Search NASA⌕ Search

Engineering topics

Irle, Stephan

Publications and source records attributed to Irle, Stephan.

At least 73 records · Page 4

Structural transformations of graphene exposed to nitrogen plasma: quantum chemical molecular dynamics simulations

Nitrogen-doped graphene (N-graphene) has been intensively studied for tailoring the electronic property of the graphene, because different nitrogen configurations influence the electronic properties of N-graphene in different ways. However, atomically precise control of the nitrogen configurations during the doping process remains a challenge in the synthesis of N-graphene. Moreover, additional structural transformations of the graphene carbon network structure as a side-effect of plasma doping are little understood and are as of yet uncontrollable. Therefore, we theoretically investigated the nitrogen doping process of graphene for a range of nitrogen atom incident kinetic energies in nonequilibrium quantum chemical molecular dynamics (QM/MD) simulations. We observed and characterized prominent configurations of N-containing graphene. In analogy to similar, earlier studies of graphene plasma hydrogenation, we observed an Eley–Rideal associative desorption mechanism during the graphene plasma nitrogenation, producing molecular nitrogen. Especially for graphitic-N (Gr-N) and Stone–Wales-defect-N (SW-N) configurations, which are frequently observed in experimental studies, we discovered two typical chemical reaction mechanisms which were well categorized by two key processes: adsorption of primary nitrogen dopant and collision with a secondary nitrogen dopant. Here, we discussed effects of the incident nitrogen energy on the formation mechanism, and propose a method to generate of Gr-N and SW-N configurations selectively by tuning the conditions with respect to the two key formation processes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

How does acetonitrile modulate single-walled carbon nanotube diameter during CVD growth?

There is a commercial demand for single-walled carbon nanotubes (SWCNTs) with uniform diameters and ( n, m ) chiralities. Yet, controlling these structural parameters in practice remains a challenge. Recent studies have shown that acetonitrile reversibly modulates SWCNT diameter during chemical vapour deposition (CVD) growth. Here we propose a mechanism to explain this phenomenon using non-equilibrium quantum chemical molecular dynamics simulations. We reveal that acetonitrile-derived radicals actively abstract hydrogen from surface hydrocarbon species as the SWCNT nucleates. This forms hydrogen (iso)-cyanide as a principal chemical product, and decreases the overall surface carbon density during nucleation. By liberating hydrogen, the number of dangling bonds present at the interface of the nucleating carbon structure is increased, which in turn accelerates SWCNT nucleation kinetics. Critically, the number of pentagon rings formed in the SWCNT precursor cap structure increases. Because the nucleation kinetics are much faster than the kinetics of ring defect healing, the pentagons become ‘trapped’ in the growing SWCNT cap structure, and this leads to more highly-curved SWCNT caps. As a result, these more highly-curved caps, combined with the lower surface carbon density and the faster kinetics of nucleation and growth, will ultimately yield narrower-diameter SWCNTs in the presence of acetonitrile.

36 MATERIALS SCIENCE↗

Density-Functional Tight-Binding for Platinum Clusters and Bulk: Electronic vs Repulsive Parameters

We present a general purpose Pt-Pt density-functional tight-binding (DFTB) parameter for Pt clusters as well as bulk, using a genetic algorithm (GA) to automatize the parameterization effort. First we quantify the improvement possible by only optimizing the repulsive potential alone, and second we investigate the effect of improving the electronic parameter as well. During both parameterization efforts we employed our own training set and test sets, with one set containing ~20,000 spin-polarized DFT structures. We analyze the performance of our two DFTB Pt-Pt parameter sets against density functional theory (DFT) as well as an earlier DFTB Pt-Pt parameters. Our study sheds light on the role of both repulsive and electronic parameters with regards to DFTB performance.

36 MATERIALS SCIENCE↗

A femtomolar-range suicide germination stimulant for the parasitic plant Striga hermonthica

The parasitic plant Striga hermonthica has been causing devastating damage to the crop production in Africa. Because Striga requires host-generated strigolactones to germinate, the identification of selective and potent strigolactone agonists could help control these noxious weeds. In this work, we developed a selective agonist, sphynolactone-7, a hybrid molecule originated from chemical screening, that contains two functional modules derived from a synthetic scaffold and a core component of strigolactones. Cooperative action of these modules in the activation of a high-affinity strigolactone receptor ShHTL7 allows sphynolactone-7 to provoke Striga germination with potency in the femtomolar range. We demonstrate that sphynolactone-7 is effective for reducing Striga parasitism without impinging on host strigolactone-related processes.

59 BASIC BIOLOGICAL SCIENCES↗

Chiral-selective etching effects on carbon nanotube growth at edge carbon atoms

We report that chemical vapor deposition (CVD) utilizing metal cluster nanoparticle catalysts is commonly used to synthesize carbon nanotubes (CNT), with oxygen-containing species such as water or alcohol included in the feedstock for enhanced yield. However, the etching effect of these additives on the growth mechanism has rarely been investigated, despite evidence suggesting that etching potentially affects the chirality distribution of product CNTs. We used quantum chemical methods to study how water-based etchant radicals (OH and H) may enhance the chiral selectivity during CVD growth using CNT cap models. Chemical reactivities of the caps with the etchant radicals were evaluated using density functional theory (DFT). It was found that the reactivities on the cap edges correlate with the chirality of the caps. Finally, these results suggest that proper selection of etchant species can provide opportunities for selective chirality control of the product CNTs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

When finite becomes infinite: convergence properties of vibrational spectra of oligomer chains

We present a computational study of convergence properties of vibrational IR and Raman spectra for a series of increasingly long units of polyethylene, cis- and trans-polyacetylenes, and polyynes. Convergent behavior to the spectra of infinitely long polymers was observed in all cases when chains reached lengths of approximately 60 carbon atoms, both with respect to the positions of the bands and to their intensities. The vibrational spectra of longer chains are practically indistinguishable. The convergence rate depends on the degree of the π conjugation in a studied system: Vibrational spectra for oligoethylenes converge noticeably faster than the spectra for the conjugated systems. Here, the slowest convergence is observed for skeletal motions of the oligomer chains, which may require more than a hundred carbon atoms in the chain to show deviations smaller than 1 cm –1 to the corresponding solid-state calculations. The results suggest that the boundary between the properties of finite and infinite molecular systems fades away for a surprisingly small number of atoms.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Light-Emitting Covalent Organic Frameworks: Fluorescence Improving via Pinpoint Surgery and Selective Switch-On Sensing of Anions

Covalent organic frameworks (COFs) offer ordered π structures that are useful for developing light-emitting materials. However, most COFs are weak in luminescence. Here we report the conversion of less emissive COFs into light-emitting materials via a pinpoint surgery on the pore walls. Deprotonation of the N–H bond to form an anionic nitrogen species in the hydrazone linkage can eliminate the nitrogen-related fluorescence quenching pathway. The resulting COF enhances the fluorescence in a linear proportion to the progress of deprotonation, achieving a 3.8-fold improved emission. Finally, this pinpoint N–H cleavage on the pore walls can be driven only by the fluoride anion while other halogen anions, including chloride, bromide, and iodide, remain inactive, enabling the selective fluorescence switch-on sensing of the fluoride anion at a ppb level.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Theoretical Prediction and Analysis of the UV/Visible Absorption and Emission Spectra of Chiral Carbon Nanorings

In this study, UV/vis absorption and emission spectra of recently synthesized chiral carbon nanorings were simulated using first-principles-based molecular dynamics and time-dependent density functional theory (TD-DFT). The chiral carbon nanorings are derivatives of the [n]cycloparaphenylene ([n]CPP) macrocycles, containing an acene unit such as naphthalene, ([n]CPPN), anthracene ([n]CPPA), and tetracene ([n]CPPT), in addition to n paraphenylene units. In order to study the effect of increasing molecular size on absorption and emission spectra, we investigated the cases where n = 6 and 8. Frontier molecular orbital analysis was carried out to give insight into the degree of excitation delocalization and its relationship to the predicted absorption spectra. The lowest excited singlet state S 1 corresponds to a HOMO–LUMO π–π* transition, which is allowed in all chiral carbon nanorings due to lack of molecular symmetry, in contrast to the forbidden HOMO–LUMO transition in the symmetric [n]CPP molecules. The S 1 absorption peak exhibits a blue-shift with increasing number of paraphenylene units in particular for [n]CPPN and [n]CPPA and less so in the case of [n]CPPT. In the case of CPPN and CPPA, the transition density is mainly localized over a semicircle of the macrocycle with the acene unit in its center but is strongly localized on the tetracene unit in the case of CPPT. Molecular dynamics simulations performed on the excited state potential energy surfaces reveal red-shifted emission of these chiral carbon nanorings when the size of the π-conjugated acene units is increased, although the characteristic [n]CPP blue-shift with increasing paraphenylene unit number n remains apparent. Finally, the anomalous emission blue-shift is caused by the excited state bending and torsional motions that stabilize the π HOMO and destabilize the π* LUMO, resulting in an increasing HOMO–LUMO gap.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-energy hydrogen uptake by small-cage C n and C n-1 B fullerenes

We present a theoretical study of the hydrogen uptake capability of carbon fullerene cages Cn and their boron-doped heterofullerene equivalents C n-1 B, with n = 20, 40, and 60, irradiated by hydrogen atoms in an impact energy range of 0.1–100 eV. In order to predict exohedral and endohedral hydrogen captures as well as the scattering probability of hydrogen for various cage types and sizes, we perform quantum-classical molecular dynamics (QCMD) calculations using the self-consistent-charge density-functional tight-binding (SCC-DFTB) method. Maximum endohedral hydrogen capture probabilities of 20% for n = 60 and 14% for n = 40 are found at impact energies close to 15 eV for both C n and C n-1 B systems. For n = 20, however, endohedral capture is observed at a maximum of 2%, while the exohedral capture reaches a maximum of 5% both at 15 eV. Similar results for the hydrogen capture are obtained by classical molecular dynamics based on the ReaxFF potential. Lastly, the stopping cross section per carbon atom from the QCMD simulations for all cage sizes displays a linear dependence on the projectile velocity with a threshold at 0.8 eV, and extrapolates well to the available theoretical data.

08 HYDROGEN↗

Quantum chemical replica-exchange umbrella sampling molecular dynamics simulations reveal the formation mechanism of iron phthalocyanine from iron and phthalonitrile

Phthalocyanine (Pc) and its metal complexes (MPcs) have been used industrially since their discovery in the early 20th century. The phthalonitrile (PN) method is a well-known synthesis method in which Pc or MPc can be afforded by heating a mixture of PN and metal powders over 280 °C with only moderate yield. However, the formation mechanism of the phthalocyanines and the intermediate stages of this seemingly simple reaction have yet to be fully understood. To study this mechanism computationally, we carried out quantum chemical molecular dynamics (MD) simulations based on the density-functional tight-binding (DFTB) method, applying the replica-exchange umbrella sampling (REUS) method, starting from four PN molecules and one iron atom. The DFTB-REUS-MD simulations successfully yielded FePc, and a metastable structure very similar to FePc but with a reactive nitrene unit was also identified that might explain the incomplete conversion of the reactants into FePc. Furthermore, analysis of the MD trajectories reveals a three-step FePc formation mechanism for the PN method.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Decoding Oxyanion Aqueous Solvation Structure: A Potassium Nitrate Example at Saturation

We present that the ability to probe the structure of a salt solution at the atomic scale is fundamentally important for our understanding of many chemical reactions and their mechanisms. The capability of neutron diffraction to “see” hydrogen (or deuterium) and other light isotopes is exceptional for resolving the structural complexity around the dissolved solutes in aqueous electrolytes. We have made measurements using oxygen isotopes on aqueous nitrate to reveal a small hydrogen-bonded water coordination number (3.9 ± 1.2) around a nitrate oxyanion. This is compared to estimates made using the existing method of nitrogen isotope substitution and those of computational simulations (>5–6 water molecules). The low water coordination number, combined with a comparison to classical molecular dynamics simulations, suggests that ion-pair formation is significant. Finally, this insight demonstrates the utility of experimental diffraction data for benchmarking atomistic computer simulations, enabling the development of more accurate intermolecular potentials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Inducing regioselective chemical reactivity in graphene with alkali metal intercalation

First principles calculations demonstrate that alkali metal atoms, intercalated between metal substrates and adsorbed graphene monolayers, induce localised regions of increased reactivity. The extent of this localisation is proportional to the size of the alkali atom and the strength of the graphene–substrate interaction. Thus, larger alkali atoms are more effective (e.g. K > Na > Li), as are stronger-interacting substrates (e.g. Ni > Cu). Despite the electropositivity of these alkali metal adsorbates, analysis of charge transfer between the alkali metal, the substrate and the adsorbed graphene layer indicates that charge transfer does not give rise to the observed regioselective reactivity. Instead, the increased reactivity induced in the graphene structure is shown to arise from the geometrical distortion of the graphene layer imposed by the intercalated adsorbed atom. Finally, we show that this strategy can be used with arbitrary adsorbates and substrate defects, provided such structures are stable, towards controlling the mesoscale patterning and chemical functionalisation of graphene structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Implementation of replica-exchange umbrella sampling in GAMESS

In GAMESS-US quantum chemistry package, both replica-exchange molecular dynamics (REMD) and the umbrella sampling (US) methods are available. However, prior to this work, the replica-exchange umbrella sampling (REUS) method, combining REMD and US, was not implemented. Here, REUS affords a more efficient conformational sampling than the conventional US method and is often used in MD simulations. We implemented REUS in GAMESS-US and improved some routines of the existing REMD code. A density-functional tight-binding REMD (DFTB-REMD) simulation of alanine deca-peptide and a DFTB-MD REUS simulation of proton transfer in malonaldehyde were performed. The results of DFTB-MD REUS simulations performed with three different simulation packages were compared to validate our GAMESS-US implementation.

97 MATHEMATICS AND COMPUTING↗

Ruthenium Nanoparticle-Decorated Porous Organic Network for Direct Hydrodeoxygenation of Long-Chain Fatty Acids to Alkanes

With the rapidly diminishing fossil fuel resources, development of a new strategy for synthesis of biofuels from renewable resources can provide a sustainable alternative to our energy demand. In this work, we present the design, synthesis, and characterization of a new porous organic network (TpPON) through acid-catalyzed condensation of 1,3,5-triformylphloroglucinol (Tp) and triphenylamine (TPA). Ru 0 nanoparticles are successfully fabricated at the porous surface of TpPON to obtain a novel catalytic system Ru@TpPON, which exhibits excellent catalytic performance together with outstanding stability for the hydrodeoxygenation of various vegetable oils to long-chain alkanes in water, and thus TpPON has wide potential for large-scale biodiesel production from renewable resources.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Parametrization and Benchmark of Long-Range Corrected DFTB2 for Organic Molecules

In this paper, we present the parametrization and benchmark of long-range corrected second-order density functional tight binding (DFTB), LC-DFTB2, for organic and biological molecules. The LC-DFTB2 model not only improves fundamental orbital energy gaps but also ameliorates the DFT self-interaction error and overpolarization problem, and further improves charge-transfer excited states significantly. Electronic parameters for the construction of the DFTB2 Hamiltonian as well as repulsive potentials were optimized for molecules containing C, H, N, and O chemical elements. We use a semiautomatic parametrization scheme based on a genetic algorithm. With the new parameters, LC-DFTB2 describes geometries and vibrational frequencies of organic molecules similarly well as third-order DFTB3/3OB, the de facto standard parametrization based on a GGA functional. Finally, LC-DFTB2 performs well also for atomization and reaction energies, however, slightly less satisfactorily than DFTB3/3OB.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Statistical Mechanics-Based Theoretical Investigation of Solvation Effects on Glucose Anomer Preferences

The importance of solvation effects on the stability of glucose anomers has been studied by the combination of quantum mechanics and statistical mechanics, namely, the reference interaction site model self-consistent field spatial electron density distribution. The preferences of α- and β-glucose in H 2 O are well reproduced with the obtained ratio of 35:65 for α- and β-glucose, respectively. Indirect interactions and bulk effects, described by the Onsager model, are relatively small compared to the direct solute–solvent interactions, especially in [DMIM]Cl and dimethyl sulfoxide. From the decomposition of solvation free energy and solvation structures, it can be seen that the interactions with the solvent molecules greatly contribute to the anomer preferences.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗