Engineering topics
Publications and source records attributed to James G Mantovani.
This project focused on developing a COMSOL model to facilitate investigating CO2adsorption/desorption designs that are suitable for future integration into plant growth facilities and Environmental Control and Life Support System (ECLSS) for a microgravity environment.
When a lander vehicle launches or lands on the Moon, the rocket engine exhaust plume impinges on the surface and interacts with the regolith to create blast ejecta and associated cratering of the surface. Lunar regolith blast ejecta travels at high velocities (>2,000 m/s) for long distances (kilometers) in a vacuum environment [1] creating hazards for surrounding assets and it can also impact the bottom of the lander vehicle, risking damage to the engines, thermal insulation and sensors. Ballistic particles can possibly enter cislunar space and achieve orbit as debris, if the ejecta is sufficiently energetic. The cratering and regolith erosion can endanger the vehicle itself by affecting the soil stability under the landing gear. Landing on unpredictable terrain with varying topography, natural craters and rock hazards is also hazardous risks tipping a lander at dangerous angles in extreme conditions that may also violate maximum slope angles for subsequent launch operations. During launch (Figure 1), an overpressure pulse created by the ignition of the rocket engines can pose significant ejecta risks to the vehicle. Dust clouds raised during landing limit the efficacy of sensors and reduce visibility for the astronaut pilots, creating significant real-time risk during landing site selection by the pilot or computer navigation system. Future lunar spaceports will require mitigations to these launch and landing risks [2]. There are four main objectives of this effort:1) To establish the state of the art in LLP construction methodologies. 2) To propose criteria for trade studies of LLP concepts. 3) To publicly share the authors’ ideas for potential LLP solutions. 4) To serve as the starting point for future development of LLP technologies. Establishing the state of the art in the area of off-Earth Launch & Landing Pad concepts will base-line the work that has been completed thus far and highlight the wide span between current Technology Readiness Levels (TRLs)and operational readiness. The authors aim to communicate the need for funding in this area in the near term by illustrating that there is much work to be completed before a truly viable option exists. Setting forth criteria for trade studies of LLP concepts is important for several reasons. The first and most straightforward is to establish a framework for performing trade studies on LLP concepts. This will enable NASA to select the most promising concepts for continued development, and it will also help technology developers understand how their concepts compare with others and the priorities of development effort.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
Rocket plume-surface interaction is a multi-phase, complex discipline characterized by plume flow physics, erosion physics, and ejecta dynamics. To provide critical data for the validation of predictive modeling capabilities, an inert-gas, subscale ground test has been designed, with one test phase focused on cratering and ejecta and another test phase focused on plume structure and behavior. Using a supersonic, heated N2 jet impinging onto six different mechanical regolith simulants, visual data on the temporal evolution of cratering and ejecta are collected in a vacuum chamber at ambient pressures ranging from 600 Pa down to approximately 7 Pa. Using the same N2 jet impinging onto an instrumented plate, NO planar laser-induced fluorescence data are obtained at lower ambient pressures for the validation of both continuum and rarefied gas-phase physics. This paper discusses the design of this test and data products, with emphasis on the cratering and ejecta experiments, along with the physical scaling, challenges, and relevance of these data to the maturation of the plume-surface interaction discipline.
Kennedy Space Center’s (KSC) Swamp Works, provides government and commercial space ventures with the technologies required for working and living on the surfaces of the Moon or other planets and bodies in our solar system. The Swamp Works team establishes efficient, innovative and cost-effective exploration mission solutions through leveraging of partnerships across NASA, industry and academia. Concepts start small and build up momentum, with lean development processes and a hands-on approach. Testing is performed in early stages to drive design improvements and progressively increase Technology Readiness Levels (TRL). Swamp Works provides concepts, architecture studies and trades, designs, data, technology development, technology demonstration hardware, flight hardware, testing, flight support and knowledge in support of the development of surface systems. It consists of several teams with associated laboratories and test capabilities. The Granular Mechanics and Regolith Operations (GMRO) Laboratory and the Electrostatics and Surface Physics Laboratory (ESPL) are co-located in the Engineering Development Lab (EDL) facility high bay. The Applied Chemistry Lab (ACL) is in an adjacent facility and other KSC labs are being influenced by the innovation methods pioneered at the Swamp Works. The Swamp Works was founded in January 2013 by a group of scientists and engineers at KSC with the over-arching vision of expanding humanity and civilization into the solar system by the use of space resources via advanced technology. Ultimately, this will create a solar system economy that will improve the human condition due to the abundance of energy and resources. This presentation will summarize the projects and technology development that have been performed by the Swamp Works to celebrate its 10th Anniversary of innovation success.
Here we present a novel use of millimeter wave doppler radar to measure the velocity of ejecta generated by the impingement of rocket plumes on a planetary surface. The Dust Ejecta Radar Technology (DERT) provides a unique dataset based on direct measurements of ejecta particle velocities during plume-surface interactions. DERT is a continuous wave (CW) 94 GHz radar unit that is being developed at Kennedy Space Center. DERT has measured velocities of a pendulum (~ 1 m/s), a rotating strip (60 m/s), projected regolith simulant BP-1 (~ 250 m/s) and rifle rounds (~ 820 m/s). Signal-to-Noise Ratios of up to 60 dB have been demonstrated. Data collected from DERT will inform the development of high-fidelity computational models of plume-surface interaction effects and will help address NASA Strategic Knowledge Gaps related to characterizing entry, descent and landing effects, and the risks associated with high-speed ejecta on the lander and lunar surface assets.