Search NASA⌕ Search

Engineering topics

Janotti, Anderson

Publications and source records attributed to Janotti, Anderson.

At least 55 records · Page 3

Topological phase transition in LaAs under pressure

Using density functional theory (DFT) calculations with the screened hybrid functional of Heyd, Scuseria, and Ernzerhof (HSE06), we study the effects of hydrostatic pressure on the electronic properties of LaAs. We focus on the band crossing near the X point that can make LaAs a topological semimetal, discussing results of both DFT within the generalized gradient approximation (GGA) and the HSE06 hybrid functional. We find that in DFT-GGA, under the calculated equilibrium lattice parameter, LaAs displays a crossing between the highest As p band and the lowest La d band near the X point due to the overestimated p–d band overlap. Such crossing does not occur when the band overlap is corrected in the HSE06 calculation. However, we find that the p–d crossing can be induced in LaAs under hydrostatic pressure, showing a topological phase transition at ~7GPa. Furthermore, the rocksalt crystal structure of LaAs is predicted to be stable under applied pressure up to 20 GPa, in good agreement with experimental observations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A simple electron counting model for half-Heusler surfaces

Heusler compounds are a ripe platform for discovery and manipulation of emergent properties in topological and magnetic heterostructures. In these applications, the surfaces and interfaces are critical to performance; however, little is known about the atomic-scale structure of Heusler surfaces and interfaces or why they reconstruct. Using a combination of molecular beam epitaxy, core-level and angle-resolved photoemission, scanning tunneling microscopy, and density functional theory, we map the phase diagram and determine the atomic and electronic structures for several surface reconstructions of CoTiSb (001), a prototypical semiconducting half-Heusler. At low Sb coverage, the surface is characterized by Sb-Sb dimers and Ti vacancies, while, at high Sb coverage, an adlayer of Sb forms. The driving forces for reconstruction are charge neutrality and minimizing the number of Sb dangling bonds, which form metallic surface states within the bulk bandgap. We develop a simple electron counting model that explains the atomic and electronic structure, as benchmarked against experiments and first-principles calculations. We then apply the model to explain previous experimental observations at other half-Heusler surfaces, including the topological semimetal PtLuSb and the half-metallic ferromagnet NiMnSb. The model provides a simple framework for understanding and predicting the surface structure and properties of these novel quantum materials.

36 MATERIALS SCIENCE↗

Impact of point defects on electrochromism in WO3

Using hybrid density functional theory, we investigate the influence on electronic structure of common defects and impurities in tungsten oxide (WO3). As an easily reducible perovskite with the A-site atom missing, high concentrations of foreign dopants and oxygen deficiencies are possible. Our calculations show that both oxygen vacancies and alkali dopants are shallow donors, and we explore the physical origins for this behavior. In particular, we examine whether oxygen vacancies can give rise to localized states or small polarons. Our results show that in crystalline material no such charge localization occurs. We discuss how these results impact electrical conductivity and optical properties.

Peelaers, Hartwin↗

Hybrid-Functional Calculations of the Copper Impurity in Silicon

We calculate formation energies and transition levels for copper-related defects in silicon using the screened hybrid functional of Heyd, Scuseria, and Ernzerhof HSE06. We consider Cu siting on interstitial sites ( Cu i ), a substitutional site ( Cu Si ), a Cu Si - Cu i pair, a complex formed from substitutional Cu and interstitial hydrogen ( Cu Si - H i ), and a complex formed from a substitutional Cu and three interstitial Cu atoms ( Cu Si - 3 Cu i ). We find that Cu i is a fast diffuser, with a migration barrier of only 0.19 eV, in good agreement with experimental values. Cu i is a shallow donor and its formation energy is lower than that of Cu Si for all Fermi-level positions in the band gap. Cu Si , on the other hand, induces levels in the gap which are related to the occupation of antibonding states originating from the coupling between the Cu 3 d states ( t 2 ( d ) ), resonant in the valence band, and the vacancy-induced gap states ( t 2 ( p ) ). The stable charge states of Cu Si in the gap are + 1 , 0, - 1 , and - 2 . The transition levels of Cu Si - Cu i and Cu Si - H i are closely related to the levels of isolated Cu Si : a donor level ( + / 0 ) near the valence band, an acceptor level near midgap, and a double-acceptor level in the upper part of the gap. Overall, the calculated transition levels are in good agreement with experimental results, and the formation energies explain the observed solubility.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Phase transformations upon doping in WO 3

High levels of doping in WO 3 have been experimentally observed to lead to structural transformation towards higher symmetry phases. In this paper, we explore the structural phase diagram with charge doping through first-principles methods based on hybrid density functional theory, as a function of doping the room-temperature monoclinic phase transitions to the orthorhombic, tetragonal, and finally cubic phase. Finally, based on a decomposition of energies into electronic and strain contributions, we attribute the transformation to a gain in energy resulting from a lowering of the conduction band on an absolute energy scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Small polaron-related recombination in Ba{sub x}Sr{sub 1−x}TiO{sub 3} thin films by cathodoluminescence spectroscopy

Polarons are critical to our understanding of many condensed matter systems, but are difficult to observe and characterize. By combining cathodoluminescence spectroscopy measurements with insights from first-principles calculations, we have identified transitions involving two distinct and simultaneous polaronic states in relaxed Ba{sub x}Sr{sub 1−x}TiO{sub 3} films grown by molecular beam epitaxy. These polaronic optical transitions arise from two discrete Ti-O-Ti bonding configurations simultaneously present in the system, one with a 180° bond angle and the other with buckled geometry due to octahedral tilting. By compositional modulation, we show that we can semi-quantitatively probe the population of each bonding configuration.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Origins of optical absorption and emission lines in AlN

To aid the development of AlN-based optoelectronics, it is essential to identify the defects that cause unwanted light absorption and to minimize their impact. Using hybrid functional calculations, we investigate the role of native defects and their complexes with oxygen, a common impurity in AlN. We find that Al vacancies are the source of the absorption peak at 3.4 eV observed in irradiated samples and of the luminescence signals at 2.78 eV. The absorption peak at ∼4.0 eV and higher, and luminescence signals around 3.2 and 3.6 eV observed in AlN samples with high oxygen concentrations are attributed to complexes of Al vacancies and oxygen impurities. We also propose a transition involving Al and N vacancies and oxygen impurities that may be a cause of the absorption band peaked at 2.9 eV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

First-principles study of vacancy-assisted impurity diffusion in ZnO

Group-III elements act as donors in ZnO when incorporated on the Zn site. Their incorporation and behavior upon annealing is governed by diffusion, which proceeds mainly through a vacancy-assisted process. We report first-principles calculations for the migration of Al, Ga, and In donors in ZnO, based on density functional theory using a hybrid functional. From the calculated migration barriers and formation energies, we determine diffusion activation energies and estimate annealing temperatures. Impurity-vacancy binding energies and migration barriers decrease from Al to In. Activation energies for vacancy-assisted diffusion are lowest for In and highest for Al.

36 MATERIALS SCIENCE↗

Electrically active Er doping in InAs, In{sub 0.53}Ga{sub 0.47}As, and GaAs

The electron concentration in dilute alloys of Er in GaAs, In{sub 0.53}Ga{sub 0.47}As, and InAs grown by molecular beam epitaxy is studied as a function of Er concentration and In content. Using first-principles calculations based on hybrid density functional theory, we attribute an observed increase in conduction electron concentration to Er incorporation on interstitial sites. Er also incorporates on substitutional sites where it is isovalent and electrically inactive. The formation energy of interstitial Er in InAs is significantly smaller than in GaAs, allowing for more electrically active Er in InAs. The results provide insight into characteristics of rare-earth elements as dopants in semiconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrostatic carrier doping of GdTiO{sub 3}/SrTiO{sub 3} interfaces

Heterostructures and superlattices consisting of a prototype Mott insulator, GdTiO{sub 3}, and the band insulator SrTiO{sub 3} are grown by molecular beam epitaxy and show intrinsic electronic reconstruction, approximately 1/2 electron per surface unit cell at each GdTiO{sub 3}/SrTiO{sub 3} interface. The sheet carrier densities in all structures containing more than one unit cell of SrTiO{sub 3} are independent of layer thicknesses and growth sequences, indicating that the mobile carriers are in a high concentration, two-dimensional electron gas bound to the interface. These carrier densities closely meet the electrostatic requirements for compensating the fixed charge at these polar interfaces. Based on the experimental results, insights into interfacial band alignments, charge distribution, and the influence of different electrostatic boundary conditions are obtained.

36 MATERIALS SCIENCE↗