mirror plane bisects the complex at the six-coordinate Co(II) ion, the two oxygen atoms of the crown moiety and the two oxygen atoms from coordinated water molecules. The coordinated water molecules take part in strong, linear hydrogen bonds with carboxylate oxygens provided by neighboring Co(II)–crown complexes resulting in a three-dimensional (1 : 1) n polar network in which the topology of the underlying 8-coordinated net is sqc3. The structure of 2 crystallizes in the orthorhombic Fdd2 space group as an infinite, polar triply interpenetrating three-dimensional network. The eight-coordinate Mn(II) ion coordinates two oxygen and two nitrogen atoms of the crown moiety, as well as single carboxylate O atom from each of two neighboring ligands. In both structures, the ligand assumes a flexed-wing bird shape, with the two benzoate sidearms of the crown moiety locked in a syn orientation. The metal ion elevated above the plane of the diaza-crown oxygen and nitrogen atoms. The diaza-crown moiety with its two benzoate sidearms has the peculiar property of forming an oriented crystal structure where the metal-crown vectors are oriented parallel to each other in the crystal. However, the structures are achiral, but the rigid crystal lattice prevents re-orientation of the structure through inversion. The coordination polymer (MnL·H 2 O) n , 2, is a 3-center uninodal net with ths (ThSi 2 ) topology. Computational results using the density functional theory (DFT) calculations explain why the flexed-wing bird shape is the preferred and most stable ligand conformation for metal ion binding. Finally, both structures demonstrate magnetic properties that are characteristics of the respective non-interacting isolated paramagnetic transition metal ions that are present.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗