Engineering topics
Jackson, J.
Publications and source records attributed to Jackson, J..
The 2003 Bam (Iran) earthquake: Rupture of a blind strike-slip fault
A magnitude 6.5 earthquake devastated the town of Bam in southeast Iran on 26 December 2003. Surface displacements and decorrelation effects, mapped using Envisat radar data, reveal that over 2 m of slip occurred at depth on a fault that had not previously been identified. It is common for earthquakes to occur on blind faults which, despite their name, usually produce long-term surface effects by which their existence may be recognised. However, in this case there is a complete absence of morphological features associated with the seismogenic fault that destroyed Bam.
Design of a switch matrix gate/bulk driver controller for thin film lithium microbatteries using microwave SOI technology
This paper presents a design approach to help attain any random grouping pattern between the microbatteries. In this case, the result is an ability to charge microbatteries in parallel and to discharge microbatteries in parallel or pairs of microbatteries in series.
Aerosol properties over dark water from MISR multi-angle imaging
Explore the source record for details and available documents.
Complex Deformation in Eastern Iran: Implications from SAR Interferometric Analysis of the 10 May 1997 Zirkuh MW = 7.2 Earthquake
Explore the source record for details and available documents.
Applications of SAR Interferometry to Surface Deformation in Central and Southwest Asia
Explore the source record for details and available documents.
Hydrazine Detection with a Tunable Diode Laser Spectrometer
Several instruments have been developed to measure low concentrations of hydrazine but none are completely satisfactory. A brief review is presented of current instruments such as the electrochemical cell, the ion mobility spectrometer, the mass spectrometer, the gas chromatograph, and the electronic nose.
FIFI: The MPE Garching/UC Berkeley Far-Infrared Imaging Fabry-Perot Interferometer
We describe the performance characteristics of the MPE Garching/UC Berkeley Far-Infrared Imaging Fabry-Perot Interferometer (FIFI) for the Kuiper Airborne Observatory (KAO). The spectrometer features two or three cryogenic tunable Fabry-Perot filters in series giving spectral resolution R of up to 10(exp 5) in the range of 40 microns less than lambda less than 200 microns, and an imaging 5x5 array of photoconductive detectors with variable focal plane plate scale. The instrument works at background limited sensitivity of up to 2 x 10(exp -19) W cm(exp -2) Hz(exp -1/2) per pixel per resolution element at R = 10(exp 5) on the KAO.
158 micron forbidden C II mapping of NGC 6946 - Probing the atomic medium
A well-sampled map (23 x 17 kpc) of the strong 158 micron forbidden C II cooling line in the Scd galaxy NGC 6946 at 55 arcsec resolution is presented which was taken with the MPE/UCB Far-infrared Imaging Fabry-Perot Interferometer (FIFI) in the Kuiper Airborne Observatory. It is concluded that the line emission in NGC 6946 is present in three spatially distinct components including nucleus, spiral arms, and extended region. An extended emission region is a source of most of the forbidden C II luminosity in NGC 6946. The 1 arcmin nuclear component has a line luminosity of 1.5 x 10 exp 7 solar luminosity and contributes 0.15 percent of the galaxy's total FIR luminosity. An extended component of forbidden C II emission is found to exist past the molecular extent of the galaxy and to be present to at least the full dimensions of the map. This component is attributed to a mixture of neutral and atomic clouds.
The 158 micron (CII) mapping of galaxies: Probing the atomic medium
Using the MPE/UCB Far-infrared Imaging Fabry-Perot Interferometer (FIFI) on the Kuiper Airborne Observatory (KAO), we have made large scale maps of (CII) in the spiral galaxies NGC 6946, NGC 891, M83 and the peculiar elliptical Cen A, thus allowing for the first time, detailed studies of the spatial distribution of the FIR line emission in external galaxies. We find that the (CII) emission comes from a mixture of components of interstellar gas. The brightest emission is associated with the nuclear regions, a second component traces the spiral arms as seen in the nearly face on spiral galaxies NGC 6946 and M83 and the largest star forming/H2 regions contained within them, and another extended component of low brightness can be detected in all of the galaxies far from the nucleus, beyond the extent of CO emission.
COBE navigation with one-way return-link Doppler in the post-helium-venting phase
The results of a navigation experiment with one way return link Doppler tracking measurements for operational orbit determination of the Cosmic Background Explorer (COBE) spacecraft are presented. The frequency of the tracking signal for the one way measurements was stabilized with an Ultrastable Oscillator (USO), and the signal was relayed by the Tracking and Data Relay Satellite System (TDRSS). The study achieved three objectives: space qualification of TDRSS noncoherent one way return link Doppler tracking; determination of flight performance of the USO coupled to the second generation TDRSS compatible user transponder; and verification of algorithms for navigation using actual one way tracking data. Orbit determination and the inflight USO performance evaluation results are presented.
Cosmic background explorer (COBE) navigation with TDRSS one-way return-link Doppler in the post-helium-venting phase
A navigation experiment was performed which establishes Ultra-Stable Oscillator (USO) frequency stabilized one way return link Doppler TDRSS tracking data as a feasible option for mission orbit determination support at the Goddard Space Center Flight Dynamics Facility. The study was conducted using both one way and two way Tracking and Data Relay Satellite System (TDRSS) tracking measurements for the Cosmic Background Explorer (COBE) spacecraft. Tracking data for a 4 week period immediately follow the depletion of the helium supply was used. The study showed that, for both definitive orbit solution and short term orbit prediction (up to 4 weeks), orbit determination results based on one way return link Doppler tracking measurements are comparable to orbit determination results based on two way range and two way Doppler tracking measurements.
A survey of the 158 micron forbidden C II fine-structure line in the central 50 parsecs of the Galaxy
NASA's Kuiper Airborne Observatory has been used to conduct an extensive, velocity-resolved survey at 1-arcsec resolution of the 158-micron forbidden C II fine-structure line emission in the central 50 pc of the Galaxy. The emission is found to be strongest toward the rotating circumnuclear disk surrounding Sgr A West; a continuous bridge of the emission connects the Sgr A complex to the thermal radio filaments in the radio arc 10 arcmin north of the center. This suggests a direct physical connection. The brightest emission occurs preferentially near the edges of the massive Galactic center molecular clouds. It is concluded that these clouds are predominantly ionized by external UV photons.
Effects of stellar outflows on interstellar sulfur oxide chemistry
Interferometer Maps with 2" to 6" resolution of a number of regions with active star formation (Orion A, W49, W51, SGRB2) show that the distribution of the molecule SO is very compact around stellar outflow sources. Both SO and SO2 were studied near three outflows, OrionA/IRc2 and two sources in W49. The two molecules have similar distributions and abundances. More than 95% of the emission comes from regions whose extents are only .05 to .2 pc., being larger around the more energetic sources. Their spectra are broad, 30 km/sec or more, suggesting that the oxide production is associated with the flows. The outflows are identified by water masers and by extended bipolar flows in SiO. Maps in other molecules, such as HCO+ and CS, which have similar collisional excitation requirements, have much greater spatial extent. Thus it appears that the SO and SO2 abundances are truly compact and are closely associated with the outflows.
Space and frequency-multiplexed optical linear algebra processor - Fabrication and initial tests
A new optical linear algebra processor architecture is described. Space and frequency-multiplexing are used to accommodate bipolar and complex-valued data. A fabricated laboratory version of this processor is described, the electronic support system used is discussed, and initial test data obtained on it are presented.
State estimation Kalman filter using optical processings Noise statistics known
Reference is made to a study by Casasent et al. (1983), which gave a description of a frequency-multiplexed acoustooptic processor and showed how it was capable of performing all the individual operations required in Kalman filtering. The data flow and organization of all required operations however, were not detailed in that study. Consideration is given here to a simpler Kalman filter state estimation problem. Equally spaced time-sampled intervals (k times T sub s, with k the iterative time index) are assumed. It is further assumed that the system noise vector w and the measurement noise vector v are uncorrelated and Gaussian distributed and that the noise statistics (Q and R) and the system model (Phi, Gamma, H) are known. The error covariance matrix P and the extrapolated error covariance matrix M can thus be precomputed and the Kalman gain matrix K sub k can be precomputed and stored for each input time sample.
Optical systolic array processor using residue arithmetic
The use of residue arithmetic to increase the accuracy and reduce the dynamic range requirements of optical matrix-vector processors is evaluated. It is determined that matrix-vector operations and iterative algorithms can be performed totally in residue notation. A new parallel residue quantizer circuit is developed which significantly improves the performance of the systolic array feedback processor. Results are presented of a computer simulation of this system used to solve a set of three simultaneous equations.
Frequency-multiplexed and pipelined iterative optical systolic array processors
Optical matrix processors using acoustooptic transducers are described, with emphasis on new systolic array architectures using frequency multiplexing in addition to space and time multiplexing. A Kalman filtering application is considered in a case study from which the operations required on such a system can be defined. This also serves as a new and powerful application for iterative optical processors. The importance of pipelining the data flow and the ordering of the operations performed in a specific application of such a system are also noted. Several examples of how to effectively achieve this are included. A new technique for handling bipolar data on such architectures is also described.