Search NASA⌕ Search

Engineering topics

J, Billinge S

Publications and source records attributed to J, Billinge S.

In-Situ Monitoring of Particle Growth at PEMFC Cathode under Accelerated Cycling Conditions

An in-situ method to measure changes in catalyst particle size at the cathode of a proton exchange membrane fuel cell is demonstrated. Synchrotron X-rays, 58 keV, were used to measure the pair distribution function on an operating fuel cell and observe the growth of catalyst particles under accelerated degradation conditions. The stability of Pt/C and PtCo/C with different initial particle sizes was monitored over 3000 potential cycles. The increase in particle size was fit to a linear trend as a function of cycles. The most stable electrocatalyst was found to be the alloyed PtCo with the larger initial particle size.

30 DIRECT ENERGY CONVERSION↗

Structural Study of Biotic and Abiotic Poorly-crystalline Manganese Oxides Using Atomic Pair Distribution Function Analysis

Manganese (Mn) oxides are among the most reactive natural minerals and play an important role in elemental cycling in oceanic and terrestrial environments. A large portion of naturally-occurring Mn oxides tend to be poorly-crystalline and/or nanocrystalline, with not fully resolved crystal structures. In this study, the crystal structures of their synthetic analogs including acid birnessite (AcidBir), {delta}-MnO{sub 2}, polymeric MnO{sub 2} (PolyMnO{sub 2}) and a bacteriogenic Mn oxide (BioMnO{sub x}), have been revealed using atomic pair distribution function (PDF) analysis. Results unambiguously verify that these Mn oxides are layered materials. The best models that accurately allow simulation of pair distribution functions (PDFs) belong to the monoclinic C12/m1 space group with a disk-like shape. The single MnO{sub 6} layers in the average structures deviate significantly from hexagonal symmetry, in contrast to the results of previous studies based on X-ray diffraction analysis in reciprocal space. Manganese occupancies in MnO{sub 6} layers are estimated to be 0.936, 0.847, 0.930 and 0.935, for AcidBir, BioMnO{sub x}, {delta}-MnO{sub 2} and PolyMnO{sub 2}, respectively; however, occupancies of interlayer cations and water molecules cannot be accurately determined using the models in this study. The coherent scattering domains (CSDs) of PolyMnO{sub 2}, {delta}-MnO{sub 2} and BioMnO{sub x} are at the nanometer scale, comprising one to three MnO{sub 6} layers stacked with a high disorder in the crystallographic c-axis direction. Overall, the results of this study advance our understanding of the mineralogy of Mn oxide minerals in the environment.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Revealing the Mechanisms behind SnO2 Nanoparticle Formation and Growth during Hydrothermal Synthesis: An In Situ Total Scattering Study

The formation and growth mechanisms in the hydrothermal synthesis of SnO{sub 2} nanoparticles from aqueous solutions of SnCl{sub 4} {center_dot} 5H{sub 2}O have been elucidated by means of in situ X-ray total scattering (PDF) measurements. The analysis of the data reveals that when the tin(IV) chloride precursor is dissolved, chloride ions and water coordinate octahedrally to tin(IV), forming aquachlorotin(IV) complexes of the form [SnCl{sub x}(H{sub 2}O){sub 6-x}]{sup (4-x)+} as well as hexaaquatin(IV) complexes [Sn(H{sub 2}O){sub 6-y}(OH){sub y}]{sup (4-y)+}. Upon heating, ellipsoidal SnO{sub 2} nanoparticles are formed uniquely from hexaaquatin(IV). The nanoparticle size and morphology (aspect ratio) are dependent on both the reaction temperature and the precursor concentration, and particles as small as 2 nm can be synthesized. Analysis of the growth curves shows that Ostwald ripening only takes place above 200 C, and in general the growth is limited by diffusion of precursor species to the growing particle. The c-parameter in the tetragonal lattice is observed to expand up to 0.5% for particle sizes down to 2-3 nm as compared to the bulk value. SnO{sub 2} nanoparticles below 3-4 nm do not form in the bulk rutile structure, but as an orthorhombic structural modification, which previously has only been reported at pressures above 5 GPa. Thus, adjustment of the synthesis temperature and precursor concentration not only allows control over nanoparticle size and morphology but also the structure.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Testing Different Methods for Estimating Uncertainties on Rietveld Refined Parameters Using SrRietveld

The advent of fast computing allows more computationally expensive, though possibly more accurate, approaches for estimating uncertainties on Rietveld refined parameters. Here we compare three such methods, using two different refinement programs, FullProf and GSAS. This is facilitated by the use of a new Rietveld refinement package, SrRietveld, that provides Python wrappers for FullProf and GSAS. The refined values on the parameters from two different refinement engines match each other very well. The uncertainty estimates determined using the different methods are also consistent, though FullProf and GSAS estimate the parameter uncertainties slightly differently from each other, which is discussed. More importantly, we find that the refined results are very sensitive to the statistical weights used in the least squares equation. Different weights, for example from uncertain or incorrectly propagated random errors on the data, lead to significantly different refined values. This means that uncertainty estimates on refined parameters should be increased when the random errors on the data are not well known, as for example in many cases where area detectors are used, and care should be taken to propagate errors correctly in any data preprocessing such as normalization by a smoothed spectrum. The computationally expensive bootstrap error estimation methods are facilitated by the use of SrRietveld, but are not required in most cases though may be useful in some cases, for example if the random errors on the data are not well known.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗