Engineering topics

Javni, Ivan

Publications and source records attributed to Javni, Ivan.

3 records

DOE OSTI2015

Thermoplastic Polyurethanes with Isosorbide Chain Extender

Isosorbide, a renewable diol derived from starch, was used alone or in combination with butane diol (BD) as the chain extender in two series of thermoplastic polyurethanes (TPU) with 50 and 70% polytetramethylene ether glycol (PTMEG) soft segment concentration (SSC), respectively. In the synthesized TPUs, the hard segment composition was systematically varied in both series following BD/isosorbide molar ratios of 100 : 0; 75 : 25; 50 : 50; 25 : 75, and 0 : 100 to examine in detail the effect of chain extenders on properties of segmented polyurethane elastomers with different morphologies. We found that polyurethanes with 50% SSC were hard elastomers with Shore D hardness of around 50, which is consistent with assumed co-continuous morphology. Polymers with 70% SSC displayed lower Shore A hardness of 74–79 (Shore D around 25) as a result of globular hard domains dispersed in the soft matrix. Insertion of isosorbide increased rigidity, melting point and glass transition temperature of hard segments and tensile strength of elastomers with 50% SSC. These effects were weaker or non-existent in 70% SSC series due to the short hard segments and low content of isosorbide. We also found that the thermal stability was lowered by increasing isosorbide content in both series.

elastomers↗

DOE OSTI2015

Thermoplastic polyurethanes with controlled morphology based on methylenediphenyldiisocyanate/isosorbide/butanediol hard segments: Thermoplastic polyurethanes with controlled morphology

Isosorbide, a cyclic, rigid and renewable diol was used as a chain extender in two series of thermoplastic polyurethanes. Isosorbide was used in combination with butane diol or alone to examine the effects on polyurethane morphology. Two series of materials were prepared -one with dispersed hard domains in the matrix of polytetramethylene ether glycol soft segments of molecular weight 1400 (at 70% soft segment concentration-SSC) and the other with co-continuous soft and hard phases at 50% SSC. Morphology of materials was studied by optical and atomic force microscopy, as well as with ultra small angle x-ray scattering (USAXS). The radius of spherical hard domains, correlation lengths, mean separation distances and boundary layer thickness were measured as a function of isosorbide content.

chain extender↗

DOE OSTI2013

Phase structure in segmented polyurethanes having fatty acid-based soft segments

Abstract: Structural studies on two segmented polyurethanes prepared form the modified oleic acid soft segments and butane diol/diphenylmethane diisocyanate hard segments, were carried out. Polyurethanes were thermoplastic elastomers with soft segment concentration (SSC) of 50% (TPU-50) and 70% (TPU-70). Dynamic mechanical analysis revealed the co-continuous morphology in TPU-50 and dispersed hard domains in the soft matrix in TPU-70. AFM revealed the micron size globules in TPU-70 ascribed to hard segment-rich spherulites and alternating small soft and hard domains in TPU- 50, with lateral dimensions of about 15 nm with local modulus deviations from 40 to 50 MPa, consistent with co-continuous morphology. The dispersed hard domains in the soft matrix for TPU-70, and co-continuous phases in TPU-50 morphology was confirmed. USAXS showed the domain spacing for TPU-50 was about 13.3 nm and about 11.3 nm for TPU-70. USAXS revealed that the interface between phase-separated domains exhibit a surface-fractal-like behavior.

fatty acid↗