Search NASA⌕ Search

Engineering topics

Jean-Paul Vernier

Publications and source records attributed to Jean-Paul Vernier.

At least 19 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

Three-Wavelength Approach for Aerosol-Cloud Discrimination in the Sage III/ISS Aerosol Extinction Dataset

The tropical upper troposphere and lower stratosphere (UTLS) region is dominated by aerosols and clouds affecting Earth’s radiation budget and climate. Thus, satellites’ continuous monitoring and identification of these layers is crucial for quantifying their radiative impact. However, distinguishing between aerosols and clouds is challenging, especially under the perturbed UTLS conditions during post-volcanic eruptions and wildfire events. Aerosol-cloud discrimination is primarily based on their disparate wavelength-dependent scattering and absorption properties. In this study, we use aerosol extinction observations in the tropical (15°N-15°S) UTLS from June 2017 to February 2021, available from the latest generation of the Stratospheric Aerosol and Gas Experiment (SAGE) instrument-SAGE III onboard the International Space Station (ISS) to study aerosols and clouds. During this period, the SAGE III/ISS provided better coverage over the tropics at additional wavelength channels (relative to previous SAGE missions) and witnessed several volcanic and wildfire events that perturbed the tropical UTLS. We explore the advantage of having an extinction coefficient at an additional wavelength channel (1550 nm) from the SAGE III/ISS in aerosol-cloud discrimination using a method based on thresholds of two extinction coefficient ratios, R1R1 (520 nm/1020 nm) and R2R2 (1020 nm/1550 nm). This method was proposed earlier by Kent et al. [Appl. Opt. 36, 8639 (1997) [CrossRef] ] for the SAGE III-Meteor-3M but was never tested for the tropical region under volcanically perturbed conditions. We call this method the Extinction Color Ratio (ECR) method. The ECR method is applied to the SAGE III/ISS aerosol extinction data to obtain cloud-filtered aerosol extinction coefficients, cloud-top altitude, and seasonal cloud occurrence frequency during the entire study period. Cloud-filtered aerosol extinction coefficient obtained using the ECR method revealed the presence of enhanced aerosols in the UTLS following volcanic eruptions and wildfire events consistent with the Ozone Mapping and Profiler Suite (OMPS) and space-borne lidar-Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP). The cloud-top altitude obtained from the SAGE III/ISS is within 1 km of the nearly co-located observations from OMPS and CALIOP. In general, the seasonal mean cloud-top altitude from the SAGE III/ISS events peaks during the December, January, and February months, with sunset events showing higher cloud tops than the sunrise events, indicating the seasonal and diurnal variation of the tropical convection. The seasonal altitude distribution of cloud occurrence frequency obtained from the SAGE III/ISS also agrees well with CALIOP observations within 10%. We show that the ECR method is a simple approach that relies on thresholds independent of the sampling period, providing cloud-filtered aerosol extinction coefficients uniformly for climate studies irrespective of the UTLS conditions. However, since the predecessor of SAGE III did not include a 1550 nm channel, the usefulness of this approach is limited to short-term climate studies after 2017.

Clouds Aerosols↗
NASA NTRS2023

The Calipso Version 4.5 Stratospheric Aerosol Subtyping Algorithm

The accurate classification of aerosol types injected into the stratosphere is important to properly characterize their chemical and radiative impacts within the Earth climate system. The updated stratospheric aerosol subtyping algorithm used in the version 4.5 (V4.5) release of the Cloud Aerosol Lidar with Orthogonal Polarization (CALIOP) level 2 data products now delivers more comprehensive and accurate classifications than its predecessor. The original algorithm identified four aerosol subtypes for layers detected above the tropopause: volcanic ash, smoke, sulfate/other, and polar stratospheric aerosol (PSA). In the revised algorithm, sulfates are separately identified as a distinct, homogeneous subtype, and the diffuse, weakly scattering layers previously assigned to the sulfate/other class are recategorized as a fifth “unclassified” subtype. By making two structural changes to the algorithm and revising two thresholds, the V4.5 algorithm improves the ability to discriminate between volcanic ash and smoke from pyrocumulonimbus injections, improves the fidelity of the sulfate subtype, and more accurately reflects the uncertainties inherent in the classification process. The 532 nm lidar ratio for volcanic ash was also revised to a value more consistent with the current state of knowledge. This paper briefly reviews the previous version of the algorithm (V4.1 and V4.2) then fully details the rationale and impact of the V4.5 changes on subtype classification frequency for specific events where the dominant aerosol type is known based on the literature. Classification accuracy is best for volcanic ash due to its characteristically high depolarization ratio. Smoke layers in the stratosphere are also classified with reasonable accuracy, though during the daytime a substantial fraction are misclassified as ash. It is also possible for mixtures of ash and sulfate to be misclassified as smoke. The V4.5 sulfate subtype accuracy is less than that for ash or smoke, with sulfates being misclassified as smoke about one-third of the time. However, because exceptionally tenuous layers are now assigned to the unclassified subtype and the revised algorithm levies more stringent criteria for identifying an aerosol as sulfate, it is more likely that layers labeled as this subtype are in fact sulfate compared to those assigned the sulfate/other classification in the previous data release.

Jason L Tackett↗
NASA NTRS2019

TPSAS-NF1676L-35280-DND

The stratosphere matters for climate. After large volcanic eruptions, long-lasting aerosol layers provide a temporary veil that reduces solar radiation and cools the entire planet. Scientists have now discovered that, not only volcanoes , but also pollution from Asia can reach the stratosphere. NASA and ISRO space agencies have team up to study human-induced particulate footprints in the stratosphere with satellite and balloon observations.

Jean-Paul Vernier↗
NASA NTRS2018

CALIPSO Lidar Calibration at 532 nm: Version 4 Nighttime Algorithm

Data products from the Cloud-Aerosol Lidar with Orthogonal Polarization (CALIOP) on board Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) were recently updated following the implementation of new (version 4) calibration algorithms for all of the level 1 attenuated backscatter measurements. In this work we present the motivation for and the implementation of the version 4 nighttime 532 nm parallel channel calibration. The nighttime 532 nm calibration is the most fundamental calibration of CALIOP data, since all of CALIOP’s other radiometric calibration procedures – i.e., the 532 nm daytime calibration and the 1064 nm calibrations during both nighttime and daytime – depend either directly or indirectly on the 532 nm nighttime calibration. The accuracy of the 532 nm nighttime calibration has been significantly improved by raising the molecular normalization altitude from 30-34 km to 36-39 km to substantially reduce stratospheric aerosol contamination. Due to the greatly reduced molecular number density and consequently reduced signal-to-noise ratio (SNR) at these higher altitudes, the signal is now averaged over a larger number of samples using data from multiple adjacent granules. As well, an enhanced strategy for filtering the radiation-induced noise from high energy particles was adopted. Further, the meteorological model used in the earlier versions has been replaced by the improved MERRA-2 model. An aerosol scattering ratio of 1.01 ± 0.01 is now explicitly used for the calibration altitude. These modifications lead to globally revised calibration coefficients which are, on average, 2-3% lower than in previous data releases. Further, the new calibration procedure is shown to eliminate biases at high altitudes that were present in earlier versions and consequently leads to an improved representation of stratospheric aerosols. Validation results using airborne lidar measurements are also presented. Biases relative to collocated measurements acquired by the Langley Research Center (LaRC) airborne high spectral resolution lidar (HSRL) are reduced from 3.6% ± 2.2% in the version 3 data set to 1.6% ± 2.4 % in the version 4 release.

Jayanta Kar↗
NASA NTRSDate not supplied

TPSAS-NF1676L-33993-DND

Large volcanic eruptions are the primary sources of aerosols in the stratosphere and play an important role in the global climate system. The transformation of sulfur dioxide emitted by volcanoes into sulfuric acid droplets leads to a global cooling effect at the surface by enhanced reflection of solar radiation to space and reduced the earth's radiative budget for months to years. In June 2019, the Raikoke volcano, Kuril Islands (153.24167 E, 48.29167 N) emitted 1.4 Tg of SO2 between June 21st and 22nd with plume injection height between 7 and 15 km based on several ultra-violet and infrared sensors as well as the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) space-based lidar. CALIPSO and the NASA Langley Trajectory Model (LaTM) with GEOS5 meteorological data are used to track dispersed volcanic ash plumes. The trajectory mapping technique will be used to re-construct the 3-dimension structure of volcanic ash and sulfate. Results will be compared with independent observations from the Stratospheric Aerosol and Gas Experiment and GEOS-Chem model outputs to understand the transport of the plume into the stratosphere and its lifetime.

Hyundeok Choi↗
NASA NTRSDate not supplied

TPSAS-NF1676L-31460-DND

Summary - An upward shift of cirrus clouds at a rate higher than that predicted by the climate models is observed in the last 16 years. - Only sub-visible cirrus clouds exhibited upward shift in their altitude. - Optical thickness of sub-visible and thick cirrus clouds showed decreasing trends. - No significant trend was obtained from the CALIOP data over Gadanki. - SAGE-II data show increasing trend in the occurrence frequency of aerosol and decreasing trend in aerosol-cloud mixture - CALIOP observations show increase in cirrus cloud occurrence in Western-equatorial pacific.

Amit Kumar Pandit↗
NASA NTRSDate not supplied

Assessing the Radiative Impact of the 2019 – 2020 Australian Bushfires using Trajectory-Mapped CALIPSO Observations.

During the 2019/2020 fire season, Australian bushfires burned 46 million acres, killed 39 people and billions of animals, and became the costlier fire season in Australian history. Between the end of December and early January, a series of pyrocumulonimbus injected thick smoke layers in the upper troposphere and lower stratosphere which were observed over the Tasmanian Sea and New Zealand by the Ozone Mapping and Profiler Suite (OMPS) and the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO). The smoke plume crossed the tropopause and was further dispersed across the Eastern Pacific Ocean rising up to 30 km height after two weeks. . In this study, we use CALIPSO and the NASA Langley Trajectory Model (LaTM), driven by Modern-Era Retrospective analysis for Research and Application, Version 2 (MERRA-2) meteorological data, to track the dispersion of Australian fire smoke plumes in both the troposphere and the stratosphere. Trajectory mapping is used to re-construct the 3-dimension structure of the smoke plumes. Results are compared with independent observations from the Stratospheric Aerosol and Gas Experiment (SAGE) III on the International Space Station (ISS) to understand the complex transport of the plume into the stratosphere and its lifetime. Using trajectory maps, the impact of the Australian bushfires on the Earth’s radiative energy budget is assessed with the Clouds and the Earth’s Radiant Energy System (CERES).

Australian Bushfires↗
NASA NTRSDate not supplied

Formation of Tropopause Cirrus clouds by Typhoon-induced gravity waves during the Asian Summer Monsoon: A Case Study from the BATAL 2017 Campaign

Cirrus clouds in the Tropical Tropopause Layer (TTL) have a net warming impact on Earth’s climate and they regulate the amount of water vapor entering the lower stratosphere through dehydration process near the cold-point tropopause. During the Boreal summer, Asian Summer Monsoon (ASM) is an important source of cirrus clouds and humidity in the TTL owing to frequent deep convection. However, better representation of convection and TTL cirrus clouds in global climate models is needed for accurate assessment of their response to changing climate. In this study, we investigate the mechanisms involved in the formation of a tropopause cirrus cloud layer observed during the Balloon measurement campaigns of the Asian Tropopause Aerosol Layer (BATAL) over Hyderabad (17.47 °N, 78.58 °E), India on 23 August 2017. A subvisible cirrus cloud layer (optical thickness ~0.025) was detected by a backscatter sonde (COBALD) onboard a balloon near the cold-point tropopause (CPT, temperature~ -86.4 ° C, altitude~17.9 km) which was later confirmed by the CATS lidar on the ISS. Simultaneous measurements from an optical particle counter (Boulder Counter) revealed the presence of ice crystals smaller than 50 microns in this layer. The formation mechanism responsible for this tropopause cirrus is investigated using a technique combining three-dimensional back-trajectories, satellite observations, and ERA5 reanalysis data. Satellite observations revealed that the overshooting convection associated with a category-3 typhoon Hato, which hit Macau and Hong Kong on 23 August 2017 injected ice into the lower stratosphere. This caused a hydration patch that followed the ASM anticyclone subsequently moving towards Hyderabad. The presence of tropopause cirrus cloud layers in the cold temperature anomalies and updrafts along the back-trajectories indicated towards the role of typhoon-induced gravity waves in their formation. This case study highlights the role of typhoons in influencing the formation of tropopause cirrus clouds through stratospheric hydration and gravity waves in the ASM anticyclone.

Amit Kumar Pandit↗