Engineering topics
Publications and source records attributed to Ip, WING-H..
The possibility that the formation of the plasma pile-up region at comet Halley as observed by Giotto could be the combined result of field-aligned transport and recombination process is discussed. Giotto measurements support the hypothesis.
The Giotto high intensity spectrometer identified the contact surface 4800 km from the comet nucleus. This boundary is clearly seen by a drastic drop in the temperatures of different ion species from 2000 K outside to values as low as 300 K inside. Inside the contact surface outflow speed = > 1 km/sec, in contrast to a value around 0 right outside. These numbers might be affected by a potential charge-up of the spacecraft. Outside the contact surface, the ion temperature rises gradually with increasing distance. Between 9000 and 10,000 km distance the ion density increases by a factor of 4. At 27,000 km distance there is again a rather abrupt jump to significantly higher temperatures, higher outflow speeds, and lower densities.
Fluid parameters for He(++) ions obtained from the Giotto ion mass spectrometer are presented. Proton densities and velocities and thermal speeds of protons, alpha particles, and heavy ions in the hour before closest approach are discussed. A region of enhanced He(++) ion densities, and velocity, and decreased temperature is observed from 20:26 to 21:45. Sharp decreases in the proton density are observed at 23:30 and at 23:41. There is a relative flow velocity between alpha particles and oxygen ions of 30 km/sec during a period from 22:55 to 23:30; the difference in flow velocity is less than the experimental uncertainities. The flow properties of protons observed during this period are also discussed.
Data from the Vega 1 permitted the determination of the total neutral gas density profile along the spacecraft trajectory. Discounting small fluctuations, the field ionization source instrument measured a density profile which varied approximately as the inverse radial distance squared. Data from the electron impact ionization instrument yielded a series of calibration points; e.g., the neutral density at 100,000 km is 10,000/cc. The combined data provide a calibrated total density profile, and imply a neutral production rate of 10 to the 30th power molecules/sec.