Search NASA⌕ Search

Engineering topics

Ivanov, Evgeny

Publications and source records attributed to Ivanov, Evgeny.

High-Voltage Pulsed Power Generator for Beam Injection Systems

Beam injection systems in hadron colliders require kickers generating ±50 kV peak voltages into a 50 Ω impedance, with peak currents of 1000 A and sub-10 ns rise and fall times. This paper presents a novel high-voltage pulse power generator utilizing a distributed pulser architecture. It combines gallium nitride (GaN) transistors in a Marx topology with an inductive adder, achieving nanosecond-scale switching speeds and high-power efficiency. Compared to other solutions such as based on MOSFETs or fast ionization dynistors, our development offers superior peak and average power performance, reduced system complexity, and enhanced reliability, marking a significant step forward in high-voltage pulse generation for accelerator applications.

Smirnov, Alexander (ORCID:0000000280631691)↗

Ultralightweight Power System for Human-Portable Linac-Based X-Ray Sources

Industrial human-portable X-ray sources are widely used by security, nuclear safeguard, and defense agencies. However, the employed sources have significant energy, dose, size, weight, and power (SWaP) limitations, greatly affecting their practical application. RF linear accelerators (linacs) can serve as a flexible, reliable, and robust type of X-ray source if they can match the size, weight, cost, and imaging performance requirements of conventional ones. One of the most critical elements affecting these parameters is the high-voltage pulsed power supply system or modulator, which can make the largest contribution to the total weight and dimensions of the accelerator. Here, in this article, we present the design and demonstration results of a novel ultra lightweight power system based on a 24-kV solid-state Marx modulator for a hand-portable 0.15–2.0-MeV Ku -band linac-based X-ray source.

47 OTHER INSTRUMENTATION↗

Radioisotope replacement with compact electron linear accelerators

The replacement of radioactive sources with alternative technologies has been identified as a priority by international authorities, due to the risk of accidents and diversion by terrorists for use in Radiological Dispersal Devices. Many of these sources can be replaced with the X-rays produced by electron beams accelerated to MeV energies. However, the size, weight and costs of electron linacs must be significantly reduced to be considered for radioisotope replacement. RadiaBeam Technologies, LLC is developing a series of inexpensive compact electron accelerators in the 1–10 MeV range for radioisotope replacement such as Ir-192, Cs-137 and Co-60 for various applications. The dramatic level of miniaturization and cost-reduction was achieved thanks to the implementation of such innovative technologies as high-frequency magnetrons, split accelerating structure fabrication technology and solid-state Marx modulators. Here, in this paper, we overview RadiaBeam's compact linac developments, discuss the enabling technologies, and report on the current progress.

43 PARTICLE ACCELERATORS↗

Engagement opportunities in OECD NEA benchmark development

A myriad of opportunities is available to collaborate via international benchmark exercises and experimental data preservation activities. Many such opportunities abound under the auspices of the Nuclear Science Committee of the Organisation for Economic Co-operation and Development Nuclear Energy Agency (NEA). Key projects and activities of relevance to the development of advanced reactors design include the International Criticality Safety Benchmark Evaluation Project (ICSBEP), the International Reactor Physics Experiment Evaluation Project (IRPhEP), the International Assay Data of Spent Nuclear Fuel Database (SFCOMPO), the Shielding Integral Benchmark and Archive Database (SINBAD), and The International Experimental Thermal HYdraulicS Database (TIETHYS), and various cooperative benchmark exercises. Interested participants are encouraged to contact the leadership and secretariat of the various Technical Working Groups and Working Parties to become more engaged. This paper provides a summary of the current benchmark exercises and experimental databases available for international participation.

96 KNOWLEDGE MANAGEMENT AND PRESERVATION↗

Data Assimilation Needs for RR Performance Improvement

IRSN, being the French public body (TSO), is responsible for providing the public authorities with reference expertise and independent data on nuclear safety, security, nuclear material accounting, and protection of people and environment against ionizing radiation. At the same time it conducts a vast range of scientific studies in order to elaborate the safety rules, risk assessment methodology and to develop the competencies in the fields related to nuclear safety and radiation protection. Understanding that in general risks are driven by different kinds of uncertainties; including physically driven, external conditions and even human behavior. The uncertainties quantification and, therefore, an accuracy establishment are of interest for the different reasons. However certain unexpected benefits could be obtained using firmly calibrated high fidelity tools. One of the examples we are discussing hereinafter. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sensitivity studies to Support TEX critical experiments design

In the frame of the ongoing Thermal/Epithermal experiments program, supported by the DOE-NCSP, we are characterizing expected data with analysis of sensitivity coefficients to nuclear data. The computations were performed for detailed and simplified models of the experimental configurations in order to demonstrate their invariance with respect to small geometry variations. The sensitivity coefficients were computed with recently developed precise methodologies using Monte Carlo tools (MCNP-6.1, SCALE 6.1 and MORET 5.C.1) with the following nuclear data libraries: ENDF/B-VII.0, ENDF/B-VII.1, and JEFF3.1. Since the considered experiments are devoted to tantalum data validation, their neutronic characteristics are compared with the relevant integral experiment data collected in the OECD/NEA ICSBEP Handbook. Although analysis of sensitivity coefficients taken alone is insufficient for an entire assessment, we can conclude that TEX experimental results can fill gaps in the available benchmarks to facilitate quantification of uncertainty for plutonium containing systems with epithermal neutron spectra (e.g. wet plutonium-based powders). However, analysis of sensitivity profiles demonstrates that an advanced statistical methodology will be needed to fit tantalum nuclear data or to evaluate the associated uncertainties. (authors)

42 ENGINEERING↗

New type of N = 4 supersymmetric quantum mechanics

We overview a new type of supersymmetric quantum mechanics models based on the worldline realizations of the supergroup SU(2|1). Our main focus is on the models associated with the chiral multiplets (2,4,2). Considering two nonequivalent deformations of the standard N = 4, d = 1 superspace, we define the relevant chiral superfields and construct their SU(2|1) invariant actions. We give off- and on-shell descriptions of these models and perform their quantization. The basic peculiarities of such models and interrelations between them are briefly discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

N= 4 mechanics with diverse (4, 4, 0) multiplets: Explicit examples of hyper-Kähler with torsion, Clifford Kähler with torsion, and octonionic Kähler with torsion geometries

We present simple models of N= 4 supersymmetric mechanics with ordinary and mirror linear (4, 4, 0) multiplets that give a transparent description of Hyper-Kähler with Torsion (HKT), Clifford Kähler with Torsion (CKT), and Octonionic Kähler with Torsion (OKT) geometries. These models are treated in the N= 4 and N=2 superfield approaches, as well as in the component approach. Our study makes manifest that the CKT and OKT supersymmetric sigma models are distinguished from the more simple HKT models by the presence of extra holomorphic torsion terms in the supercharges.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Galilean conformal mechanics from nonlinear realizations

We apply the nonlinear realizations method for constructing new Galilean conformal mechanics models. Our starting point is the Galilean conformal algebra which is a nonrelativistic contraction of its relativistic counterpart. We calculate Maurer-Cartan one-forms, examine various choices of the relevant coset spaces, and consider the geometric inverse Higgs-type constraints which reduce the number of the independent coset parameters and, in some cases, provide dynamical equations. New Galilean conformally invariant actions are derived in arbitrary space-time dimension D=d+1 (no central charges), as well as in the special dimension D=2+1 with one exotic central charge. We obtain new classical mechanics models which extend the standard (D=0+1) conformal mechanics in the presence of d nonvanishing space dimensions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

N=4, 3D supersymmetric quantum mechanics in a non-Abelian monopole background

Using the harmonic superspace approach, we construct the 3D N=4 supersymmetric quantum mechanics of the supermultiplet (3,4,1) coupled to an external SU(2) gauge field. The off-shell N=4 supersymmetry requires the gauge field to be a static form of the 't Hooft ansatz for the 4D self-dual SU(2) gauge fields, that is a particular solution of Bogomolny equations for Bogomolny-Prasad-Sommerfeld monopoles. We present the explicit form of the corresponding superfield and component actions, as well as of the quantum Hamiltonian and N=4 supercharges. The latter can be used to describe a more general N=4 mechanics system, with an arbitrary Bogomolny-Prasad-Sommerfeld monopole background and on-shell N=4 supersymmetry. The essential feature of our construction is the use of semidynamical spin (4,4,0) multiplet with the Wess-Zumino type action.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗