Search NASASearch

Engineering topics

Ivanov, B. A.

Publications and source records attributed to Ivanov, B. A..

At least 19 records

Mars Express HRSC View of Western Olympus Mons: Evidence for Ice-bearing Deposit and High-Altitude Glaciation

This study is based on the geological analysis of the HRSC images taken on the orbit 0143 (12 m/px in nadir channel). The study area includes the western segment of Olympus Mons and the adjacent lowland plains (Fig. 1). Part of the volcano above the scarp is rather flat and is called "summit plateau" below. What is often called the volcano scarp is a slope classified into three morphologic types: Type 1 (S1 in Fig.1) is the steepest and dominated by ravines in its upper part and by talus beneath; Type 2 (S2) is intermediate in steepness and dominated by downslope trending linear depressions, part of which have channel-like morphology; and Type 3 (S3), is the most gentle and covered by lava flows, continuing from the summit plateau down to the lowland plains.

Basilevsky, A. T.

Shock Melting of Permafrost on Mars: Water Ice Multiphase Equation of State for Numerical Modeling and Its Testing

The presence of water/ice/brine in upper layers of Martian crust affects many processes of impact cratering. Modeling of these effects promises better understanding of Martian cratering records. We present here the new ANEOS-based multiphase equation of state for water/ice constructed for usage in hydrocodes and first numerical experiments on permafrost shock melting. Preliminary results show that due to multiple shock compression of ice inclusions in rocks the entropy jump in shocked ice is smaller than in pure ice for the same shock pressure. Hence previous estimates of ice melting during impact cratering on Mars should be re-evaluated. Additional information is included in the original extended abstract.

Ivanov, B. A.

Popigai Impact Structure Modeling: Morphology and Worldwide Ejecta

The approx. 100 km in diameter, 35.7 0.2 Ma old Popigai structure [1], northern Siberia (Russia), is the best-preserved of the large terrestrial complex crater structures containing a central-peak ring [2- 4]. Although remotely located, the excellent outcrops, large number of drill cores, and wealth of geochemical data make Popigai ideal for the general study of the cratering processes. It is most famous for its impact-diamonds [2,5]. Popigai is the best candidate for the source crater of the worldwide late Eocene ejecta [6,7].

Ivanov, B. A.

Anhydrite EOS and Phase Diagram in Relation to Shock Decomposition

In the context of the Chicxulub impact, it became recently obvious that experimental and theoretical research on the shock behavior of sulfates is essential for an assessment of the role of shock-released gases in the K/T mass extinction. The Chicxulub crater is the most important large impact structure where the bolide penetrated a sedimentary layer with large amounts of interbedded anhydrite (Haughton has also significant anhydrite in the target). The sulfuric gas production by shock compression/decompression of anhydrite is an important issue, even if the size of Chicxulub crater is only half of the so far assumed size. The comparison of experimental data for anhydrite, shocked with different techniques at various laboratories, reveals large differences in the threshold pressures for melting and decomposition. To gain insight into this issue, we have made a theoretical investigation of the thermodynamic properties of anhydrite. The project includes the review of data published in the last 40 years - reasons to study anhydrite cover a wide field of interests: from industrial problems of cement and ceramic production to the analysis of nuclear underground explosions in salt domes, conducted in the USA and USSR in the 1970th.

Ivanov, B. A.

Starting Conditions for Hydrothermal Systems Underneath Martian Craters: Hydrocode Modeling

Mars is the most Earth-like of the Solar System s planets, and the first place to look for any sign of present or past extraterrestrial life. Its surface shows many features indicative of the presence of surface and sub-surface water, while impact cratering and volcanism have provided temporary and local surface heat sources throughout Mars geologic history. Impact craters are widely used ubiquitous indicators for the presence of sub-surface water or ice on Mars. In particular, the presence of significant amounts of ground ice or water would cause impact-induced hydrothermal alteration at Martian impact sites. The realization that hydrothermal systems are possible sites for the origin and early evolution of life on Earth has given rise to the hypothesis that hydrothermal systems may have had the same role on Mars. Rough estimates of the heat generated in impact events have been based on scaling relations, or thermal data based on terrestrial impacts on crystalline basements. Preliminary studies also suggest that melt sheets and target uplift are equally important heat sources for the development of a hydrothermal system, while its lifetime depends on the volume and cooling rate of the heat source, as well as the permeability of the host rocks. We present initial results of two-dimensional (2D) and three-dimensional (3D) simulations of impacts on Mars aimed at constraining the initial conditions for modeling the onset and evolution of a hydrothermal system on the red planet. Simulations of the early stages of impact cratering provide an estimate of the amount of shock melting and the pressure-temperature distribution in the target caused by various impacts on the Martian surface. Modeling of the late stage of crater collapse is necessary to characterize the final thermal state of the target, including crater uplift, and distribution of the heated target material (including the melt pool) and hot ejecta around the crater.

Pierazzo, E.

Numerical Simulations of Silverpit Crater Collapse

The Silverpit crater is a recently discovered, 60-65 Myr old complex crater, which lies buried beneath the North Sea, about 150 km east of Britain. High-resolution images of Silverpit's subsurface structure, provided by three-dimensional seismic reflection data, reveal an inner-crater morphology similar to that expected for a 5-8 km diameter terrestrial crater. The crater walls show evidence of terrace-style slumping and there is a distinct central uplift, which may have produced a central peak in the pristine crater morphology. However, Silverpit is not a typical 5-km diameter terrestrial crater, because it exhibits multiple, concentric rings outside the main cavity. External concentric rings are normally associated with much larger impact structures, for example Chicxulub on Earth, or Orientale on the Moon. Furthermore, external rings associated with large impacts on the terrestrial planets and moons are widely-spaced, predominantly inwardly-facing, asymmetric scarps. However, the seismic data show that the external rings at Silverpit represent closely-spaced, concentric faultbound graben, with both inwardly and outwardly facing fault-scarps. This type of multi-ring structure directly analogous to the Valhalla-type multi-ring basins found on the icy satellites. Thus, the presence and style of the multiple rings at Silverpit is surprising given both the size of the crater and its planetary setting. A further curiosity of the Silverpit structure is that the external concentric rings appear to be extensional features on the West side of the crater and compressional features on the East side. The crater also lies in a local depression, thought to be created by postimpact movement of a salt layer buried beneath the crater.

Collins, G. S.

Large Scale Impacts and Triggered Volcanism

The idea of impact induced volcanism continues to blossom ([1-3] and other references). However, this appealing idea is seldom supported with an appropriate physical mechanism. The aim of this publication is to critically examine some frequently cited mechanisms of impact energy transformation into a trigger for terrestrial volcanism and magmatism.

Ivanov, B. A.

Energy, volatile production, and climatic effects of the Chicxulub Cretaceous/Tertiary impact

A comprehensive analysis of volatiles in the Chicxulub impact strongly supports the hypothesis that impact-generated sulfate aerosols caused over a decade of global cooling, acid rain, and disruption of ocean circulation, which contributed to the mass extinction at the Cretaceous/Tertiary (K/T) boundary. The crater size, meteoritic content of the K/T boundary clay, and impact models indicate that the Chicxulub crater was formed by a short period comet or an asteroid impact that released 0.7-3.4 x 10(31) ergs of energy. Impact models and experiments combined with estimates of volatiles in the projectile and target rocks predict that over 200 gigatons (Gt) each of SO2 and water vapor, and over 500 Gt of CO2, were globally distributed in the stratosphere by the impact. Additional volatiles may have been produced on a global or regional scale that formed sulfate aerosols rapidly in cooler parts of the vapor plume, causing an early, intense pulse of sulfuric acid rain. Estimates of the conversion rate of stratospheric SO2 and water vapor to sulfate aerosol, based on volcanic production of sulfate aerosols, coupled with calculations of diffusion, coagulation, and sedimentation, demonstrate that the 200 Gt stratospheric SO2 and water vapor reservoir would produce sulfate aerosols for 12 years. These sulfate aerosols caused a second pulse of acid rain that was global. Radiative transfer modeling of the aerosol clouds demonstrates (1) that if the initial rapid pulse of sulfate aerosols was global, photosynthesis may have been shut down for 6 months and (2) that for the second prolonged aerosol cloud, solar transmission dropped 80% by the end of first year and remained 50% below normal for 9 years. As a result, global average surface temperatures probably dropped between 5 degrees and 31 degrees K, suggesting that global near-freezing conditions may have been reached. Impact-generated CO2 caused less than 1 degree K greenhouse warming and therefore was insignificant compare to the sulfate cooling. The magnitude of sulfate cooling depends largely upon the rate of ocean mixing as surface waters cool, sink, and are replaced by upwelling of deep ocean water. This upwelling apparently drastically altered ocean stratification and circulation, which may explain the global collapse of the delta 13C gradient between surface and deep ocean waters at the K/T boundary.

NASA Center JPL

The depths of the largest impact craters on Venus

The largest impact craters on Venus may be used as evidence of various geological processes within the Venusian crust. We are continuing to construct a data base for the further investigation of large craters on Venus (LCV). We hope to find evidence of crater relaxation that might constrain the thickness and thermal gradient of the crust, as was proposed in an earlier work. The current work concentrates on 27 impact craters with diameters (d) larger than 70 km, i.e., large enough that the footprint of the Magellan altimeter has a good chance of sampling the true crater bottom. All altimeter echoes from points located within (d/2)+70 km from the crater center have been inspected.

Ivanov, B. A.

Global blackout following the K/T Chicxulub impact: Results of impact and atmospheric modeling

Several recent studies have suggested that shock decomposition of anhydrite (CaSO4) target rocks during the K/T Chicxulub impact would have ejected tremendous amounts of sulfur gas into the stratosphere. One of the many potential biospheric effects of this sulfur gas is the generation of a sulfuric acid (H2SO4) aerosol layer capable of causing darkness and severe disruption of photosynthesis for periods of years. In this paper we report the preliminary results of our modeling of shock pressures within the anhydrites and of light attenuation by the H2SO4 aerosol cloud. These models indicate that earlier studies over-estimated the amount of sulfur gas produced, but that more than enough was produced to extend global blackout conditions 4-6 times longer than the approximately 3 month predictions for silicate dust alone.

Pope, K. O.

Impact disturbance of the Venus atmosphere

Experimental simulations of the atmosphere-surface interaction during high-velocity impact are presented. At Venus an atmospheric vortex, generated with impact, may interact with a local wind. Some surface features, observed on Magellan images may be related with the simulated effect.

Provalov, A. A.

Geomechanical models of impact cratering: Puchezh-Katunki structure

Impact cratering is a complex natural phenomenon that involves various physical and mechanical processes. Simulating these processes may be improved using the data obtained during the deep drilling at the central mound of the Puchezh-Katunki impact structure. A research deep drillhole (named Vorotilovskaya) has been drilled in the Puchezh-Katunki impact structure (European Russia, 57 deg 06 min N, 43 deg 35 min E). The age of the structure is estimated at about 180 to 200 m.y. The initial rim crater diameter is estimated at about 40 km. The central uplift is composed of large blocks of crystalline basement rocks. Preliminary study of the core shows that crystalline rocks are shock metamorphosed by shock pressure from 45 GPa near the surface to 15-20 GPa at a depth of about 5 km. The drill core allows the possibility of investigating many previously poorly studied cratering processes in the central part of the impact structure. As a first step one can use the estimates of energy for the homogeneous rock target. The diameter of the crater rim may be estimated as 40 km. The models elaborated earlier show that such a crater may be formed after collapse of a transient cavity with a radius of 10 km. The most probable range of impact velocities from 11.2 to 30 km/s may be inferred for the asteroidal impactor. For the density of a projectile of 2 g/cu cm the energy of the impact is estimated as 1E28 to 3E28 erg. In the case of vertical impact, the diameter of an asteroidal projectile is from 1.5 to 3 km for the velocity range from 11 to 30 km/s. For the most probable impact angle of 45 deg, the estimated diameter of an asteroid is slightly larger: from 2 to 4 km. Numerical simulation of the transient crater collapse has been done using several models of rock rheology during collapse. Results show that the column at the final position beneath the central mound is about 5 km in length. This value is close to the shock-pressure decay observed along the drill core. Further improvement of the model needs to take into account the blocky structure of target rocks revealed by drilling.

Ivanov, B. A.

Largest impact craters on Venus

High-resolution radar images from the Magellan spacecraft have allowed us to perform a detailed study on 25 large impact craters on Venus with diameters from 70 to 280 km. The dimension of these large craters is comparable with the characteristic thickness of the venusian lithosphere and the atmospheric scale height. Some physical parameters for the largest impact craters on Venus (LICV), such as depth, ring/diameter ratio, and range of ballistic ejecta deposits, have been obtained from the SAR images and the altimetry dataset produced by MIT. Data related to each of these parameters is discussed.

Ivanov, B. A.

Low-emissivity impact craters on Venus

An analysis of 144 impact craters on Venus has shown that 11 of these have floors with average emissivities lower than 0.8. The remaining craters have emissivities between 0.8 and 0.9, independent of the specific backscatter cross section of the crater floors. These 144 impact craters were chosen from a possible 164 craters with diameters greater than 30 km as identified by researchers for 89 percent of the surface of Venus. We have only looked at craters below 6053.5 km altitude because a mineralogical change causes high reflectivity/low emissivity above the altitude. We have also excluded all craters with diameters smaller than 30 km because the emissivity footprint at periapsis is 16 x 24 km and becomes larger at the poles.

Weitz, C. M.

Cratering mechanics

Main concepts and theoretical models which are used for studying the mechanics of cratering are discussed. Numerical two-dimensional calculations are made of explosions near a surface and high-speed impact. Models are given for the motion of a medium during cratering. Data from laboratory modeling are given. The effect of gravitational force and scales of cratering phenomena is analyzed.

Ivanov, B. A.

Formation of the central uplift in meteoric craters

Data are presented on the sizes of impact craters with central uplifts on the earth, moon, and terrestrial planets. It is proposed that the central uplift of the Kara crater in the USSR was formed by impact metamorphism of rocks along a crater having a depth of about 600 meters. A theoretical analysis of the mechanics of hypervelocity impact cratering is used to investigate the features of shock-wave attenuation in the depths of the target and the amount of impact melt formed during this process. An attempt is made to determine the velocity of rock motion during the formation of central uplifts in terrestrial craters.

Ivanov, B. A.