Engineering topics

James Bridges

Publications and source records attributed to James Bridges.

25 records · Page 2

NASA NTRSDate not supplied

Diagnosing Noise Features Of Internally Mixed, External Plug Exhaust Systems

In internally mixed exhaust systems, a lobed or forced mixer is employed to mix the core and bypass streams before they exit the common nozzle. For moderate bypass-ratio engines this marginally improves thrust, and provides a significant acoustic benefit. Indeed, it has been thought that a fully mixed jet creates the lowest noise you can get from a two-stream engine. Typically, the forced mixer system produces a bit more noise than a fully mixed equivalent jet, noise that has been called “excess noise”. In recent testing, this excess noise seemed to be amplified when an external plug was employed in the exhaust system to reduce boattail drag. Identifying the mechanism of this excess noise and mitigating it is key to creating commercial supersonic vehicles that are acoustically acceptable around airports. This paper adds to that investigation, analyzing results from recent tests where far-field acoustic data were acquired on two sets of flows with matched fully mixed flow conditions. One set of flows had a heated core stream, making it a dual-stream jet. The other set had both streams heated to the same temperature, making a single-stream jet that matched the fully mixed temperature and velocity of the dual-stream jet. These flows were tested in two lobed-mixer exhaust systems with internal and external plugs. Analysis of flow and noise data from the nozzles with combinations of single- and dual-stream flows, and with and without flight streams, gives insight into how and why the noise of the dual-stream and single-stream jet differ. One additive source, present in nozzles both with and without external plugs, comes from inside the nozzle, likely the internal shear layer coming off the lobed mixer. This noise source is not impacted by a change in flight stream and has a distinctive spectral directivity that is amplified by the presence of the external plug. Finding the exact source mechanism of this new source will be key to making the internally mixed exhaust systems reach their lowest possible sound level.

Noise prediction↗

NASA NTRSDate not supplied

Study of a Plug Nozzle for Supersonic Aircraft Concepts

A plug nozzle with a cylindrical cowl is studied. The geometry is adopted following commercial supersonic aircraft concepts considered in an ongoing NASA program. For the given cowl, the plug geometry is varied that includes shapes developed by a numerical optimization study as well as porous plugs. Experimental data on noise and flow field are discussed with an eye for minimum noise at low nozzle pressure ratios (NPR2) representing landing and takeoff (LTO) conditions. NPR up to about 4.7 is covered in the experiments. Limited thrust data with accompanying numerical simulation results are also presented. Results show that a plug designed for optimum thrust at cruise is noisier while a plug designed for optimum thrust at LTO has less noise, throughout the NPR range covered. The results also show that a plug nozzle can generate transonic tones and excess broadband noise (EBBN) at lower NPR, apart from well-known screech tones and broadband shock associated noise (BBSN) at higher NPR. A long porous plug is found to effectively suppress all these aberrant noise components while suffering less than 1% loss in thrust coefficient.

Jets↗

NASA NTRSDate not supplied

Empirical Noise Modeling of Internally Mixed Exhaust Systems

There appear to be no non-proprietary methods to predict the noise of internally mixed exhaust systems, and no guidance for how to adapt known jet noise models for these configurations. This paper surveys literature and historical databases acquired at NASA Glenn's Aero-Acoustic Propulsion Lab to give such guidance. The core premise is that an exhaust system with well-designed mixer produces noise that is to first approximation the same as a fully-mixed jet flow. Refinement of what is meant by a “fully mixed jet” can lead to more accurate prediction of the main jet noise. Additional noise is often generated within the nozzle, typically at high frequencies, whose source mechanism(s) are not obvious. However, a noise prediction method can be established that captures some aspects of the excess noise and provide an estimate of the total jet noise. Explorations of source mechanisms associated with the internal mixer have led to a new noise model which includes the effects of having an external plug nozzle, a feature desirable for near-term supersonic aircraft. Statistical analysis of historical data is provided to estimate the uncertainty in using this method given the variations found that cannot be directly computed without detailed mixer geometry.

Noise Prediction↗

NASA NTRSDate not supplied

Empirical Noise Modeling of Internally Mixed Exhaust Systems

There appears to be no non-proprietary methods to predict the noise of internally mixed exhaust systems, and no guidance for how to adapt known jet noise models for these configurations. This paper surveys literature and historical databases acquired at NASA Glenn's Aero-Acoustic Propulsion Lab to give such guidance. The core premise is that an exhaust system with well-designed mixer produces noise that is to first approximation the same as a fully-mixed jet flow. Refinement of what is meant by a “fully mixed jet” can lead to more accurate prediction of the main jet noise. Additional noise is often generated within the nozzle, typically at high frequencies, whose source mechanism(s) are not obvious. However, a noise prediction method can be established that captures some aspects of the excess noise and provide an estimate of the total jet noise. Explorations of source mechanisms associated with the internal mixer have led to a new noise model which includes the effects of having an external plug nozzle, a feature desirable for near-term supersonic aircraft. Statistical analysis of historical data is provided to estimate the uncertainty in using this method given the variations found that cannot be directly computed without detailed mixer geometry.

Noise Prediction↗

NASA NTRSDate not supplied

Predicting Supersonic Noise at the Airport—Tech Challenge Wrapup

NASA has completed a Technical Challenge to reduce uncertainty of predicting the noise of future commercial supersonic aircraft around the airport. Noise prediction models being used to guide manufacturers and regulators have previously been based on conventional aircraft configurations. Aircraft configurations required for supersonic flight are not predicted well by these models. NASA used physics-based simulations along with some historical data to extend noise prediction models to cover aircraft designs typical of near-term market concepts. The presentation gives an overview of this work and its lasting accomplishments.

supersonic↗

NASA NTRSDate not supplied

Jet Noise Radiation in the Forward Arc Due to ‘Trapped Waves’ AAPL Test (6/17 - 7/11, 2024)

An experimental study is conducted investigating the characteristics of ‘trapped wave’ resonance tones in the forward arc of jet noise radiation fields. The results show that they indeed radiate in the forward arc (shallow upstream polar locations in the approximate range of <50°). This is found for high subsonic to supersonic jets up to the highest jet Mach number covered in the experiment (MJ1.9). With heated jets these spectral peaks get weakened especially around transonic conditions, however, they persist in supersonic conditions. Key results from the experiment are included in these presentation slides.

jets↗

NASA NTRSDate not supplied

Results of the NASA Prediction Uncertainty Reduction Tech Challenge

In January 2021 the Advanced Air Vehicles Program approved a new Tech Challenge (TC) to be run out of the Commercial Supersonic Technology (CST) Project. The objective of the TC was to bring uncertainties in the empirical noise modeling for civilian supersonic aircraft into the same range as that of conventional aircraft. The TC goal statement was to “Produce data and demonstrate tools that reduce the uncertainty in predicting Landing & Takeoff Noise levels of supersonic-relevant designs by 5 EPNdB and are ready for use in studies to inform FAA rule-making.” To make the required improvements in noise prediction methods for supersonic aircraft, NASA decided to validate and use high-fidelity numerical simulations to acquire the needed noise data on supersonic propulsion configurations. High-fidelity component designs were developed, such as a two-stage propulsor behind a supersonic inlet designed by General Electric Aviation and variable area exhaust systems using input from recent contracts with GE and Rolls Royce. A noise database was generated as a function of geometric and flow parameters, providing corrections to the empirical noise models and added new input variables to describe the complexities created by the supersonic-specific design features. Statistically, the new models were able to predict the acoustic impact of supersonic-specific features, the reduction in uncertainty being reduced from the baseline 7.8 EPNdB at the beginning of the TC to 2.0 EPNdB at the end.

noise prediction↗