Search NASA⌕ Search

Engineering topics

Jenkins, M L

Publications and source records attributed to Jenkins, M L.

Langevin model for real-time Brownian dynamics of interacting nanodefects in irradiated metals

In situ real-time electron microscope observations of metals irradiated with ultrahigh-energy electrons or energetic ions show that the dynamics of microstructural evolution in these materials is strongly influenced by long-range elastic interactions between mobile nanoscale radiation defects. Treating long-range interactions is also necessary for modeling microstructures formed in ex situ high-dose-rate ion-beam irradiation experiments, and for interpolating the ion-beam irradiation data to the low-dose-rate limit characterizing the neutron irradiation environments of fission or fusion power plants. We show that simulations, performed using an algorithm where nanoscale radiation defects are treated as interacting Langevin particles, are able to match and explain the real-time dynamics of nanodefects observed in in situ electron microscope experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The temperature dependence of heavy-ion damage in iron: a microstructural transition at elevated temperatures.

A transition is reported in the dislocation microstructure of pure Fe produced by heavy-ion irradiation of thin foils, which took place between irradiation temperatures (T{sub irr}) of 300 C and 500 C. At T{sub irr} {le} 400 C, the microstructure was dominated by round or irregular non-edge dislocation loops of interstitial nature and with Burgers vectors b = 1/2 111, although interstitial 100 loops were also present; at 500 C only rectilinear pure-edge 100 loops occurred. At intermediate temperatures there was a gradual transition between the two types of microstructure. At temperatures just below 500 C, mobile 111 loops were seen to be subsumed by sessile 100 loops. A possible explanation of these observations is given.

36 MATERIALS SCIENCE↗

Vacancy defects in Fe : comparison between simulation and experiment.

The evolution of radiation damage under heavy-ion irradiation in thin foils of pure bcc Fe has been investigated by simulation and experiment. Simulations showed that vacancy loops are about as mobile as interstitial loops, and can be lost to the surface of a foil. Consistent with this, in situ real-time dynamic observations of the damage evolution showed that loops, many of which are believed to be of vacancy nature, were mobile and were often lost during irradiation. Atomistic simulations of vacancy defects in Fe showed that spherical voids, rather than vacancy loops, represent the lowest energy configurations for clusters of vacancies of any size. The simulations also indicated that the stability of loops strongly varies depending on their size. Closed loops above a critical diameter ({approx}2 nm) are highly metastable due to the difficulty of their transformation into voids. The greater stability of voids explains why the loop yield in Fe and other ferritic materials is very low.

36 MATERIALS SCIENCE↗

In-situ TEM and ion iradiation of ferritic materials.

The intermediate voltage electron microscope-tandem user facility in the Electron Microscopy Center at Argonne National Laboratory is described. The primary purpose of this facility is electron microscopy with in situ ion irradiation at controlled sample temperatures. To illustrate its capabilities and advantages a few results of two outside user projects are presented. The motion of dislocation loops formed during ion irradiation is illustrated in video data that reveals a striking reduction of motion in Fe-8%Cr over that in pure Fe. The development of extended defect structure is then shown to depend on this motion and the influence of nearby surfaces in the transmission electron microscopy thin samples. In a second project, the damage microstructure is followed to high dose (200 dpa) in an oxide dispersion strengthened ferritic alloy at 500 C, and found to be qualitatively similar to that observed in the same alloy neutron irradiated at 420 C.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dynamic observations of heavy-ion damage in Fe and Fe-Cr alloys.

We give an overview and summary of recent in-situ heavy-ion irradiation experiments on Fe and Fe-Cr alloys carried out on the Argonne IVEM Facility at irradiation temperatures up to 500 C. Several new and unexpected observations were made. At low doses the contrast of new irradiation-induced dislocation loops sometimes developed over time intervals as long as 0.2 s, many orders of magnitude longer than expected for a process of cascade collapse. In addition at temperatures {le} 300 C, 'hopping' of 1/2<111> loops was induced by the ion or electron beams, especially in UHP Fe. At high doses complex microstructures developed in all materials, involving the formation of large interstitial loops. At 300 C and RT these loops had Burgers vectors of type b = 1/2<111> and large shear components. At 500 C only edge loops with b = <100> were produced.

36 MATERIALS SCIENCE↗