Search NASA⌕ Search

Engineering topics

Iverson, Erik B.

Publications and source records attributed to Iverson, Erik B..

At least 19 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

The ORNL Moderator Test Station Science Case

Oak Ridge National Laboratory (ORNL) hosts two world-leading slow neutron sources, the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR), and is currently developing the technical design for a Second Target Station (STS) for the SNS. Upon completion of the STS project, ORNL will be uniquely positioned to optimize each of its three neutron sources, the SNS First Target Station (FTS), the STS, and HFIR, in a complementary way. Among the essential aspects of a re-imagined FTS and the current STS design are high-brightness parahydrogen moderators—moderators which are optimized for high per-unit-area neutron brightness rather than integrated-across-large-area neutron intensity. The high-brightness moderators proposed for the STS will, for the brightness metric, significantly outperform the coupled moderators currently on the FTS for appropriately optimized neutron beamlines, provided the moderating hydrogen is converted to near-equilibrium levels of parahydrogen (approximately 99.8% at 20 K). The original FTS moderators, by contrast, were conservatively designed to be relatively insensitive to the exact ortho:para ratio, with a consequent loss in performance. As a result, a redesign of the FTS moderators assuming fully converted parahydrogen could result in significant performance improvements on the FTS coupled moderators, and more consistent performance over time for all hydrogen moderators. This “parahydrogen problem” is a long-standing challenge for the effective implementation of hydrogen cold moderators at high-power neutron sources. In addition, the development of new moderator concepts, whether based on previously unused materials, structured heterogeneous arrays, or even simply on changes in overall shape and size is significantly restricted at a large-scale production facility intended to use the resulting neutron beams. Accordingly, moderators for production neutron sources are often designed in a very conservative, low-risk fashion, even though this compromises the absolute neutronic performance. Advanced moderator concepts worthy of study include features that could not be tested without redesigning and redeploying the entire existing reflector, shielding, and neutron beamline installation, making such development efforts far more expensive than building a stand-alone test facility.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Improved limits on n → n ' transformation from the Spallation Neutron Source

Conversions between neutrons n and dark matter candidate sterile neutrons n' have been proposed as a mechanism for baryon number $\mathscr{B}$ violation. In the case that there is a small mass difference Δ⁢m between the n and the n' states, oscillations can be induced by compensating for Δ⁢m with a magnetic field. A search for such neutron oscillations was performed at the Spallation Neutron Source by looking for anomalous neutron transmission through a strongly absorbing cadmium wafer inside of a 6.6 T magnet. The approach described here saw no regenerated neutrons above background, which provides an improved limit for neutron–sterile neutron transformations for a range of Δ⁢m between 0.1 and 1000 neV.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Comparison of the Neutronic Performance of IRP-1 and IRP-2 at SNS

The Spallation Neutron Source (SNS) operated from start-up, in May 2006, through December, 2017 before replacing the Inner Reflector Plug (IRP). This component is the most costly and time-consuming “regular maintenance” replacement foreseen in the operation of the First Target Station (FTS). The IRP includes beryllium reflector blocks, steel and aluminum support structures, aluminum moderator vessels (which in turn include gadolinium and cadmium neutron poisons) and water coolant systems. The lifetime of this multi-million dollar component is driven by poison and decoupler burnup in moderator vessels. The moderators include these neutron poisons to best match neutron beam performance with scattering instrument needs. The burnup that comes with use changes the performance of the moderators until they no longer server their intended purpose. The reasonable desire to maximize the IRP lifetime means that the moderator performance at the Beginning Of Life (BOL) is significantly “over poisoned” and different from the performance at moderator End Of Life (EOL). Upon installation of the second IRP article, IRP-2, the SNS Neutronics team characterized the performance of the neutron beamlines in order to assess the differences between them, primarily by comparing the EOL performance of IRP-1 to the BOL performance of IRP-2. While IRP-2 was largely similar to IRP-1 in its conceptual design, there were some differences in the specific design of IRP-2 to support enhanced manufacturability, and the change from IPR-1 to IRP-2 coincided with the replacement of the light water in the IRP cooling loop with heavy water, as had been intended in the SNS design but not implemented during construction because of heavy water availability.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2023

Comparative assessment of different aluminum alloys for neutron beam window applications

The choice of an aluminum alloy window along a neutron beam requires careful consideration depending on the requirements of the instrument end station. The windows should generally be thin to minimize loss of neutrons from the beam due to scattering and absorption but still thick enough to be structurally sound for safety requirements. Further, the microstructure of the material is dependent on the alloy and the preparation method and may introduce scattering artifacts or smearing of the instrument resolution that are not desirable. In this manuscript, SANS and total cross section measurements of several different aluminum alloys will be presented and compared in order to provide some useful insight to engineers working on future neutron instrument design.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2020

Non-static surfaces in MCNPX: The chopper extension

Rotating objects, such as choppers, are common components of a neutron beamline, and the motion of these components is not described in the static geometry of an MCNPX model. The special case of non-static surfaces for rotation about a stationary point in space has been developed for MCNPX. In addition, velocity dependent kinematics due to the motion of the medium have been implemented. This implementation allows for the simulation of rotating objects at speeds comparable to the velocity of cold neutrons. Applications of the chopper extension will be discussed, including the direct simulation of a bandwidth chopper system, the thermalization of neutrons inside a spinning material, and the discussion of the implementation of a spinning single crystal.

Grammer, Kyle↗
DOE OSTI2020

First Precision Measurement of the Parity Violating Asymmetry in Cold Neutron Capture on 3 He

We report the first precision measurement of the parity-violating asymmetry in the direction of proton momentum with respect to the neutron spin, in the reaction 3 He(n,p) 3 H, using the capture of polarized cold neutrons in an unpolarized active 3 He target. The asymmetry is a result of the weak interaction between nucleons, which remains one of the least well-understood aspects of electroweak theory. The measurement provides an important benchmark for modern effective field theory and potential model calculations. Measurements like this are necessary to determine the spin-isospin structure of the hadronic weak interaction. Our asymmetry result is A PV =[1.55±0.97(stat)±0.24(sys)]×10 -8 , which has the smallest uncertainty of any hadronic parity-violating asymmetry measurement so far.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2020

A Moderator Test Station at ORNL

Oak Ridge National Laboratory (ORNL) hosts two world-leading slow neutron sources, the Spallation Neutron Source (SNS) and the High Flux Isotope Reactor (HFIR), and is currently developing the technical design for a Second Target Station (STS) for the SNS. Upon completion of the STS project, ORNL will be uniquely positioned to optimize each of its three neutron sources, the SNS First Target Station (FTS), the STS, and HFIR, in a complementary way. Among the essential aspects of a reimagined FTS and the current STS concept are high-brightness parahydrogen moderators—moderators which are optimized for high per-unit-area neutron brightness rather than integrated-across-large-area neutron intensity. The high-brightness moderators proposed for the STS will significantly outperform the coupled moderators currently on the FTS for appropriately optimized neutron beamlines, provided the moderating hydrogen is converted to near-equilibrium levels of parahydrogen (approximately 99.8% at 20 K). The original FTS moderators, by contrast, were conservatively designed to be relatively insensitive to the exact ortho:para ratio, with a consequent loss in performance. As a result, a redesign of the FTS moderators assuming fully converted parahydrogen could result in significant performance improvements on the FTS coupled moderators, and more consistent performance over time for all hydrogen moderators. This “parahydrogen problem” is a long-standing challenge for the effective implementation of hydrogen cold moderators at high-power neutron sources. In addition, the development of new moderator concepts, whether based on previously unused materials, structured heterogeneous arrays, or even simply on changes in overall shape and size is significantly restricted at a large-scale production facility intended to use the neutron beams so produced. Accordingly, moderators for production neutron sources are often designed in a very conservative, low-risk fashion, even though this compromises the absolute neutronic performance. Advanced moderator concepts worthy of study include features that could not be tested without redesigning and redeploying the entire existing reflector, shielding, and neutron beamline installation, making such development efforts far more expensive than building a stand-alone test facility. We propose a Moderator Test Station (MTS) at the SNS with which we will verify such performance gains and test new moderator concepts. These concepts include both high-brightness and large-volume parahydrogen moderators, as well as moderators with tailored ortho:para hydrogen levels, heterogeneous moderator concepts such as the convoluted moderator or pelletized moderators, and moderators made of materials like ammonia, ethane, and oxygen clathrates, which have not been widely tested let alone deployed at neutron source facilities.

42 ENGINEERING↗
DOE OSTI2019

New search for mirror neutron regeneration

The possibility of relatively fast neutron oscillations into a mirror neutron state is not excluded experimentally when a mirror magnetic field is considered. Direct searches for the disappearance of neutrons into mirror neutrons in a controlled magnetic field have previously been performed using ultracold neutrons, with some anomalous results reported. We describe a technique using cold neutrons to perform a disappearance and regeneration search, which would allow us to unambiguously identify a possible oscillation signal. An experiment using the existing General Purpose-Small Angle Neutron Scattering instrument at the High Flux Isotope Reactor at Oak Ridge National Laboratory will have the sensitivity to fully explore the parameter space of prior ultracold neutron searches and confirm or refute previous claims of observation. This instrument can also conclusively test the validity of recently suggested oscillation-based explanations for the neutron lifetime anomaly.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

A Chopper Extension to model neutron transport with non-static surfaces and high-speed moving media in MCNPX 2.7

Neutron beamlines frequently include moving components such as neutron choppers. These components are typically wheels that rotate about a fixed axis in order to preferentially transmit or absorb neutrons of the desired energies. Capabilities were developed and implemented into MCNPX to include materials and surfaces in motion. In conclusion, the Chopper Extension implements rotating surfaces and media in MCNPX in order to provide a direct way to include rotating components in models for background calculation purposes.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2018

First Observation of 𝑃-odd 𝛾 Asymmetry in Polarized Neutron Capture on Hydrogen

Here, we report the first observation of the parity-violating gamma-ray asymmetry 𝐴$^{𝑛⁢𝑝}_{𝛾}$ in neutron-proton capture using polarized cold neutrons incident on a liquid parahydrogen target at the Spallation Neutron Source at Oak Ridge National Laboratory. 𝐴$^{𝑛⁢𝑝}_{𝛾}$ isolates the Δ⁢𝐼 =1, 3 𝑆 1 → 3 𝑃 1 component of the weak nucleon-nucleon interaction, which is dominated by pion exchange and can be directly related to a single coupling constant in either the DDH meson exchange model or pionless effective field theory. We measured 𝐴$^{𝑛⁢𝑝}_{𝛾}$=[−3.0±1.4⁢(stat)±0.2⁢(syst)]×10 −8 , which implies a DDH weak 𝜋⁢𝑁⁢𝑁 coupling of ℎ$^1_𝜋$=[2.6±1.2⁢(stat)±0.2⁢(syst)]×10 −7 and a pionless EFT constant of 𝐶 3 𝑆 1 → 3 𝑃 1 /𝐶 0 =[−7.4±3.5⁢(stat)±0.5⁢(syst)]×10 −11 MeV −1 . We describe the experiment, data analysis, systematic uncertainties, and implications of the result.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2018

The SNS Moderator Demonstration Facility

We describe a moderator demonstration facility at the Spallation Neutron Source (SNS). We will use the Beam Test Facility (BTF) at SNS to provide a moderator neutronics test stand with which we will verify the performance gains expected from the innovative moderator concepts central to the SNS Second Target Station. These concepts include large-volume para-hydrogen moderators and high-brightness moderators, as well as new moderator materials. The BTF provides a test facility for the new Radio-Frequency Quadrupole accelerator (RFQ) to be installed at SNS and produce a pulsed H− beam of 2.5 MeV energy. We will add to the BTF a beam chopper similar to that already used in the SNS at the RFQ exit, various beam transport components, a neutron-producing target, a cryogenic moderator test stand, a reflector-shielding assembly, and a performance assessment neutron beamline.

Iverson, Erik B.↗
DOE OSTI2018

Raman Spectroscopy as an ortho-para diagnostic of liquid hydrogen moderators

The intense radiation environment of a neutron moderator provides a mechanism for significant up-conversion of parahydrogen to orthohydrogen inside the moderator, as well as intrinsically catalyzing relaxation of orthohydrogen to parahydrogen. It is plausible that the steady-state orthohydrogen fraction of a moderator in a radiation environment such as at the Spallation Neutron Source (SNS) or the European Spallation Source (ESS) is as high as 30 % without supplemental catalysis. Direct measurement of the orthohydrogen fraction in the liquid hydrogen flow itself is essential to predict and monitor moderator performance, especially for thick or flat moderator concepts such as the ones that have been proposed for the ESS and for upgrades to the SNS. Raman spectroscopy provides a well-known method for directly measuring the hydrogen make-up in an unambiguous way. We describe our tests of Raman spectroscopy for application to the measurement of the orthohydrogen fraction of the hydrogen moderators at SNS and at the ESS. As part of this work, we have additionally developed a sample holder that has been used to perform simultaneous Raman and neutron vibrational spectroscopy on the VISION spectrometer at SNS. We discuss our plans to incorporate such a system as a diagnostic for liquid hydrogen moderators at SNS and at the ESS.

Gillis, Robert Chad↗
DOE OSTI2018

Characterization of a Liquid Ammonia Moderator

Liquid ammonia is an attractive intermediate temperature moderating material, offering a high hydrogen density, low tendency toward radiation-initiated polymerization, and broad accessible temperature range. The LENS collaboration has characterized decoupled poisoned liquid ammonia moderators in an attempt to validate scattering kernels we are generating. Additionally, we have measured a borated water moderator in order to test a model for predicting detailed moderator performance at one level of intrinsic homogeneous neutron capture based on measurements at other levels of such capture. We describe both sets of measurements, as well as use them to illustrate some of the reproducibility challenges associated with moderator characterization measurements on compact neutron sources.

Iverson, Erik B.↗
DOE OSTI2018

Neutron poison burnout and effects on SNS moderator performance

Detailed neutron absorber burnup calculations were performed for the poison plate and decoupler layers of the decoupled ambient water and liquid hydrogen moderators of SNS. Although local poison burnout was identified for the water moderator at 32 GWh and local decoupler burnout was becomes apparent at the hydrogen moderator at 37 GWh delivered proton beam energy, both moderators see major impacts to the moderator performance by increases of pulse widths and spectral changes only past the stated burnout energies.

Gallmeier, Franz X.↗
DOE OSTI2018

Options for a very cold neutron source for the second target station at SNS

Simulation work is underway to identify a very cold neutron source solution that would provide an order of magnitude higher neutron output than the conventional moderator suite. Moderator candidates such as water ice, beryllium, ortho-D2, CH4, and neon all solid at temperatures of 4-6 K were investigated. At present no moderator option was able to achieve the set goal; ortho-D2 and CH4 seem to be the most promising options.

Gallmeier, Franz X.↗
DOE OSTI2018

Beam power nonlinearity: twice the power, but not twice the neutrons?

Over the course of SNS operations, the neutronics team has observed indicators of a non-linear relationship between proton beam power and neutron brightness on multiple beamlines. As we prepare to replace the inner reflector plug, we have conducted our largest and most complete tests of this non-linearity in dedicated experiments. We will discuss our findings and subsequent experiments, their impact and our investigation of possible explanations for this behaviour.

Iverson, Erik B.↗