Search NASA⌕ Search

Engineering topics

Jeffrey Piepmeier

Publications and source records attributed to Jeffrey Piepmeier.

18 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2026

The Hyperspectral Microwave Photonic Instrument (HyMPI) and its NEDT Performance

This work presents an overview of a hyperspectral microwave-photonic spectrometer and demonstrates the system end-to-end noise equivalent delta temperature (NEDT) performance. The system aims at augmenting the remote sensing capability from space, with a focus on the Earth’s planetary boundary layer (PBL) thermal microwave (MW) spectral region (0-200 GHz). Combining a Photonic Integrated Circuit (PIC) channelizer and an application-specific integrated circuit (ASIC) spectrometer, the PIC & ASIC (PICASIC) module is capable of processing 40 GHz spectra at hyperspectral (4 MHz) resolution. The photonic technology is agnostic to the spectral region and multiple photonic modules can cover the entire 200 GHz spectrum. Measured results of the end-to-end system NEDT agree with predicted values confirming that the NEDT is primarily dominated by the noise figure of the MW front-end, with the optical link adding no significant noise. The data also demonstrate that a single module enables simultaneous super- and hyper-spectral resolution channel analysis across a 40 GHz range.

spectrometer↗
NASA NTRS2022

The Hyperspectral Microwave Photonic Instrument (HyMPI) -Advancing Our Understanding of the Earth’s Planetary Boundary Layer From Space

This paper presents an overview of the Hyperspectral Microwave Photonic Instrument (HyMPI), a 2021 NASA Instrument Incubation Proposal funded project aimed at developing the very first hyperspectral microwave sensor to augment thermodynamic sounding capability from space, with a focus on the Earth’s Planetary Boundary Layer. This research responds to the recommendation expressed in the 2018 National Academies of Sciences decadal survey to accelerate the readiness of high-priority PBL observables not feasible for cost-effective spaceflight in 2017-2027. This paper provides an overview on HyMPI’s design, configured as the objective instrument concept needed to fly in the future PBL mission and presents preliminary trade studies aim at demonstrating HyMPI’s enhanced thermodynamic sounding skill in the Earth’s Planetary Boundary Layer over conventional microwave sounders from the current Program of Record.

hyperspectral microwave↗
NASA NTRS2022

The Hyperspectral Microwave Photonic Instrument (HyMPI) - Advancing Our Understanding of the Earth’s Planetary Boundary Layer from Space

This paper presents an overview of the Hyperspectral Microwave Photonic Instrument (HyMPI), a 2021 NASA Instrument Incubation Proposal funded project aimed at developing the very first hyperspectral microwave sensor to augment thermodynamic sounding capability from space, with a focus on the Earth’s Planetary Boundary Layer. This research responds to the recommendation expressed in the 2018 National Academies of Sciences decadal survey to accelerate the readiness of high-priority PBL observables not feasible for cost-effective spaceflight in 2017-2027. This paper provides an overview on HyMPI’s design, configured as the objective instrument concept needed to fly in the future PBL mission and presents preliminary trade studies aim at demonstrating HyMPI’s enhanced thermodynamic sounding skill in the Earth’s Planetary Boundary Layer over conventional microwave sounders from the current Program of Record.

Hyperspectral microwave↗
NASA NTRS2022

The Global L-Band Observatory for Water Cycle Studies (Glows)– SMAP continuity Mission

SMOS and SMAP radiometers have demonstrated the ability to monitor soil moisture and sea surface salinity and continue to provide high quality radiometric measurements to this day in extended mission operations. It is important to maintain data continuity for these science measurements. The proposed instrument concept (Global L-band active/passive Observatory for Water cycle Studies - GLOWS) will enable low-cost L-band data continuity (that includes both L-band radar and radiometer measurements). The objective of this project is to develop key instrument technology to enable L-band observations using an Earth Venture class satellite. Specifically, a new deployable reflectarray lens antenna is being developed that will enable a smaller EELV Secondary Payload Adapter (ESPA) Grande-class satellite mission to continue the L-band observations at SMAP and SMOS resolution and accuracy at substantially lower cost, size, and weight

SMAP↗
NASA NTRS2019

Improving Brightness Temperature Measurements near Coastal Areas for SMAP

The Soil Moisture Active Passive (SMAP) mission is designed to acquire L-band radiometer measurements for the estimation of soil moisture with 0.04 m3/m3 volumetric accuracy in the top 5 cm for vegetation with water content of less than 5 kg/m2. In regions near the coast or near inland bodies of water, the signal measured by the SMAP radiometer contains emissions from land and water, resulting in errors in the soil moisture estimation. In this paper, the effort to extract the brightness temperature (TB) according to the land fraction or water fraction (depending on the center of the footprint location) from the affected SMAP measurements was addressed. A single pixel correction algorithm was applied and its performance was evaluated over simulated data. A data-driven approach for the estimation of land and water TB for data correction was developed. The correction algorithm was then applied to real data and its performance was assessed over the SMAP soil moisture retrievals. We showed that the single pixel algorithm is an effective and computationally efficient algorithm for removing land or water TB contamination from the SMAP data.

Julian Chaubell↗
NASA NTRS2017

Development and Assessment of the SMAP Enhanced Passive Soil Moisture Product

Launched in January 2015, the National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) observatory was designed to provide frequent global mapping of high-resolution soil moisture and freeze-thaw state every two to three days using a radar and a radiometer operating at L-band frequencies. Despite a hardware mishap that rendered the radar inoperable shortly after launch, the radiometer continues to operate nominally, returning more than two years of science data that have helped to improve existing hydrological applications and foster new ones.Beginning in late 2016 the SMAP project launched a suite of new data products with the objective of recovering some high-resolution observation capability loss resulting from the radar malfunction. Among these new data products are the SMAP Enhanced Passive Soil Moisture Product that was released in December 2016, followed by the SMAPSentinel-1 Active-Passive Soil Moisture Product in April 2017.This article covers the development and assessment of the SMAP Level 2 Enhanced Passive Soil Moisture Product (L2_SM_P_E). The product distinguishes itself from the current SMAP Level 2 Passive Soil Moisture Product (L2_SM_P) in that the soil moisture retrieval is posted on a 9 km grid instead of a 36 km grid. This is made possible by first applying the Backus-Gilbert optimal interpolation technique to the antenna temperature (TA) data in the original SMAP Level 1B Brightness Temperature Product to take advantage of the overlapped radiometer footprints on orbit. The resulting interpolated TA data then go through various correctioncalibration procedures to become the SMAP Level 1C Enhanced Brightness Temperature Product (L1C_TB_E). The L1C_TB_E product, posted on a 9 km grid, is then used as the primary input to the current operational SMAP baseline soil moisture retrieval algorithm to produce L2_SM_P_E as the final output. Images of the new product reveal enhanced visual features that are not apparent in the standard product. Based on in situ data from core validation sites and sparse networks representing different seasons and biomes all over the world, comparisons between L2_SM_P_E and in situ data were performed for the duration of April 1, 2015 October 30, 2016. It was found that the performance of the enhanced 9 km L2_SM_P_E is equivalent to that of the standard 36 km L2_SM_P, attaining a retrieval uncertainty below 0.040 m(exp 3)/m(exp 3) unbiased root-mean-square error (ubRMSE) and a correlation coefficient above 0.800. This assessment also affirmed that the Single Channel Algorithm using the V-polarized TB channel (SCA-V) delivered the best retrieval performance among the various algorithms implemented for L2_SM_P_E, a result similar to a previous assessment for L2_SM_P.

Enhanced↗
NASA NTRSDate not supplied

SMAP RFI Change Detection

The Soil Moisture Active Passive (SMAP) mission, launched on January 31, 2015, has completed its primary 3-year mission and is currently in its extended mission. Although operation occurs within the protected frequency allocation of 1400-1427 MHz, the SMAP radiometer is impacted by radio frequency interference (RFI). The radiometer was designed to provide detection and filtering of RFI in order to meet error budget requirements. A time series algorithm was developed to monitor, detect and report the changing environment with the objective of detecting new RFI sources as well as existing persistent sources. The detection of sources are used in RFI reporting to NASA spectrum management with the hope that interfering sources will be turned off by the necessary administrations.

Priscilla N Mohammed↗
NASA NTRSDate not supplied

The Hyperspectral Microwave Photonic Instrument (HyMPI)

We present an overview of the Hyperspectral Microwave Photonic Instrument (HyMPI), a NASA Instrument Incubation Proposal funded research project aimed at developing a hyperspectral microwave instrument intended for enhanced remote sensing of atmospheric temperature and water vapor from space. This paper provides preliminary results on HyMPI’s spectral and noise characteristics and a preliminary demonstration of its enhanced water vapor sensitivity and vertical resolution, with a particular focus on the Earth’s Planetary Boundary Layer.

Hyperspectral↗
NASA NTRSDate not supplied

Microwave and mm-Wave Radiometry for Earth and Planetary Science

Microwave radiometry has been an indispensable tool for observing Earth and the solar system since the 1960s. On Earth, microwave radiometers are used to observe ocean, land, ice, and atmosphere. Calibrating a microwave radiometer and measuring an LNA noise figure use the same principals. There is opportunity to improve upon the state-of-the-art methods in both space and lab environments by leveraging lessons learned in one for the other.

microwave radiometry↗
NASA NTRSDate not supplied

COSMIR-H: an Airborne Hyperspectral Microwave Sounder for Thermodynamic Sensing of the Planetary Boundary Layer

The NASA Planetary Boundary Layer (PBL) Incubation Study Team Report lists hyperspectral microwave (HMW) sensors as one of the “essential components” of a future global PBL observing system. HMW sensors will provide profiles of the PBL thermodynamic (temperature and water vapor) structure in synergy with passive infrared sounders and to complement active measurements (e.g., lidar and radar). While many simulation studies have been performed showing the benefit of HMW observations, measurements are needed to demonstrate the efficacy of hyperspectral retrievals. The Conical Scanning Millimeter-wave Imaging Radiometer (CoSMIR) is an airborne sensor that is currently being modified with digital spectrometers to create a HMW sounder with 4-MHz spectral resolution at 50.0-58.0 GHz and 175-191 GHz. The new CoSMIR-Hyperspectral (CoSMIRH) will collect measurements in July 2024 on the highaltitude NASA ER-2 aircraft. These measurements will advise on current knowledge gaps in HMW sounding and inform decisions on future spaceborne HMW sensors

radiometry↗