Search NASA⌕ Search

Engineering topics

Jayaweera, Palitha

Publications and source records attributed to Jayaweera, Palitha.

Mixed-Salt Based Transformational Solvent Technology for CO 2 Capture

SRI International developed a novel, water-lean, mixed-salt-based transformational solvent technology under a U.S. Department of Energy (DOE)/National Energy Technology Laboratory (NETL)-funded project. This advanced mixed-salt process (A-MSP) can be operated with high cyclic CO 2 loading, and the solution can be regenerated with greater than 10 bar CO 2 pressure at temperatures less than 120°C. The team has created a process model and performed a techno-economic evaluation (TEA) to identify development pathways for technology advancement. The A-MSP will provide a reduction in the CO 2 capture cost and energy penalties and will have the potential for accelerated scale-up to meet the DOE’s new target of <30/tonne-CO 2 by 2030 for coal-fired power plant applications.

01 COAL, LIGNITE, AND PEAT↗

Development of a Pre-Combustion CO 2 Capture Process Using High-Temperature PBI Hollow-Fiber Membranes

The overall objective of this project was to evaluate the advantages of transformational polybenzimidazole (PBI) polymer hollow-fiber membrane (HFM)-based, carbon dioxide (CO 2 ) capture and purification technology at bench-scale using an actual coal-derived syngas stream from a coal gasification facility. The project was carried out over two budget periods. The technical objectives in Budget Period 1 (BP1) included preparing HFs and modules and upgrading the available skid for field testing. The technical objectives for BP2 were to field-test the skid unit with actual coal-derived syngas from an oxygen-blown gasifier to obtain performance data, update the Techno-Economic Analysis (TEA) that would assist with future process scale-up, and provide information on the design of a small pilot-scale test unit. The goal was to advance the PBI-HFM CO 2 capture and gas separation system for pre-combustion applications beyond second-generation economic performance predictions and make progress toward meeting overall fossil energy performance goals of CO 2 capture with 95% CO 2 purity at a cost of electricity (COE) 30% less than baseline capture approaches. The research program was designed with progressive technical tasks leading to both dynamic and steady-state testing of the PBI-HFM skid with actual coal-derived syngas. The work plan was to: (1) fabricate sufficient Generation-2 (GEN-2) fibers for module fabrication; (2) upgrade the fiber skid to accommodate large fiber modules for bench-scale field testing; (3) conduct dynamic and steady-state testing with coal-derived syngas from an oxygen-blown gasifier and obtain system performance data; (4) perform a TEA and environmental, health, and safety (EH&S) assessment; (5) update the State-Point Data Table, Technology Gap Analysis (TGA), and Technology Maturation Plan (TMP); (6) uninstall and return the test skid to the Recipient’s facilities; and (7) submit a Final Report that describes the results and analysis of the project research effort.

03 NATURAL GAS↗

Flue Gas Desulfurization (FGD) Wastewater Treatment Using Polybenzimidazole (PBI) Hollow Fiber (HF) Membranes

Polybenzimidazole (PBI) hollow fiber membranes were used to treat flue gas desulfurization (FGD) wastewater (WW) from a coal fired power plant. Membranes were tested using both single salt solutions and real FGD WW. The PBI membranes showed >99% rejection for single salt solutions of NaCl, MgCl2, CaSO4, and CaCl2 at approximately 2000 PPM (parts per million). The membranes also showed >97% rejection for FGD WW concentrations ranging from 6900 to 14,400 PPM total dissolved solids (TDS). The pH of the FGD WW was adjusted between 3.97–8.20, and there was an optimal pH between 5.31 and 7.80 where %rejection reached a maximum of >99%. The membranes were able to operate stably up to 50 °C, nearly doubling the water flux as compared to room temperature, and while maintaining >98% salt rejection.

activation energy↗

Development of a Pre-combustion CO 2 Capture Process Using High-Temperature PBI Hollow-Fiber Membranes

The overall goal of this research project was to develop a high-temperature, membrane-based CO 2 capture technology for coal gasification facilities and make progress toward meeting overall fossil energy performance goals of CO 2 capture with 95% CO 2 purity at a cost of electricity (COE) 30% less than baseline capture approaches. The primary objectives of the project were to evaluate, at a bench-scale size, a technically and economically viable CO 2 capture system based on a high-temperature polybenzimidazole (PBI) polymer hollow-fiber membrane (HFM) separation system, and to optimize the process for integration of that system into an integrated gasification combined cycle (IGCC) plant. The specific objectives of the proposed project are to: (1) fabricate high-performance PBI-HFMs for H 2 /CO 2 separation; (2) collect laboratory data for separating hydrogen from simulated synthesis gas using PBI-based membrane modules; (3) transfer the membrane fabrication technology to an industrial firm that specializes in the manufacture of HFMs; (4) fabricate membrane modules to process a syngas stream (50 kWth) equivalent to that of shifted gas from an oxygen-blown gasifier; (5) obtain design and steadystate performance data for membrane modules using syngas from an operating coal gasifier; (6) estimate the cost of CO 2 capture from pre-combustion gas streams integrated into a 550-MW (net) power plant; and (7) conduct a process environmental health & safety (EH&S) assessment.

01 COAL, LIGNITE, AND PEAT↗

Development of Mixed-Salt Technology for CO 2 Capture from Coal Power Plants (Final Report)

SRI International (SRI), in collaboration with Stanford University, OLI Systems (OLI), Politecnico de Milano (PoliMi), and Aqueous Systems Aps (ASApS) performed a 45-month effort to develop a promising Mixed-Salt Process (MSP) for carbon dioxide capture. The MSP combines existing ammonia and potassium-carbonate technologies with improved absorption steps for rate enhancement and ammonia emission reduction and a novel selective regeneration process with a high-pressure CO 2 product to introduce a new and advanced transformational solvent-based technology. The striking advantages of the SRI MSP include: low heat of reaction, high loading of CO 2 , high-pressure regeneration of > 99% pure dry CO 2 , low sensitivity to impurities, low process cost, use of a non-degradable low-cost solvent with a very low carbon footprint for its production, low emissions, and reduced water use compared to the state-of-the-art ammonia-based and amine technologies. The overall objective of the project was to develop and test a solvent-based CO 2 capture technology that can capture CO 2 from existing or new pulverized coal (PC) power plants at low cost. Our specific goal was to test SRI’s newly developed MSP at the large bench-scale level to demonstrate that the process could capture CO 2 at high efficiency (> 90%) with very high CO 2 loading (> 10 wt.%), require less than 2 GJ/tonne for solvent regeneration, and produce a CO2 stream at high pressure with a purity > 95 vol.%. This 45-month MSP development program was designed to conduct (1) extensive test campaigns with different process flowsheet variants, and (2) detailed thermodynamic, kinetic, and process modeling. These tests and models were very important to identify any issues associated with the process in the early stages and then resolve them before moving into the next scale-up (> 1 MWe scale) testing. Such an approach reduces the risks associated with the process operability at large scales and provides capital and operating expenditure (CAPEX/OPEX) predictions with improved accuracies. Under the MSP development program at SRI, we performed an aggressive testing campaign with individual subsystems as well as integrated CO 2 capture and regeneration system to identify the best operating conditions. The project was carried out in two budget periods (BP1 & BP2).

20 FOSSIL-FUELED POWER PLANTS↗

Process for fabricating PBI hollow fiber asymmetric membranes for gas separation and liquid separation

The invention provides methods for preparing an asymmetric hollow fiber, the asymmetric hollow fibers prepared by such methods, and uses of the asymmetric hollow fibers. One method involves passing a polymeric solution through an outer annular orifice of a tube-in-orifice spinneret, passing a bore fluid though an inner tube of the spinneret, dropping the polymeric solution and bore fluid through an atmosphere over a dropping distance, and quenching the polymeric solution and bore fluid in a bath to form an asymmetric hollow fiber.

36 MATERIALS SCIENCE↗