Engineering topics
Publications and source records attributed to J.G. Mantovani.
A system of embedded sensors that can be incorporated into the wheel of any future mission rover would provide for a simple and fairly unobtrusive way to measure the distribution of electrostatic fields on the Martian surface and to measure variations in soil electrostatic response. This technology could perhaps be applied to different types of sensors that require the mobility provided by a rover s wheel.
Lunar lander plumes are known to accelerate fine dust to speeds exceeding 2 km/s, and the resultant ejecta may remain in lunar orbit for extended periods of time. Such ejecta could become hazardous to objects in lunar orbit as well as systems on the surface. In order to understand the impact on orbiting lunar infrastructure such as Gateway, as well as assets on the lunar surface, here we consider the dynamics of the resultant high-velocity plume ejecta. Initial conditions were set by the expected near-term lunar activity and the known cone of accelerated dust generated by previous lunar landings. The effects of regular 3-body gravitation, solar radiation pressure, and electric field are included in the model. It is found that although the majority of sub-μm dust is carried away by solar wind and electric fields, about ~10% of the dust between 1.7 km/s and 2.3 km/s reimpacts the surface, much of it near the landing site. The hazard posed by that debris is a function of lander mass and distance from the landing site. The Gateway, when orbiting in the nominal NRHO at the time of a landing, is not expected to be significantly affected by the dust. However, other spacecraft in less elliptic orbits may be at greater risk.
The accumulation of Lunar dust on various surfaces is the subject of much recent study, yet is still poorly understood. Recent plans to return humans to the Moon as part of the Artemis program mean that the presence of robust infrastructure to support a permanent human presence is inevitable. Power supply systems, such as Radioisotope Thermoelectric Generators are a likely part of that infrastructure, but require radiative thermal dissipation through a series of radiator fins to function effectively. In this work, the results of a parametric study of the impact on radiator efficiency due to various quantities and types of lunar dust simulants are presented, determining that the impact from low levels of lunar dust accumulation is not significantly detrimental to the efficiency of Multi-Mission Radioisotope Thermoelectric Generator performance in a vacuum, but increased fidelity of data would improve these findings.
Regolith conveying will be an essential task for supplying regolith feedstock to In-Situ Resource Utilization (ISRU) reactor systems for regolith processing on the Moon and Mars. The Vertical Lunar Regolith Conveyor (VLRC) is a technology being developed at NASA Kennedy Space Center (KSC) as a regolith transport task for the GCD ISRU FLEET project led by NASA Glenn Research Center (GRC). Single test loop versions of the VLRC are being developed at NASA KSC as a technology demonstration for a flight experiment. The NASA Flight Opportunities program selected the VLRC for a technology demonstration opportunity on a future Blue Origin New Shepard suborbital launch vehicle to study regolith transport physics in a relevant environment in a vacuum chamber under simulated lunar gravity conditions in order to advance its technology readiness level (TRL) for future space applications. The VLRC system includes four primary subsystems to achieve the objectives of the lunar gravity (Lunar-G) flight experiment. (1) An eccentric vibratory conveyor stack to convey regolith particles consisting of three single-loop helical surface conveyors with each actuated by two vibratory motors that vibrate in unison. One of the three single-loops contains a 0.8°-3.1° inclined helical path and the other two contain a 1.6°-6.2° incline. (2) A stick-slip conveyor stack to convey regolith particles consisting of three single-loop helical surface conveyors with each actuated by the same motor to move in unison in a stick-slip motion. One of the three single-loops contains a 0.8°-3.1° inclined helical path and the other two contain a 1.6°-6.2° incline. (3) A regolith containment system to contain the regolith in each single-loop track during launch before the start of the experiment using containment caps that will be lifted in unison at the start of Lunar-G. (4) COTS cameras will record the motion of regolith and tracer particles. Post-flight analysis of the videos will be used to determine convey speeds and flow rates. The VLRC experiment will use the well-known technique of Particle Image Velocimetry (PIV) image analysis to determine the velocity of tracer particles entrained in the regolith flow. This velocity will be used to calculate the mass flow rate of the regolith being conveyed.
Explore the source record for details and available documents.