Engineering topics
Janik, Michael J.
Publications and source records attributed to Janik, Michael J..
Deconvoluting charge-transfer, mass transfer, and ohmic resistances in phosphonic acid–sulfonic acid ionomer binders used in electrochemical hydrogen pumps
Ion-pair high-temperature polymer electrolyte membranes (HT-PEMs) paired with phosphonic acid ionomer electrode binders have substantially improved the performance of HT-PEM electrochemical hydrogen pumps (EHPs) and fuel cells. Here, blending poly(pentafluorstyrene-co-tetrafluorostyrene phosphonic acid) (PTFSPA) with Nafion™, and using this blend as an electrode binder, improved proton conductivity in the electrode layer resulting in a 2 W cm –2 peak power density of fuel cells at 240 °C (a HT-PEM fuel cell record). However, much is unknown about how phosphonic acid ionomers blended with perfluorosulfonic acid materials affect electrode kinetics and gas transport in porous electrodes. In this work, we studied the proton conductivity, electrode kinetics, and gas transport resistances of 3 types of phosphonic acid ionomers, poly(vinyl phosphonic acid), poly(vinyl benzyl phosphonic acid), and PTFSPA by themselves and when blended with Aquivion® (a perfluorosulfonic acid material).
Toward Understanding and Controlling Organic Reactions on Metal Oxide Catalysts
Metal oxides have structurally complex surfaces on which a variety of adsorption site types can occur, including cation sites, anion sites, oxygen vacancy sites, and Brønsted acid sites. These sites can catalyze the catalytic transformation of organic molecules via diverse routes, thus enabling H abstraction, O abstraction, C–C bond formation, and other reactions. This Perspective provides an update on recent advances and future directions for various organic reactions on metal oxide catalyst surfaces, particularly for C–H activation of alkanes and for C–C bond formation with organic oxygenate reactants. Here, we put emphasis on the molecular scale details, on the active site structures required to enable the formation of kinetically relevant transition states, energetic descriptors, as well as contemporary ideas to enable low activation energies. This progress has been enabled by specialized experiments and the increased capabilities of modern electronic structure calculations.
Stabilization of Dinuclear Rhodium and Iridium Clusters on Layered Titanate and Niobate Supports
Atomically dispersed organometallic clusters can provide well-defined nuclearity of active sites for both fundamental studies as well as new regimes of activity and selectivity in chemical transformations. More recently, dinuclear clusters adsorbed onto solid surfaces have shown novel catalytic properties resulting from the synergistic effect of two metal centers to anchor different reactant species. Difficulty in synthesizing, stabilizing, and characterizing isolated atoms and clusters without agglomeration challenges allocating catalytic performance to atomic structure. Here, we explore the stability of dinuclear rhodium and iridium clusters adsorbed onto layered titanate and niobate supports using molecular precursors. Both systems maintain their nuclearity when Statistical analysis of HAADF-STEM images revealed that rhodium and iridium dimers had mean cluster-to-cluster distances very similar to what is expected from a random distribution of atoms over a large area, indicating that they are dispersed without aggregation. The stability of dinuclear rhodium clusters supported on titanate nanosheets was also investigated by X-ray absorption fine structure (EXAFS), DRIFTS, and first-principles calculations. Both X-ray absorption spectroscopy and HAADF-STEM simulations, guided by density functional theory (DFT)-optimized structure models, suggested that rhodium dimers adsorb onto the nanosheets in an end-on binding mode that is stable up to 100 degrees C under reducing conditions. Finally, this study highlights that crystalline nanosheets derived from layered metal oxides can be used as model supports to selectively stabilize dinuclear clusters, which could have implications for heterogeneous catalysis.
Thermodynamic modeling of the Pd–Zn system with uncertainty quantification and its implication to tailor catalysts
Pd–Zn intermetallic catalysts show encouraging combinations of activity and selectivity on well-defined active site ensembles. Thermodynamic description of the Pd–Zn system, delineating phase boundaries and enumerating site occupancies within intermediate alloy phases, is essential to determining the ensembles of Pd–Zn atoms as a function of composition and temperature. Combining the present extensive first-principles calculations based on density functional theory (DFT) and available experimental data, the Pd–Zn system was remodeled using the CALculation of PHAse Diagrams (CALPHAD) approach. High throughput modeling tools with uncertainty quantification, i.e., ESPEI and PyCalphad, were incorporated in the phase analysis. Here, the site occupancies across the γ phase composition region were given special attention. A four-sublattice model was used for the γ phase owing to its four Wyckoff positions, i.e., the outer tetrahedral (OT) site 8c, the inner tetrahedral (IT) site 8c, the octahedral (OH) site 12e, and the cuboctahedral (CO) site 24g. The site fractions of Pd and Zn calculated from the present thermodynamic model show the occupancy preference of Pd in the OT and OH sublattices in agreement with experimental observations. The force constants obtained from DFT-based phonon calculations further supports the tendency of Pd occupying the OH sublattice compared with the IT and CO sublattice. The catalytic ensembles changing from Pd monomers (Pd 1 ) to trimers (Pd 3 ) on the surface of γ phase are attributed to the increase of Pd occupancy in the OH sublattice.
The Fe 2 O 3 (0001) Surface Under Electroreduction Conditions: A DFT Study of L-Cysteine Adsorption
Local catalyst surface structure and environment can play a significant role towards catalytic activity and selectivity. Surface functionalization using organic additives, such as amino acid chains or peptides, can alter surface properties. Density Functional Theory calculations are used to evaluate the potential dependent surface stability of different terminations of the Fe 2 O 3 (0001) surface. Adsorption of L-Cysteine in different redox states and through different binding modes (carboxylic: O-Fe, amine: N-Fe and thiol: S-Fe) is evaluated. At moderate electrochemical reducing conditions, Fe 2 O 3 (0001) exposes a partially reduced termination with both surface H atoms and undercoordinated Fe atoms in the outermost layer. L-Cysteine adsorption occurs most preferentially through carboxylic acid, O-Fe, binding and does not significantly alter the relative surface stability of different surface terminations. A partially reduced surface with L-Cysteine functionalization will be stable under electroreduction conditions. As a result, stable functionalization of an oxide material through amino acid chains or peptide adsorption may provide an additional design lever to develop improved catalytic systems.
Hydrogen Activation and Spillover on Anatase TiO 2 -Supported Ag Single-Atom Catalysts
Not provided.
Ring-opening and hydrodenitrogenation of indole under hydrothermal conditions over Ni, Pt, Ru, and Ni-Ru bimetallic catalysts
Here, the activity and selectivity of activated-carbon-supported Ni, Pt, Ru, and Ni-Ru bimetallic catalysts was examined for hydrothermal denitrogenation of indole. The molar yield of pyrrole ring-opening compounds, without an added hydrogen source, are in the order: Ni < Pt < Ni 90 Ru 10 < Ni 75 Ru 25 < Ni 50 Ru 50 ~ Ni 25 Ru 75 ~ Ru. Ru-containing catalysts facilitated production of hydrocarbons (hydrodenitrogenation (HDN) products) when used with added formic acid (hydrogen source). We elucidated catalytic hydrothermal HDN pathways for indole based on the product distributions and the variation of their yields with time. Hydrogenation of indole to indoline is the primary pathway and ring-opening of indoline to form alkyl anilines is faster than forming HDN products (alkyl benzenes). DFT calculations confirmed experimental activity trends, showing Ru is more active than Ni for indole ring opening and for o-toluidine deamination. If no hydrogen source is present, directly breaking the N-C bond in the pyrrole ring is more favorable than breaking the C-N bond with an aromatic carbon. If a H source is provided, the pyrrole ring hydrogenates first, forming indoline, followed by cleavage of the C-N bond.
Peptide Control of Electrocatalyst Surface Environment and Catalyst Structure: A Design Platform to Enable Mechanistic Understanding and Synthesis of Active and Selective N2 Reduction Catalysts
Low-temperature electrochemical ammonia synthesis with heterogeneous catalysts suffers from extremely low Faradaic efficiencies (< 1%). The hydrogen evolution reaction (HER) is predicted and experimentally demonstrated to outcompete the nitrogen reduction reaction (N2RR). Meanwhile, the nitrogenase enzymes found in nature enable selective N2RR at Fe/Mo metal centers. Montoya and co-authors suggest that a successful transition metal N2RR catalyst will deviate from or completely circumvent current linear scaling relationships. We propose an approach where short-chain peptides (3-20 amino acids) will be used to control the local surface environment of catalysts. This peptide-based design strategy will be used to overcome HER selectivity and the limitations of *NxHy adsorbate scaling.
Effects of Peptide-Functionalized Surfaces on the Electrochemical Hydrogen Evolution Reaction
Abstract This review outlines the approaches and mechanisms through which peptides and amino acids functionalize electrocatalytically active surfaces to promote or inhibit the electrochemical hydrogen evolution reaction (HER). HER is important in many electrochemical systems. For example, HER is highly desired in water electrolysis, which if driven by renewable energy could serve as a green alternative to the fossil-fuel-driven steam methane-reforming process. However, HER is often an undesired side reaction and thus limits the selectivity of promising electrochemical technologies such as electrochemical nitrogen reduction or carbon dioxide reduction. In pursuing higher product selectivity and yield in emerging and existing electrochemical systems, amino acids and short-chain peptides are promising molecules for the modification of electrochemically active surfaces. Peptides are attractive because they are highly tunable, which allows for versatility in their applications. This short review article summarizes literature that illustrates the mechanisms through which electrode-bound peptides can affect HER including via modulating surface binding and adsorbate coverage, altering the surface composition, and controlling proton transfer rates. Our goal is to motivate additional studies utilizing electrode-bound peptides to modulate electrochemical hydrogen evolution reactions.
Control of Molecular Bonding Strength on Metal Catalysts with Organic Monolayers for CO 2 Reduction
The development of separate levers for controlling the bonding strength of different reactive species on catalyst surfaces is challenging but essential for the design of highly active and selective catalysts. For example, during CO 2 reduction, production of CO often requires balancing a trade-off between the adsorption strength of the reactant and product states: weak binding of CO is desirable from a selectivity perspective, but weak binding of CO 2 leads to low activity. Here in this paper, we demonstrate a new method of controlling both CO 2 adsorption and CO desorption over supported metal catalysts by employing a single self-assembly step where organic monolayer films were deposited on the catalyst support. Binding of phosphonic acid monolayers on supported Pt and Pd catalysts weakened CO binding via a through-support effect. The weakened CO adsorption was generally accompanied by decreased adsorption and reactivity of CO 2 . However, by the incorporation of basic amine functions at controlled positions in the modifying film, strong CO 2 adsorption and hydrogenation reactivity could be restored. Thus, both through-surface and through-space interactions could be manipulated by design of the organic modifiers. After surface modification, the catalysts exhibited significantly improved selectivity (up to ~99% at conversions near 50%) and activity toward CO production. Moreover, the rate of deactivation was notably reduced due to prevention of CO poisoning.