Engineering topics

Jason M Leonard

Publications and source records attributed to Jason M Leonard.

7 records

NASA NTRS2021

Contact with Bennu! Flight Performance Versus Prediction of OSIRIS-REx TAG Sample Collection

The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission collected a sample from the surface of the near-Earth asteroid (101955) Bennu in late 2020. Bennu challenged the team with a surface that was much rockier than expected, resulting in modifications to the prelaunch design of the Touch And Go (TAG) sequence. Following enhancements in onboard trajectory correction, ground-based navigation, and maneuver execution error modeling, the spacecraft was delivered to the chosen TAG site within 1 m of the target, and a sample was successfully collected on the first attempt. This paper provides a comprehensive description of all flight dynamics aspects of TAG trajectory planning and execution. It also describes hazard map generation and how that combined with error analysis results to predict the probability of safe contact before TAG and the onboard wave-off determination during TAG.

Kevin E Berry↗

NASA NTRS2021

OSIRIS-REx Proximity Operations and Navigation Performanceat (101955) Bennu

The NASA Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft began close proximity operations at the small (500-m diameter) B-type asteroid (101955) Bennu in December 2018 and concluded in May 2021. Hundreds of grams of pristine surface regolith were collected on October 20, 2020, when the OSIRIS-REx spacecraft successfully executed the Touch and Go (TAG) sample collection sequence. The spacecraft touched down within 1 meter of the targeted site on the surface of Bennu. TAG was the culmination of over 2 years of navigation performance refinement as a result of extraordinary interagency teamwork between the Flight Dynamics System (FDS), science and spacecraft teams while in close proximity to Bennu. This paper will discuss the navigation processes, planning and performance during the proximity operations at Bennu.

Peter G. Antreasian↗

NASA NTRSDate not supplied

OSIRIS-REx Proximity Operations and Navigation Performance at (101955) Bennu

The NASA Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) spacecraft began close proximity operations at the small (500-mdiameter) B-type asteroid (101955) Bennu in December 2018 and concluded in May 2021.Hundreds of grams of pristine surface regolith were collected on October 20, 2020, when the OSIRIS-REx spacecraft successfully executed the Touch and Go (TAG) sample collection sequence. The spacecraft touched down within 1 meter of the targeted site on the surface of Bennu. TAG was the culmination of over 2 years of navigation performance refinement as a result of extraordinary interagency teamwork between the Flight Dynamics System (FDS),science and spacecraft teams while in close proximity to Bennu. This paper will discuss the navigation processes, planning and performance during the proximity operations at Bennu.

Peter G Antresian↗

NASA NTRSDate not supplied

Osiris-Rex Post-Tag Observation Trajectory Design and Navigation Performance

NASA’s OSIRIS-REx spacecraft successfully collected a sample of asteroid regolith from the surface of near-Earth asteroid Bennu in October of 2020. Subsequent imaging of the sampler head showed material leaking from the collection mechanism, thus stowage of the sample precluded execution of any planned maneuvers in the following days. Optical navigation imaging also ceased in the days following sample collection. The desire to image the sample site to investigate the results of the spacecraft-to-surface interaction led to the Navigation team designing a trajectory to return to Bennu after several months in order to image the surface one final time. After several iterations a trajectory design was created that satisfied the numerous constraints that were levied in order to place utmost importance on the safety of the spacecraft and stowed sample, while also closely emulating previously obtained imaging conditions to provide a close comparison of site pre- and post-contact. Significant analysis was necessary in order to reliably reacquire the asteroid after several months without optical navigation imagery. The final design required five maneuvers to return the spacecraft to Bennu and perform a final flyby of the asteroid at a distance of 3.8 kilometers. Successful execution of the phase provided key insights regarding the performance of the sample collection activities and the subsurface composition of the asteroid.

Daniel R Wibben↗

NASA NTRSDate not supplied

Cross-Calibration of GNC and OLA LIDAR Systems Onboard OSIRIS-REx

The Origins, Spectral Interpretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx) mission carried two distinct light detection and ranging (LIDAR) systems: A scanning LIDAR called OSIRIS-REx Laser Altimeter (OLA) as part of the science payload, and a flash LIDAR system has part of the Guidance, Navigation, & Control (GNC) subsystem to serve as a navigation sensor during TAG. This presents a unique opportunity to compare the performance of the two LIDAR systems in close proximity to a small asteroid body. During the Orbital B mission phase, between June to August 2019, the OSIRIS-REx spacecraft orbited Bennu in a near-circular terminator orbit during which the altitude above the surface varied between 645 m to 740 m. Over five-week period observations were recorded with the OLA instrument that were subsequently used to construct a global digital terrain map (DTM) with a resolution of 5 cm and accuracy of ±20 cm. This model provides an excellent reference for assessing the performance of the GNC LIDAR system. Two different GNC LIDAR checkout activities were also conducted during the Orbital B phase: A limb-crossing check-out featured a series of slews to collect GNC LIDAR data across varying ranges and phase angles and operate the automatic gain control modes of the device; An OLA-GNC LIDAR cross calibration was designed to collect data from both the OLA and GNC LIDAR devices with overlapping footprints while the spacecraft was pointed nadir. This paper compares the on-orbit performance observed during the cross-calibration activity. The OLA-based global DTM and point clouds are used to evaluate the GNC LIDAR not available during previous analysis. The GNC LIDAR measurements were found to be well within accuracy and precision specified for the instrument, but much noisier than the measurements from OLA within this operating regime.

Jason M Leonard↗

NASA NTRSDate not supplied

Comparing Pre-Launch Assumptions to In-Flight Navigation Performance of OSIRIS-REx

The Sample Return Capsule (SRC) onboard the NASA Origins, Spectral Inter-pretation, Resource Identification, and Security–Regolith Explorer (OSIRIS-REx)spacecraft is currently carrying samples of the B-type asteroid Bennu for safe re-turn to Earth at the Utah Test and Training Range on September 24, 2023. These samples were collected during the Touch And Go (TAG) sampling event on October 20, 2020, when the spacecraft contacted the surface for a few seconds at a location less than 1 meter from the target. The unprecedented navigation performance achieved during that event was the culmination of experience gained during two years of cruise and two years of increasingly challenging operation sat Bennu. As we had hoped, the proximity navigation performance at Bennu exceeded pre-launch analysis. This paper will compare the navigation performance through the proximity operation phases to our pre-launch analysis and will quantify how refinements of the small force models governing the spacecraft motion near Bennu considerably improved the down-track state predictions leading up to the successful TAG event. It was evident to the team and to expert peer reviewers during the design phase that exquisite model fidelity and aggressive operational concepts, which challenged and advanced the state of the art for deep space proximity operations, would be required to meet the mission’s objectives. This paper summarizes the superlative achievements of the team in rising to and overcoming these challenges.

Peter G Antresian↗

NASA NTRSDate not supplied

Venus Atmospheric Probe and Flyby Relay Spacecraft Cross-Link Tracking Impact on Relative Pointing Accuracy

Scientific exploration of Venus using an atmospheric probe requires relaying telemetry to Earth as the probe descends through the atmosphere to the surface of Venus. Using the flyby spacecraft to relay the probe telemetry to Earth will require precise carrier-to-probe pointing accuracy of the relay spacecraft’s antenna. NASA’s Deep Atmosphere Venus Investigation of Noble gases, Chemistry, and Imaging (DAVINCI) mission uses this carrier-to-probe relay technique. Although DAVINCI includes a coherent cross-link for science, this is not baselined for navigation tracking. This paper explores the potential effectiveness of cross-link tracking for reducing trajectory uncertainty and improving spacecraft-to-probe pointing.

DAVINCI↗