Engineering topics

Itabe, T.

Publications and source records attributed to Itabe, T..

6 records

NASA NTRS1986

Flight tests of a range-resolved airborne dial with two min-tea CO2 lasers

It is important to measure regional distributions of ozone concentrations in a short time for understanding a mechanism of photo-chemical smog development. An airborne Differential Absorption Lidar (DIAL) system with two low-power mini-TEA CO2 lasers was developed for measuring three-dimensional distributions of ozone in the lower troposphere. The CO2 DIAL is a nadir-looking system and is designed to measure ozone profiles between ground and airplane by using atmospheric aerosols as a distributed radar target. First flight test with a single laser were conducted in February 1985 over the Tokyo area. The system was operated at an altitude of 5000 ft. Results of the first flight tests show that the height profiles of the received power in the boundary layer were different between over land and ocean. The received power has to be inverted to an expression of a single optical parameter to see real aerosol distributions. Inversion of the lidar signal to the aerosol extinction was performed by using Klett's solution.

Itabe, T.↗

NASA NTRS1984

Phase-matching measurements for 10-microns upconversion in AgGaS2

Laboratory data from the upconversion of CO2 laser radiation using an AgGaS2 crystal pumped with a tunable dye laser are reported. Data were taken on the pump wavelength and bandwidth and the crystal acceptance angle for phase-matching. The results were compared with predictions made in terms of the upconversion conservation of energy and momentum and a model of the AgGaS2 refractive index. The trials were run with an annealed crystal apparently free of cracks, twins and optical scattering centers. The measurements indicated that more accurate refractrive-index data are required to be able to predict accurately the laser pump wavelength for phase-matching.

Itabe, T.↗

NASA NTRS1983

Frequency-doubled CO2 lidar measurement and diode laser spectroscopy of atmospheric CO2

A lidar instrument based on pulsed frequency-doubled carbon-dioxide lasers has been used at 4.88 microns for remote sensing of atmospheric carbon dioxide. A tunable-diode laser spectrometer provided the high-resolution spectroscopic data on carbon-dioxide line strength and line broadening needed for an accurate differential absorption measurement. Initial field measurements are presented, and instrument improvements necessary for accurate carbon dioxide measurement are discussed.

Bufton, J. L.↗

NASA NTRS1983

Airborne remote sensing measurements with a pulsed CO2 DIAL system

The present investigation is concerned with an optical radar instrument which has been developed for airborne remote sensing of atmospheric trace species at infrared wavelengths. The instrument makes use of compact, pulsed carbon dioxide lasers. It was designed for conducting differential absorption lidar (DIAL) measurements. The backscatter of laser pulse energy from the ocean and terrain surface is utilized to determine trace species column content. The instrument, which is carried by the NASA P3 aircraft, is used in a flight test program started in July 1981. The results obtained with the instrument in this program are discussed, taking into account ocean surface backscatter statistics, the ratio of ocean to terrain backscatter, the dual-wavelength correlation coefficient, the dual-wavelength cross-covariance, and the dependence of un-correlated noise variance on the mean backscatter signal.

Bufton, J. L.↗

NASA NTRS1982

Dual-wavelength correlation measurements with an airborne pulsed carbon dioxide lidar system

Dual-wavelength correlation data are presented for ground-level and airborne measurements of topographic and ocean backscatter near the 9.5-micron wavelength. Data were acquired with a pulsed carbon dioxide, dual-laser, dual-wavelength lidar system. The best system performance gave a dual-wavelength uncorrelated noise component of 2.8% and 9% standard deviation for ground-based and airborne data, respectively. This sets one limit on lidar measurement accuracy with a single pulse pair.

Bufton, J. L.↗

NASA NTRS1982

Application of upconversion detection to pulsed CO2 lidar

In this paper the application of an upconversion detector to pulsed CO2 lidar is investigated. In this device a nonlinear IR crystal would be used to convert 10-micron lidar radiation into the visible region for conventional detection with a photomultiplier tube. A pulsed CO2 lidar can be substantially improved with an upconversion detector configured for rejection of thermal background radiation using a narrowband filter for the upconverted signal or a cold filter front end. The sensitivity of the upconversion detector with the narrowband visible wavelength filter is estimated to be 2 orders of magnitude better than that of the usual direct detection diode. The cold filter can improve upconversion detection to nearly the signal-shot limit. These upconversion detectors are not limited by speckle noise as is a pulsed heterodyne detector.

Itabe, T.↗