Engineering topics

Inoue, Shunsuke

Publications and source records attributed to Inoue, Shunsuke.

6 records

DOE OSTI2019

Rescattering photoelectron spectroscopy of the CO 2 molecule: Progress towards experimental discrimination between theoretical target-structure models

Photoelectron momentum distributions (PEMDs) generated in strong-field ionization of randomly oriented CO 2 molecules by intense infrared laser pulses at 1300-, 1450-, and 1650-nm wavelengths are measured experimentally and analyzed theoretically. Here, the experimental PEMDs extracted along the outermost backward rescattering caustic are well reproduced by theoretical calculations based on the recently derived factorization formula with an analytical returning photoelectron wave packet (RWP). The sensitivity of the theoretical results to the target structure models used in the calculations is investigated. It is shown that RWPs obtained in the single-active-electron (SAE) approximation and by the Hartree-Fock method have only minor differences. On the other hand, differential cross sections (DCSs) for elastic scattering of a photoelectron on the parent molecular ion calculated by ab initio , SAE, and independent-atom model methods are considerably different. This difference almost disappears after averaging over molecular orientations, so the present experiment does not enable us to discriminate between the different target structure models. However, we show that such a discrimination should become possible by measuring PEMD with aligned molecules. This will provide an access to the rich target structure information contained in the DCS.

74 ATOMIC AND MOLECULAR PHYSICS↗

DOE OSTI2016

Demonstration of periodic nanostructure formation with less ablation by double-pulse laser irradiation on titanium

By pairing femtosecond laser pulses (duration ∼40 fs and central wavelength ∼810 nm) at an appropriate time interval, a laser-induced periodic surface structure (LIPSS) is formed with much less ablation than one formed with a single pulse. On a titanium plate, a pair of laser pulses with fluences of 70 and 140 mJ/cm{sup 2} and a rather large time interval (>10 ps) creates a LIPSS with an interspace of 600 nm, the same as that formed by a single pulse of 210 mJ/cm{sup 2}, while the double pulse ablates only 4 nm, a quarter of the ablation depth of a single pulse.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

DOE OSTI2016

RF synchronized short pulse laser ion source

A laser ion source that produces shortly bunched ion beam is proposed. In this ion source, ions are extracted immediately after the generation of laser plasma by an ultra-short pulse laser before its diffusion. The ions can be injected into radio frequency (RF) accelerating bucket of a subsequent accelerator. As a proof-of-principle experiment of the ion source, a RF resonator is prepared and H{sub 2} gas was ionized by a short pulse laser in the RF electric field in the resonator. As a result, bunched ions with 1.2 mA peak current and 5 ns pulse length were observed at the exit of RF resonator by a probe.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

DOE OSTI2015

Derivation of effective penetration depth of femtosecond laser pulses in metal from ablation rate dependence on laser fluence, incidence angle, and polarization

Ablation rate dependence on laser fluence for copper subjected to oblique femtosecond laser irradiation has been determined experimentally in order to investigate processing induced by oblique irradiation. A difference of ablation rate between p-polarized and s-polarized oblique irradiation is clearly observed. Effective penetration depth is defined to explain the ablation rate dependence instead of using optical penetration depth, which is treated as a key value for determining the ablation rate in conventional theory. The effective penetration depth for copper is presented in simple formulas as a function of laser incidence angle for each polarization.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

DOE OSTI2013

Metal-like self-organization of periodic nanostructures on silicon and silicon carbide under femtosecond laser pulses

Periodic structures were generated on Si and SiC surfaces by irradiation with femtosecond laser pulses. Self-organized structures with spatial periodicity of approximately 600 nm appear on silicon and silicon carbide in the laser fluence range just above the ablation threshold and upon irradiation with a large number of pulses. As in the case of metals, the dependence of the spatial periodicity on laser fluence can be explained by the parametric decay of laser light into surface plasma waves. The results show that the proposed model might be universally applicable to any solid state material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

DOE OSTI2011

Efficient laser-proton acceleration from an insulating foil with an attached small metal disk

Efficient proton acceleration by the interaction of an intense femtosecond laser pulse with a solid foil has been demonstrated. An aluminum coating (thickness: 0.2 {mu}m) on a polyethylene (PE) foil was irradiated at 2 x 10{sup 18} W/cm{sup 2} intensity. The protons from the aluminum-disk (diameter: 150 {mu}m to 15 mm) foil were accelerated to much higher energy in comparison with conventional targets such as PE and aluminum-coated PE foils. The fast electron signal along the foil surface was significantly higher from the aluminum-coated PE foil. The laser-proton acceleration appeared to be affected to the size of surrounding conductive material.

43 PARTICLE ACCELERATORS↗