Search NASA⌕ Search

Engineering topics

Jakubikova, Elena

Publications and source records attributed to Jakubikova, Elena.

Coordination of copper within a crystalline carbon nitride and its catalytic reduction of CO 2

Inherently disordered structures of carbon nitrides have hindered an atomic level tunability and understanding of their catalytic reactivity. Starting from a crystalline carbon nitride, poly(triazine imide) or PTI/LiCl, the coordination of copper cations to its intralayer N-triazine groups was investigated using molten salt reactions. The reaction of PTI/LiCl within CuCl or eutectic KCl/CuCl 2 molten salt mixtures at 280 to 450 °C could be used to yield three partially disordered and ordered structures, wherein the Cu cations are found to coordinate within the intralayer cavities. Local structural differences and the copper content, i.e., whether full or partial occupancy of the intralayer cavity occurs, were found to be dependent on the reaction temperature and Cu-containing salt. Crystallites of Cu-coordinated PTI were also found to electrophoretically deposit from aqueous particle suspensions onto either graphite or FTO electrodes. As a result, electrocatalytic current densities for the reduction of CO 2 and H 2 O reached as high as ∼10 to 50 mA cm −2 , and remained stable for >2 days. Selectivity for the reduction of CO 2 to CO vs. H 2 increases for thinner crystals as well as for when two Cu cations coordinate within the intralayer cavities of PTI. Mechanistic calculations have also revealed the electrocatalytic activity for CO 2 reduction requires a smaller thermodynamic driving force with two neighboring Cu atoms per cavity as compared to a single Cu atom. These results thus establish a useful synthetic pathway to metal-coordination in a crystalline carbon nitride and show great potential for mediating stable CO 2 reduction at sizable current densities.

Chemistry↗

Observation of parallel intersystem crossing and charge transfer-state dynamics in [Fe(bpy) 3 ] 2+ from ultrafast 2D electronic spectroscopy

Transition metal-based charge-transfer complexes represent a broad class of inorganic compounds with diverse photochemical applications. Charge-transfer complexes based on earth-abundant elements have been of increasing interest, particularly the canonical [Fe(bpy) 3 ] 2+ . Photoexcitation into the singlet metal–ligand charge transfer ( 1 MLCT) state is followed by relaxation first to the ligand-field manifold and then to the ground state. While these dynamics have been well-studied, processes within the MLCT manifold that facilitate and/or compete with relaxation have been more elusive. We applied ultrafast two-dimensional electronic spectroscopy (2DES) to disentangle the dynamics immediately following MLCT excitation of this compound. First, dynamics ascribed to relaxation out of the initially formed 1 MLCT state was found to correlate with the inertial response time of the solvent. Second, the additional dimension of the 2D spectra revealed a peak consistent with a ~20 fs 1 MLCT → 3 MLCT intersystem crossing process. These two observations indicate that the complex simultaneously undergoes intersystem crossing and direct conversion to ligand-field state(s). Resolution of these parallel pathways in this prototypical earth-abundant complex highlights the ability of 2DES to deconvolve the otherwise obscured excited-state dynamics of charge-transfer complexes.

2-dimensional electronic spectroscopy↗

Lewis Acids and Electron-Withdrawing Ligands Accelerate CO Coordination to Dinuclear Cu I Compounds

A series of dinuclear molecular copper complexes were prepared and used to model the binding and Lewis acid stabilization of CO in heterogeneous copper CO 2 reduction electrocatalysts. Experimental studies (including measurement of rate and equilibrium constants) and electronic structure calculations suggest that the key kinetic barrier for CO binding may be a σ-interaction between CuI and the incoming CO ligand. The rate of CO coordination can be increased upon the addition of Lewis acids or electron-withdrawing substituents on the ligand backbone. Conversely, K eq for CO coordination can be increased by adding electron density to the metal centers of the compound, consistent with stronger π-backbonding. Lastly, the electrochemically measured kinetic results were mapped onto an electrochemical zone diagram to illustrate how these system changes enabled access to each zone.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Adaptive basis sets for practical quantum computing

Electronic structure calculations on small systems such as H 2 , H 2 O, LiH, and BeH 2 with chemical accuracy are still a challenge for the current generation of noisy intermediate-scale quantum (NISQ) devices. One of the reasons is that due to the device limitations, only minimal basis sets are commonly applied in quantum chemical calculations, which allows one to keep the number of qubits employed in the calculations at a minimum. However, the use of minimal basis sets leads to very large errors in the computed molecular energies as well as potential energy surface shapes. One way to increase the accuracy of electronic structure calculations is through the development of small basis sets better suited for quantum computing. In this work, we show that the use of adaptive basis sets, in which exponents and contraction coefficients depend on molecular structure, provides an easy way to dramatically improve the accuracy of quantum chemical calculations without the need to increase the basis set size and thus the number of qubits utilized in quantum circuits. As a proof of principle, we optimize an adaptive minimal basis set for quantum computing calculations on an H 2 molecule, in which exponents and contraction coefficients depend on the H—H distance, and apply it to the generation of H 2 potential energy surface on IBM-Q quantum devices. The adaptive minimal basis set reaches the accuracy of the double-zeta basis sets, thus allowing one to perform double-zeta quality calculations on quantum devices without the need to utilize twice as many qubits in simulations. This approach can be extended to other molecular systems and larger basis sets in a straightforward manner.

97 MATHEMATICS AND COMPUTING↗

Role of a 3D Structure in Energy Transfer in Mixed-Ligand Metal–Organic Frameworks

We present a detailed investigation of the photophysical properties of mixed-ligand pyrene- and porphyrin-based metal–organic frameworks (MOFs) as a function of their 3D structure. Solvothermal reactions between metal salts (InCl 3 , Zr(acac) 4 , and ZrCl 4 ) and suitable ratios of 1,3,6,8-tetrakis(p-benzoic acid)pyrene (TBAPy) and meso-tetrakis- (4-carboxyphenyl)porphyrin (TCPP) were performed to prepare a series of mixed-ligand ROD-7, NU-901, and NU-1000 MOFs. Time-resolved and steady-state fluorescence measurements were conducted on the mixed-ligand MOFs to study their photophysics. Based on the results, we concluded that upon excitation of TBAPy linkers in the MOFs, singlet excitation energy migrates across TBAPy linkers until it finds a TCPP unit. TCPP acts as an energy trap and quenches the excitation. The efficiency of TBAPy-to-TBAPy energy transfer was found to be sensitive to the structural parameters of MOFs. Analysis of steady-state and time-resolved fluorescence data revealed that excitation energy transfer (EET) is most efficient in ROD-7, followed by NU-901 and NU-1000. We propose that topology that invokes the shorter interchromophoric distances between TBAPy linkers in ROD-7 is responsible for its higher EET efficiency. The distance dependence of the EET rate constant (kEET) was investigated to gain insight into the mechanistic aspects of energy transfer in MOFs. This study revealed that (a) energy transfer in MOFs deviates from the classical Förster model and (b) the geometrical arrangement of linkers influences the mechanism of EET in MOFs. A theoretical investigation was also performed to determine energy-transfer rate constants along different directions and assess the directionality of energy transfer in these MOFs. The magnitude of rate constants indicated that energy transfer in ROD-7 should be highly anisotropic along the stacking direction. Furthermore, these findings suggest that ROD-7 is a promising candidate to play the role of the light-harvesting and energy-transfer component in solar energy conversion devices, where directional energy transfer is required.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Using Ultrafast X-ray Spectroscopy To Address Questions in Ligand-Field Theory: The Excited State Spin and Structure of [Fe(dcpp) 2 ] 2+

We have employed a range of ultrafast X-ray spectroscopies in an effort to characterize the lowest energy excited state of [Fe(dcpp) 2 ] 2+ (where dcpp is 2,6-(dicarboxypyridyl)pyridine). This compound exhibits an unusually short excited-state lifetime for a low-spin Fe(II) polypyridyl complex of 270 ps in a room-temperature fluid solution, raising questions as to whether the ligand-field strength of dcpp had pushed this system beyond the 5 T 2 / 3 T 1 crossing point and stabilizing the latter as the lowest energy excited state. Kα and Kβ X-ray emission spectroscopies have been used to unambiguously determine the quintet spin multiplicity of the long-lived excited state, thereby establishing the 5 T 2 state as the lowest energy excited state of this compound. Geometric changes associated with the photoinduced ligand-field state conversion have also been monitored with extended X-ray absorption fine structure. The data show the typical average Fe-ligand bond length elongation of ~0.18 Å for a 5 T 2 state and suggest a high anisotropy of the primary coordination sphere around the metal center in the excited 5 T 2 state, in stark contrast to the nearly perfect octahedral symmetry that characterizes the low-spin 1 A 1 ground state structure. This study illustrates how the application of time-resolved X-ray techniques can provide insights into the electronic structures of molecules—in particular, transition metal complexes—that are difficult if not impossible to obtain by other means.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Excited-State Switching between Ligand-Centered and Charge Transfer Modulated by Metal–Carbon Bonds in Cyclopentadienyl Iridium Complexes

Three series of pentamethylcyclopentadienyl (Cp*) Ir(III) complexes with different bidentate ligands were synthesized and structurally characterized, [Cp*Ir(tpy)L] n + (tpy = 2-tolylpyridinato; n = 0 or 1), [Cp*Ir(piq)L] n + (piq = 1-phenylisoquinolinato; n = 0 or 1), and [Cp*Ir(bpy)L] m + (bpy = 2,2'-bipyridine; m = 1 or 2), featuring a range of monodentate carbon-donor ligands within each series [L = 2,6-dimethylphenylisocyanide; 3,5-dimethylimidazol-2-ylidene (NHC); methyl)]. The spectroscopic and photophysical properties of these molecules and those of the photocatalyst [Cp*Ir(bpy)H] + were investigated to establish electronic structure–photophysical property relationships that engender productive photochemical reactivity of this hydride and its methyl analogue. The Ir(III) chromophores containing ancillary CNAr ligands exhibited features anticipated for predominantly ligand-centered (LC) excited states, and analogues bearing the NHC ancillary exhibited properties consistent with LC excited states containing a small admixture of metal-to-ligand charge-transfer (MLCT) character. Yet, the molecules featuring anionic and strongly σ-donating methyl or hydride ligands exhibited photophysical properties consistent with a high degree of CT character. Density functional theory calculations suggest that the lowest energy triplet states in these complexes are composed of a mixture of MLCT and ligand-to-ligand CT originating from both the Cp* and methyl or hydride ancillary ligands. The high degree of CT character in the triplet excited states of methyliridium complexes bearing C^N-cyclometalated ligands offer a striking contrast to the photophysical properties of pseudo-octahedral structures fac -Ir(C^N) 3 or Ir(C^N) 2 (acac) that have lowest-energy triplet excited states characterized as primarily LC character with a more moderate MLCT admixture.

14 SOLAR ENERGY↗

Electron Injection from Copper Diimine Sensitizers into TiO 2 : Structural Effects and Their Implications for Solar Energy Conversion Devices

Copper(I) diimine complexes have emerged as low cost replacements for ruthenium complexes as light sensitizers and electron donors, but their shorter metal-to-ligand-charge-transfer (MLCT) states lifetimes and lability of transient Cu(II) species impede their intended functions. Two carboxylated Cu(I) bis-2,9-diphenylphenanthroline (dpp) complexes [Cu(I)(dpp-O(CH2CH2O)(5))(dpp-(COOH)(2))](+) and [Cu(I)(dpp-O(CH2CH2O)(5))(dpp-(F-COOH)(2))](+) (F = tolyl) with different linker lengths were synthesized in which the MLCT-state solvent quenching pathways are effectively blocked, the lifetime of the singlet MLCT state is prolonged, and the transient Cu(II) ligands are stabilized. Aiming at understanding the mechanisms of structural influence to the interfacial charge transfer in the dye-sensitized solar cell mimics, electronic and geometric structures as well as dynamics for the MLCT state of these complexes and their hybrid with TiO2 nanoparticles were investigated using optical transient spectroscopy, X-ray transient absorption spectroscopy, time-dependent density functional theory, and quantum dynamics simulations. The combined results show that these complexes exhibit strong absorption throughout the visible spectrum due to the severely flattened ground state, and a long-lived charge-separated Cu(II) has been achieved via ultrafast electron injection (<300 fs) from the 1MLCT state into TiO2 nanoparticles. The results also indicate that the TiO2-phen distance in these systems does not have significant effect on the efficiency of the interfacial electron-transfer process. The mechanisms for electron transfer in these systems are discussed and used to develop new strategies in optimizing copper(I) diimine complexes in solar energy conversion devices.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗