Engineering topics

Jefferys, W. H.

Publications and source records attributed to Jefferys, W. H..

At least 19 records

NASA NTRS2006

The Optical Field Angle Distortion Calibration of HST Fine Guidance Sensors 1R and 3

To date five OFAD (Optical Field Angle Distortion) calibrations have been performed with a star field in M35, four on FGS3 and one on FGS1, all analyzed by the Astrometry Science Team. We have recently completed an improved FGS1R OFAD calibration. The ongoing Long Term Stability Tests have also been analyzed and incorporated into these calibrations, which are time-dependent due to on-orbit changes in the FGS. Descriptions of these tests and the results of our OFAD modeling are given. Because all OFAD calibrations use the same star field, we calibrate FGS 1 and FGS 3 simultaneously. This increases the precision of our input catalog,resulting in an improvement in both the FGS 1 and FGS 3 calibrations. A redetermination of the proper motions,using 12 years of HST data has significantly improved our calibration. Residuals to our OFAD modeling indicate that FGS 1 will provide astrometry superior to FGS 3 by approx. 20%. Past and future FGS astrometric science supported by these calibrations is briefly reviewed.

McArthur, B.↗

NASA NTRS1997

Maintaining the FGS3 optical field angle distortion calibration

To date four OFAD (Optical Field Angle Distortion) calibrations have been performed on FGS3 in M35 and analyzed by the Astrometry Science Team. Two have been performed since the last HST (Hubble Space Telescope) Calibration Workshop. The ongoing Long Term Stability Tests have also been analyzed and incorporated into the calibration. A lateral color calibration has been derived from calibration and science data. Descriptions of these tests and the results of our analysis of the resulting data are given. The astrometric science supported by these calibrations is briefly reviewed.

McArthur, B.↗

NASA NTRS1994

Astrometry with Hubble Space Telescope Fine Guidance Sensor number 3: Position-mode stability and precision

We report results from a test exploring the long- and short-term astrometric stability of Hubble Space Telescope Fine Guidance Sensor (FGS) #3. A test field was observed 40 times over 522 days to determine the precision and accuracy of FGS astrometry and to measure the character and magnitude of possible secular scale changes. We examine the astrometric data and the associated guide-star data to determine random errors. These data are also explored to find sources of systematic error. After correcting for some systematic effects we obtain a precision of 0.002 arcsec (2 mas) per observation (RSS of x and y). This is relative astrometry within a central 2.5 arcmin FGS field of view for any orientation. We find that the scale varies over time and confirm the sense of the trend with independent data. From the 40 observation sets we produce a catalog of an astrometry test field containing eight stars whose relative positions are known to an average 0.7 and 0.9 mas in x and y. One reference star has a relative parallax of 3.1 plus or minus 0.5 mas. Finally, we report that eleven observation sets acquired over 387 days produce parallaxes and relative positions with 1-mas precision.

Benedict, G. F.↗

NASA NTRS1993

Periodic low-amplitude variations in the brightness of Proxima Centauri

Using data acquired with Fine Guidance Sensor No. 3 on board the Hubble Space Telescope we find that the brightness of Proxima Centauri varies with an amplitude of 0.01 mag and a period P = 41.6 +/- 0.6 days. We interpret this variation as rotational modulation of star spots or bright regions in the photosphere of Proxima Cen. In a total of 89.36 min of monitoring over 212 days, we detected one major flare and three post-flare brightenings.

Benedict, G. F.↗

NASA NTRS1993

NGC 4314. II - Hubble Space Telescope I-band surface photometry of the nuclear region

We present an HST I-band Planetary Camera image of the nuclear region of NGC 4314, an anemic barred galaxy with recent star formation confined to a nuclear ring. These data resolve the nuclear ring into multiple sites of new star formation and resolve associated dust lanes into discrete clouds. Deconvolution results in at least 0.13 arcsec resolution, as demonstrated by the de Vaucouleurs r exp 1/4 law. Contrasted with similar studies of M87 and NGC 7457, we find no photometric evidence for an extreme concentration of stars in the center of NGC 4314. We identify an oval distortion of length 8 arcsec in the nuclear region, using ellipse-fitting routines and the unsharp masked frame. This nuclear bar has newer stars near its ends. We catalog 14 star clusters associated with H II regions in the nuclear ring. As an additional demonstration of the resolution achieved, the integral size distribution of these clusters is described by an exponential relationship which prevails down to 0.14 arcsec.

Benedict, G. F.↗

NASA NTRS1992

Astrometric performance characteristics of the Hubble Space Telescope fine guidance sensors

Each of the three fine guidance sensors for the Hubble Space Telescope constitutes a sixth science instrument to be used for astrometry. We detail the tests and results used in choosing one of the three sensors to be the prime astrometer. The Astrometry Science Team has chosen Fine Guidance Sensor (FGS) 3. FGS 3 produces position measurements on a star with V = 17 with a peraxis precision of 0.003 arcsec. The interferometer response function should permit double-star astrometry at least down to V = 16 for the central region of FGS 3. In a 10-h test of the stability of POS-mode astrometric measurements made in FGS 3, we found no scale or orientation variations greater than two parts in 100,000. During this same time period, we found no statistically significant systematic guide-star radial separation changes. Spacecraft jitter is found to be the prime determinant of astrometry success or failure.

Benedict, G. F.↗

NASA NTRS1991

Hubble Space Telescope: A cosmic time machine

The mission of the Hubble Space Telescope (HST) is to explore the expanding and evolving universe. During the 3,000 operating hours every year for the next 15 years or more, the HST will be used to study: galaxies; pulsars; globular clusters; neighboring stars where planets may be forming; binary star systems; condensing gas clouds and their chemical composition; and the rings of Saturn and the swirling ultraviolet clouds of Venus. The major technical achievements - its nearly perfect mirrors, its precise guidance system of rate gyroscopes, reaction wheels, star trackers, and fine guidance sensors are briefly discussed. The scientific instruments on board HST are briefly described. The integration of the equipment and instruments is outlined. The Space Telescope Science Institute (STScI) has approved time for 162 observations from among 556 proposals. The mission operation and data flow are explained.

Westphal, J. A.↗

NASA NTRS1991

Astrometry using the Hubble Space Telescope fine guidance sensors

Plans for the use of the three fine guidance sensors (FGSs) of the NASA Hubble Space Telescope for direct astrometric observations are reviewed. Topics addressed include the optical elements and detectors of the FGSs, the basic and astrometric operating modes of the FGSs, spacecraft pointing control during astrometric observations, and the astrometric data-reduction software provided to HST users. Particular attention is given to the calibration procedures for optical-field angle distortion, the plate scale, filter-wedge errors, lateral color effects, secular changes, velocity aberration, and transfer function. Also discussed are the steps being taken to verify the HST orbit. It is pointed out that the performance of the interferometric FGSs should not be affected by the focusing problems of the main HST instrument.

Duncombe, Raynor L.↗

NASA NTRS1988

GaussFit - A system for least squares and robust estimation

GaussFit is a new computer program for solving least-squares and robust estimation problems. It has a number of unique features, including a complete programming language designed especially to formulate estimation problems, a built-in compiler and interpreter to support the programming language, and a built-in algebraic manipulator for calculating the required partial derivatives analytically. These features make GaussFit very easy to use, so that even complex problems can be set up and solved with minimal effort. GaussFit can correctly handle many cases of practical interest: nonlinear models, exact constraints, correlated observations, and models where the equations of condition contain more than one observed quantity. An experimental robust estimation capability is built into GaussFit so that data sets contaminated by outliers can be handled simply and efficiently.

Jefferys, W. H.↗

NASA NTRS1985

Prospects for astrometry with the Hubble Space Telescope

The Hubble Space Telescope (HST), a large optical telescope having an aperture of 2.4 meters and a length of 8.8 meters, is being developed by NASA. This telescope will be placed into earth orbit by the Space Shuttle. Astrometric observations with the HST are made using a Fine Guidance Sensor which is capable of measuring the position of one object relative to another with an accuracy of + or - 0.002 arcseconds. The astrometric user of HST will be provided with an Astrometric Data Reduction Software package. The variety of astrometric problems to be investigated with HST is discussed.

Jefferys, W. H.↗

NASA NTRS1985

Using Space Telescope to tie the HIPPARCOS and extragalactic reference frames together

Hubble Space Telescope observations will be made to tie the HIPPARCOS Instrumental System (HIS) to extragalactic objects, to determine the overall rotation of the HIS with respect to a set of extragalactic objects; to compare the HIS to an accurate radio reference frame; and to look for motions in the optical centroids of compact extragalactic objects at the level of 0.001 arcseconds per year. About 75 radio sources and extragalactic objects will be chosen from the initial group of 414 pairs. The egos will have their positions and proper motions determined relative to the HIPPARCOS Input Catalog stars. The candidate stars are being screened by ground based speckle interferometry to select a final set.

Hemenway, P. D.↗

NASA NTRS1981

On the method of least squares. II

A least squares method proposed previously for solving a general class of problems is expanded in two ways. First, covariance matrices related to the solution are calculated and their interpretation is given. Second, improved methods of solving the normal equations related to those of Marquardt (1963) and Fletcher and Powell (1963) are developed for this approach. These methods may converge in cases where Newton's method diverges or converges slowly.

Jefferys, W. H.↗

NASA NTRS1980

Astrometry with the Space Telescope

The Space Telescope offers astronomers for the first time an opportunity to do precision astrometry from space. In this paper, the Space Telescope is described, along with its initial complement of instruments. Particular attention is paid to the Fine Guidance Sensors, which will be the principal astrometric instrument. The responsibilities of the Space Telescope Astrometry Team towards the Space Telescope Astrometry project are described. A description of the scientific results to be expected from Space Telescope astrometry is given. The impact of other proposed Space Astrometry projects, such as the European Astrometry Satellite, on Space Telescope Astrometry is also discussed.

Jefferys, W. H.↗

NASA NTRS1980

On the method of least squares

A method for fitting models to observed data by least squares when the data appear nonlinearly in the equations of condition, where there are nonlinear constraints among model parameters, and where the observations may be correlated, is described. The method is independent of the form in which the equations of condition are expressed, and is a generalization of the classical technique. The method is nearly as simple to apply in practice as the classical method of least squares.

Jefferys, W. H.↗

NASA NTRS1980

The U.S. Space Telescope - Astrometric capabilities

This paper describes the Space Telescope and the instruments it will carry which will be used for astrometry. Particular attention is paid to the two imaging cameras and to the Fine Guidance Sensors. A brief outline of the kinds of programs which are to be carried out is also given.

Jefferys, W. H.↗

NASA NTRS1979

On the overlapping plate method in astrometry

A method is proposed for the simplification of the algorithms of Eichhorn and Russell (1976) for obtaining the solutions of astrometric problems using the overlapping plate method. The method provides the parameter vector (consisting of 'star constants' and plate constants) as well as the covariance matrix of the parameters. A considerable reduction in the amount of matrix algebra required is obtained with the present method.

Jefferys, W. H.↗

NASA NTRS1979

Orbital theories of outer planet satellites

An analytical theory of Mimas and Tethys was developed, retaining terms which produce perturbations of the order of + or - 10 km. The theory uses a novel set of variables, and was developed with the Hori-Lie algorithm, using the algebraic manipulation language TRIGMAN. the perturbations were implemented by means of FORTRAN subroutines produced by the computer.

Jefferys, W. H.↗

NASA NTRS1979

Theories of resonant satellite pairs in Saturn's system

Analytical theories have been devised for the three resonant pairs in Saturn's satellite system: Enceladus-Dione, Titan-Hyperion, and Mimas-Tethys. An algebraic manipulation language was adopted to calculate the theories; use of the canonically invariant Hori-Lie (1966) theory in noncanonical variables made it possible to perform direct computations of perturbations in such quantities as longitude, latitude and radius vector. Important terms at the 1-100 km level have been found second-order terms of the resonant satellite are calculated.

Jefferys, W. H.↗