Multispectral Observations of Float Rocks Used to Investigate the Origin of Boulders on the Western Jezero Fan Front, Mars
Explore the source record for details and available documents.
B. S. Kathir↗
Engineering topics
J. I. Simon
Publications and source records attributed to J. I. Simon.
High‐Ti Melts From the Taurus‐Littrow Valley (TLV). A Product of Volcanism or Impact? An ANGSA Investigation Using the Station 3 Double Drive Tube 73001/73002
Explore the source record for details and available documents.
C. K. Shearer↗
The NASA Facility for Astromaterials Research at the Johnson Space Center – A National Laboratory for Planetary Research
The Astromaterials Research and Exploration Science (ARES) Division at the NASA Johnson Space Center houses a unique combination of laboratories, instruments, infrastructure, technical expertise, and other assets for conducting broad-based world-class planetary research. These facilities have been accessed for decades by hundreds of external scientists, including faculty, post-docs, students, and interns, most at no-cost and on a collaborative basis. With funding through NASA’s Planetary Science Enabling Facilities (PSEF) program, we have established the NASA Facility for Astromaterials Research (NFAR) to expand access to and enhance these laboratories for a diverse and inclusive external user base, focusing on training of the next generation of scientists and, thus, maximizing the science return from research funded by R&A programs in NASA’s Planetary Science Division (PSD). NFAR enables new planetary sample analyses, making new scientific discoveries possible, including training the next generation of planetary scientists. NFAR laboratories are co-located with JSC Curation that houses the NASA-controlled astromaterials collections, thus enabling direct access to both research and curation expertise, to facilitate specialized sample handling and analysis of allocated samples to sample PIs, particularly those affiliated with institutions that historically have limited access to or lack in-house analytical or experimental facilities.
J. I. Simon↗
Percolative Sulfide Core Formation in Oxidized Meteorite Parent Bodies
Most models of planetary differentiation involve the formation of metallic cores during or after extensive silicate melting, but some volatile-rich reservoirs in the protoplanetary disk did not accrete substantial amounts of Fe,Ni-metal. Instead, their potential core-forming assemblages were dominated by Fe,Ni-sulfides and oxides due to high ƒ O 2 and ƒ S 2 . Derivative melts from these assemblages may have been capable of percolative migration leading to core formation prior to silicate melting. However, no direct evidence for this process has been reported in meteoritic literature. Similarly, while many iron meteorites are thought to represent cores of their respective parent bodies, no direct evidence for Fe,Ni-sulfide/oxide cores have been reported to-date. The most promising potential for such evidence may be found in the anomalous noble metal trace element proportions of restitic oxidized primitive achondrites (i.e., brachinites, log ƒ O 2 ~IW-1), which are similar to those found in sulfides of Rumuruti-type chondrites (RCs) that contain only trace amounts of Fe,Ni-metal at log ƒ O 2 ≥ IW-1. This work addresses the following outstanding questions: (1) Are molten sulfides in oxidized meteorite assemblages capable of percolative melt migration? (2) How is this process recorded in the noble metal (i.e., siderophile/chalcophile) trace element geochemistry of relevant meteorites? (3) Did O,S-rich meteorite parent bodies form sulfide cores?
S. D. Crossley↗
The Isotopic Composition of Molecular Water Formed by Hydrogen Reduction of Iron Oxides: A Proxy for Endogenous Water Formed From Solar Wind Implantation
Many workers have successfully utilized a variety of lunar materials to infer the sources and processing history of volatiles on the Moon. In situ techniques via NanoSIMS have enabled a plethora of hydrogen isotope measurements of isolated grains in regolith and apatite within igneous rocks, revealing an extraordinarily large range of δD values from ~ -900 to +1000‰. The lowest of these δD values are related to the incorporation of solar wind hydrogen, which is pure 1 H. Exposure to solar wind results in structural damage to crystalline phases, forming ubiquitous tens-to-hundreds of nanometer thick amorphous rims on mature regolith grains. Solar wind implantation of H + is also is also thought to result in the formation of nanophase Fe 0 (npFe), a quantitative metric of surface exposure time (e.g., Is/FeO). The formation of npFe can be generally described via the reaction: Fe 2+ O + H 2 = Fe 0 + H 2 O, resulting in the formation of endogenous molecular water reservoirs.
lunar water↗
Key Perseverance Sampling Locations for the Ancient Martian Crust and Implications for Mars Science
Since Feb 2021, the Perseverance rover has collected samples in the Jezero crater. The plan baselined at the 2018 landing site selection, subsequently further developed by the Mars-2020 team, and presented to the Decadal Survey included the exploration and sampling of the Jezero crater rim and the Nili Planum area, a rock record that is important to preserving the science return of the endeavor. Specifically, the science team identified the following prioritized science objectives aligned with community objectives that are not covered by the current sample cache: 1) Investigate the habitable environments with potential biosignatures from a more ancient time interval and from a diverse set of geological environments (incl. exposed subsurface) than the Jezero crater sedimentary deposits (Fig. 2). (2) Determine radioisotopic ages for well-defined craterretaining surfaces and/or the Isidis basin impact event. (3) Characterize ancient aqueous environments to study climate, environmental transitions, and habitability on ancient Mars. (4) Investigate planetary accretion, crustal evolution, and dynamo activity through analysis and sampling of igneous lithologies. (5) Study the geology of basin-forming impacts. In addition, for the Jezero rim and any Jezero ejecta: (6) Analyze Jezero impactites for potentially habitable hydrothermal environments and radioisotopic dating of the Jezero crater formation. From 2018 to now, we used a combination of High Resolution Imaging Experiment (HiRISE) and Compact Reconnaissance Imaging Spectrometer for Mars (CRISM) data to further characterize Jezero rim and Nili Planum, culminating in our prioritized sample location recommendations: (1) Monument Valley and (2) Northwest Jezero rim.
Mars sample return↗
The Scientific Value of Collecting Samples From the Jezero Crater Rim
The Mars 2020 mission has been conducting ground-based investigation of the geology, habitability, and biosignature preservation potential and collecting samples for return to Earth in Jezero crater, Mars for nearly 3 years. Analysis of these samples will address outstanding questions in Mars science including potential habitability and how and why the climate the interior of the planet evolved through time. As of December 2023, samples of 4 igneous rocks of the Jezero crater floor and 9 sedimentary rocks of the Jezero fan and inner margin, remain on the rover. 15 tubes remain to be filled to enhance the diversity of the cache and broaden the scope of the science questions that can be addressed with returned sample studies. The next step in the mission is to explore the Jezero crater rim. It will be imperative to investigate and sample the diversity of crater rim rocks because they represent materials from Mars’ most ancient crust older than those sampled in Jezero crater, a diversity of geologic processes, and potential ancient habitable environments that have not yet been investigated or sampled. Ongoing mapping efforts are using orbiter data and long-distance images from Perseverance to identify and interpret the geologic context of the crater rim. Building on this effort and the broader geologic context for the crater rim put forward by previous studies, we identify diverse targets for in situ investigation and potential sampling by Mars 2020.
Mars sample return↗
Petrological Traverse of the Olivine Cumulate Séítah Formation at Jezero Crater, Mars: A Perspective From SuperCam Onboard Perseverance
Séítah is the stratigraphically lowest formation visited by Perseverance in the Jezero crater floor. We present the data obtained by SuperCam: texture by imagery, chemistry by Laser-Induced Breakdown Spectroscopy, and mineralogy by Supercam Visible and Infrared reflectance and Raman spectroscopy. The Séítah formation consists of igneous, weakly altered rocks dominated by millimeter-sized grains of olivine with the presence of low-Ca and high-Ca pyroxenes, and other primary minerals (e.g., plagioclase, Cr-Fe-Ti oxides, phosphates). Along a ∼140 m long section in Séítah, SuperCam analyses showed evidence of geochemical and mineralogical variations, from the contact with the overlying Máaz formation, going deeper in the formation. Bulk rock and olivine Mg#, grain size, olivine content increase gradually further from the contact. Along the section, olivine Mg# is not in equilibrium with the bulk rock Mg#, indicating local olivine accumulation. These observations are consistent with Séítah being the deep ultramafic member of a cumulate series derived from the fractional crystallization and slow cooling of the parent magma at depth. Possible magmatic processes and exhumation mechanisms of Séítah are discussed. Séítah rocks show some affinity with some rocks at Gusev crater, and with some Martian meteorites suggesting that such rocks are not rare on the surface of Mars. Séítah is part of the Nili Fossae regional olivine-carbonate unit observed from orbit. Future exploration of Perseverance on the rim and outside of the crater will help determine if the observations from the crater floor can be extrapolated to the whole unit or if this unit is composed of distinct sub-units with various origins.
Mars 2020↗
An olivine cumulate outcrop on the floor of Jezero crater, Mars
The geological units on the floor of Jezero crater, Mars, are part of a wider regional stratigraphy of olivine-rich rocks, which extends well beyond the crater. We investigate the petrology of olivine and carbonate-bearing rocks of the Séítah formation in the floor of Jezero. Using multispectral images and x-ray fluorescence data, acquired by the Perseverance rover, we performed a petrographic analysis of the Bastide and Brac outcrops within this unit. We find that these outcrops are composed of igneous rock, moderately altered by aqueous fluid. The igneous rocks are mainly made of coarse-grained olivine, similar to some Martian meteorites. We interpret them as an olivine cumulate, formed by settling and enrichment of olivine through multi-stage cooling of a thick magma body.
Mars↗
Corrigendum to: Volatiles in Lunar Felsite Clasts: Impact-related Delivery of Hydrous Material to an Ancient Dry Lunar Crust
Hydrous components were measured in nominally anhydrous minerals, primarily lunar feldspar, and reported by Simon et al. (2020). In the feldspar mineral structure, these components are contained in the form of OH, H2O, and/or NH4+molecules (Johnson, 2006 and references therein). The advantages of the ion microprobe technique employed by Simon et al. (2020) include high spatial resolution, apparent insensitivity to crystal orientation, high precision, and low detection limits, but unlike complementary spectroscopy techniques (i.e., FTIR) they preclude assignment of molecular species(Mosenfelder et al. 2015). Convention in the lunar sample community is to report major elemental abundances and hydrogen as oxides, H2O is the oxide for H. This convention was not followed by Simon et al. (2020), but rather the measured hydrogen component was reported as H to avoid the appearance of assigning the measured hydrogen concentration to a specific molecular species. The speciation of the hydrous component in terrestrial feldspars varies predominantly between OH and H2O, with no apparent correlation to feldspar composition, and only slight correlation to volcanic-to-plutonic igneous rock type (Johnson and Rossman, 2004).
J. I. Simon↗
Thermodynamic constraints on the textural evolution of eucrite, EET 90020
Basaltic eucrites, which are possibly parts of the Vestan crust, formed as either lava flows or intrusions, and can offer insights into early crust formation. However most eucrites have experienced thermal metamorphism, which exacerbates the challenges of understanding these samples. A variety of petrogenetic models such as, partial melting of a primitive source, fractional crystallization of magmas emplaced in a primitive crust, and/or partial melting of a eucritic source coupled with melt mixing and assimilation have been proposed in order to explain observed petrologic and chemical characteristics of eucrites. EET 90020 is an unbrecciated eucrite that has experienced significant thermal metamorphism, with temperatures of metamorphic equilibration calculated to be ~840-1040°C. Its petrologic history remains contentious, in part due to differences in trace element analyses [10,17, this work], which has led to multiple metamorphic interpretations [8,10-11]. Here, we combined petrologic observations, chemical analyses, and thermodynamic modeling, to interpret micro-domain textures identified in EET 90020 and better constrain its petrologic history. Ultimately, the development of such textures is a direct result of the geologic processes operating on a young Vesta or similar asteroid. Sample description: We identified three textural domains in EET 90020 (Figure 1); (I) A coarse grain domain with granoblastic plagioclase and pyroxene, (II) a medium grain domain with curved grain boundaries between plagioclase and pyroxene, and (III) a fine grain domain dominated by tridymite that fills in interstitial space between spherical plagioclase. Major element chemistry in phases is consistent across domains. Pyroxene have distinctive high Ca lamellae (Wo40.92En28.1Fs31.0) forming from the low-Ca pigeonite host (Wo3.5En33.7Fs62.8). There are small amounts of fayalitic olivine along pyroxene/oxide grain boundaries, where pyroxenes have reacted with ilmenite/chromite clasts. Plagioclase is anorthitic (Avg ~An88), with little variation (An86-92.5). Trace element bulk rock analyses were collected via ICP-MS and individual mineral analyses with LA-ICP-MS (Figure 2). The bulk sample has an observable enrichment in light rare earth elements, with a notable depletion in Eu. Plagioclase is enriched in LREEs, depleted in HREEs, and has a positive Eu anomaly while pyroxene is enriched in HREEs with a negative Eu anomaly. Variations in trace element analyses is likely influenced by the presence of phosphates because are highly enriched in REEs and have a dramatic effect on the bulk domain compositions. Thermodynamic modeling: The software package, Perple_X, was used to calculate mineral phase equilibria over a range of conditions using a Gibbs free energy minimization approach [12]. Models used all major/minor elements except P2O5. Thermodynamic properties from [13] were used to constrain endmember phase stabilities. Activity models were used to describe mixing in phases with solid solution. Isochemical P-T phase diagrams were constructed for the bulk thin section, and the coarse, medium and fine grain domain compositions. Domain compositions were determined using microprobe analyses of phases identified in each domain and observed modal mineral abundancies. Thermodynamically stable pyroxene compositions were extracted from model results and compared to pyroxene compositions collected via EMPA, allowing us to calculate temperatures for metamorphic equilibrium. Results: Results that use the coarse domain composition (Fig. 3a) demonstrate overlap at T ~ 1020°C indicating high T equilibration. There was no overlap for the medium and fine grain domains, or the bulk composition (e.g., Fig. 3b) indicating that these are not equilibrium assemblages. These results were replicated using data from [8,20]. Discussion: The disequilibrium results from the bulk rock, fine grain and medium grain models imply that EET 90020 was modified during and/or after peak metamorphism (open system behavior). However, this is in contrast to the coarse domain where it appears as if equilibrium was maintained. We suggest that this conflict is explained by highly localized equilibrium occurring at millimeter length-scales, which has been observed in terrestrial metamorphism where aqueous fluid infiltrate [14] or melt loss occurs [15]. It is unlikely that aqueous alteration was significant in modifying the bulk composition of EET 90020, because it lacks hydrated minerals. However, the presence of melt is supported by the presence of an abundance of curved grain boundaries and spherical grains in the medium and fine grain domains This contrasts the coarse domain, where grain boundaries are angular. Given the evidence for disequilibrium in the medium and fine grain domains, it would be inappropriate to draw additional conclusions about textural evolution using thermodynamic models of those domains. However, modeling results of the coarse grain domain, where equilibrium was maintained, can provide useful insights into the geologic evolution of EET 90020. We approximate maximum metamorphic temperatures, using the Ca component in pyroxene, at ~1020°C (Fig. 4), which is consistent with previous two-pyroxene thermometry [11]. At this temperature, up to 10 vol % melt can be produced in the coarse grain domain, which is at the boundary of minimum melt needed in order to segregate and form a melt network [16]. Tridymite and plagioclase would be the first minerals to melt out during heating starting ~990°C. This is consistent with the observed melt textures formed by tridymite and plagioclase in the fine grain domain. We suggest that a partial melting model best explains the textural development of EET 90020. Upon heating, melt generated was either trapped, resulting in no net change in the localized rock composition, or migrated, resulting in disequilibrium between pyroxene and the surrounding matrix. A positive Eu anomaly in plagioclase indicates that all of the plagioclase was melted previously. This is consistent with previous studies that have suggested that EET 90020 represents a residual eucrite that experienced partial melting and subsequent melt loss [8]. We speculate that partial melting could have occurred when EET 90020 was heated in the asteroid’s lower crust or adjacent to an intrusion [7]. Future work will study other, texturally heterogeneous samples to see if EET 90020 presents a unique circumstance or whether crustal partial melting was ubiquitous on the eucrite asteroid.
Eucrites↗
Microstructural Characterization of Felsite Fragments From the Apollo Next Generation Sample Analysis (ANGSA) Double Drive Tube 73001/73002
While the Moon’s surface is dominated by mafic igneous products formed through the crystallization of the lunar magma ocean, and the subsequent eruption of mare basalts – felsic magmatic fragments (variably referred to as felsites, granites, rhyolites or granophyres) have been identified from a number of Apollo samples (e.g. 12013[1], 14321[2], 15405[3] and 73215[4]). Magmatic edifices like the Gruithuisen Domes – silicic constructs sometimes found proximal to the basaltic mare provinces filling nearside basins, may represent a petrogenetic origin. However, this is, is complicated by the fact that they apparently predate mare volcanism (e.g. [5]). Additionally, crater-counting indicates that these silicic surface features also postdate radiogenic ages of Apollo felsites [6]. Various modes of felsic magmatism have been invoked to explain the presence of felsic lithologies on the Moon, including: 1) fractional crystallization and silicate liquid immiscibility; 2) partial melting of lunar crust through basaltic underplating; and 3) fractional crystallization of the mare parent magmas. Although these models are plausible, based on known Apollo samples and lunar meteorites, they are complicated by the lack of sample lithologies with intermediate composition between basaltic magmas and the felsic components, and the fact that partial melting of many crustal rock types on the Moon (e.g., anorthosite, troctolites) are unlikely to form granites. Along with other unique magmatic lithologies, new felsites have been identified within the < 1 mm size fractions of the ANGSA double drive core tube (73001/73002) from Apollo 17 station 3, sampling the light mantle landslide deposit from the South Massif [7]. These additional examples of lunar felsite will help us to better constrain the processes that lead to the formation of these evolved lithologies. To do this, we have employed a gambit of high-resolution scanning electron microscopy (SEM) and scanning transmission electron microscopy (TEM) analytical techniques, including electron backscatter diffraction (EBSD), cathodoluminescence and high-angle annular dark field (HAADF) imaging. These data provide unique insights into the felsite mineralogy and microstructures including the coexistence of quartz and tridymite in many of the fragments. In addition, these analyses provide petrological context and assist targeted in situ secondary ion mass spectrometry (SIMS) measurements of the U-Pb systematics of accessory minerals, and the volatile abundances and D/H ratios of apatite grains identified within the clasts.
lunar↗
Stratigraphic Relationships of the Western Delta and Crater Floor in Jezero Crater From Rimfax Gpr Observations.
One of the most fundamental questions about the geology of Jezero prior to the arrival of Mars 2020 Perseverance rover was the relative sequence of emplacement of the western delta and the adjacent crater floor terrain. Based on orbital evidence, some authors favored delta formation to post-date crater floor emplacement, though crater floor material appears to exhibit embaying relationships in other areas. An older crater floor would also be inconsistent with the crater floor material consisting of lake or eroded delta sediments, which would be syn- or post-depositional with the delta.
P. S. Russell↗
The Nasa Facility for Astromaterials Research at the Johnson Space Center – A National Laboratory for Planetary Research.
The Astromaterials Research and Exploration Science (ARES) Division at the NASA Johnson Space Center has established the NASA Facility for Astromaterials Research (NFAR) through the NASA Planetary Science Enabling Facilities program. NFAR is designed to provide access to our unique combination of laboratories, instruments, infrastructure, and technical expertise for conducting broad-based world-class planetary research. NFAR enables direct access to both research and curation expertise, to facilitate specialized sample handling and analysis of astromaterials and planetary analog materials. NFAR users from institutions that historically have limited access to or lack in-house analytical or experimental facilities are particularly encouraged to apply. We issue three calls for user proposals each year due the last day of April, July, and November. We award NFAR research projects to users in a competitive peer-reviewed proposal process. NASA-funded research in active PSD R&A proposals is prioritized along with requests from early-career/next-generation scientists, under-represented minorities, and those PIs from minority serving institutions. There is no cost to use the analytical facility, but researchers are required to be in person for analyses. Proposals to use NFAR labs are limited to < 5 pages and focus on the scientific purpose of the investigation and its relevance to NASA PSD, the labs to be accessed, and the time needed for the investigation. More information can be found at: https://ares.jsc.nasa.gov/research/nasa-facility-astromaterials-research/.
J. Filiberto↗
Trace Element Abundances Measured in Concentric and Texturally Distinct Fine-Grained Rims Surrounding Allende Chondrules
Layered rims of dust-sized material surround some chondrules and other early formed nebular particles, such as calcium aluminum inclusions in chondritic meteorites. In the Allende meteorite most chondrules(~85%) are un-rimmed and in direct contact with the host matrix material [1]. When present, rim thickness appears correlated to underlying particle size in both the Allende and Murchison chondrites [1,2]. This diverse behavior strongly argues for pre-parent body formation of rimmed particles as they traversed distinct (cooler and/or dustier) nebular environments [1]. Nebular rim formation involves accretion of unequilibrated dust to chondrule surfaces, recording evidence for the formation of at least two separate particle populations (chondrules and dust) that interacted in the nebula, and therefore potentially record distinct nebular reservoirs (e.g. [3-5]). Additionally, some particles exhibit textural evidence for multiple rim layers, (e.g., [1], further investigated herein). Herein, we evaluate the chemistry of concentrically and texturally distinct chondrule rim layers to investigate the possibility of discrete rim formation events recorded by individual chondrules (Fig. 1A,B). Using laser ablation inductively coupled plasma mass spectrometry (LA-ICPMS) we measure major, minor, and trace elements of the rims and particles in Allende. Samples were characterized in detail previously by electron microanalysis for their mineralogy, textures, particle size, and rim thickness(es) [1].
Chondrites↗
The NASA Facility for Astromaterials Research at the Johnson Space Center – A National Laboratory for Planetary Research
The Astromaterials Research and Exploration Science (ARES) Division at the NASA Johnson Space Center has established the NASA Facility for Astromaterials Research (NFAR) through the NASA Planetary Science Enabling Facilities program. NFAR is designed to provide access to our unique combination of laboratories, instruments, infrastructure, and technical expertise for conducting broad-based world-class planetary research. NFAR enables direct access to both research and curation expertise, to facilitate specialized sample handling and analysis of astromaterials and planetary analog materials. NFAR users from institutions that historically have limited access to or lack in-house analytical or experimental facilities are particularly encouraged to apply. We award NFAR research projects to users in a competitive peer-reviewed proposal process. Proposals to use NFAR labs are limited to <5 pages and focus on the scientific purpose of the investigation and its relevance to NASA Planetary Science Division (PSD) objectives, the labs to be accessed, and the time needed for the investigation. There is no deadline for proposals, and proposals will be reviewed on a rolling basis. NASA-funded research in active PSD R&A proposals is prioritized along with requests from early-career/next-generation scientists, under-represented minorities, and to Principal Investigators from minority-serving institutions. More information on the NFAR labs and preparing and submitting a proposal can be found at: https://ares.jsc.nasa.gov/research/nasa-facility-astromaterials-research/.
E. Rampe↗
Mineral composition of Al-rich float rocks in Jezero crater as seen by Super-Cam
During its traverse across the Jezero crater floor and western fan, the Perseverance rover encountered > 4000 float rocks – of variable size (up to ~ 50 cm) scattered on the ground without apparent connection to the surrounding stratigraphy [1]. Analysis performed using the SuperCam instrument’s [2,3,4], Laser Induced Breakdown Spectroscopy (LIBS) revealed a high concentration of Al 2 O 3 , Cr, Ti and Ni [5], and very low of Fe, Mg, Ca and Na [5, 1]. SuperCam’s infrared reflectance spectroscopy (IRS, between 1.3 and 2.6 μm) showed the presence of Al-rich aqueous alteration minerals (characteristic absorption bands of kaolinite and Al-smectites at 1.4 and 2.2 μm) as well as some (likely Cr-) spinels, identified uthrough their broad asymmetric 2 μm band, responsible for the concavity of IR spectra. These mineral species alone do not fully account for the spectral shapes; hence, the objective is to further investigate spectral modeling to determine the most probable mineral assemblages. Here, we present the results of modeling 17 light-toned float rocks, up to Sol 924, complementary to [1].
C. Royer↗
Biosignature Preservation Potential of Sulfate-Rich Rocks From Hogwallow Flats, Jezero Crater, Mars
The Mars 2020 Perseverance Rover discovered fine grained sedimentary rocks in the Hogwallow Flats member of the Shenandoah Formation at the ~3.6- to 3.8-billion-year-old Jezero crater, Mars. Mudstones and sandstones at the 3-meter-thick Hogwallow Flats (HWF) outcrop, and a laterally equivalent outcrop known as “Yori Pass”, show extensive evidence of diagenesis (alteration after deposition). Enhanced preservation of organic matter and other biosignatures can occur in early diagenetic environments associated with aqueous alteration in a lake, floodplain or pro-deltaic setting, as envisaged for HWF and Yori Pass [1]. Three drilled rock cores were collected from HWF-type bedrock as part of the Mars Sample Return Program. They are considered to be the samples with the highest potential to preserve organic compounds and biosignatures out of all samples collected so far by Perseverance (as of mission Sol 1000) [2]. This work outlines the implications of diagenesis for biosignature preservation in rock samples for possible return to Earth.
Mars 2020↗