Search NASA⌕ Search

Engineering topics

Jennifer Gooden

Publications and source records attributed to Jennifer Gooden.

12 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2024

Plasma Produced Gaseous Species for Food, Seed, and Equipment Sanitization

Researchers at KSC have shown that plasma produced gaseous species have shown greater than 5.89 log reduction of inoculated coupons and sanitization (greater than 3 log reduction) of produce and 3D printed materials, though with more variable results. The results were obtained using a recirculating plasma system, with 1 L of air, 1 mL of H 2 O, and less than 500 W of power being the only consumable commodities. The work is versatile and enabling for future missions since the air and the produced gases can be reused or recycled on board the spacecraft.

Kenneth Engeling↗
NASA NTRS2024

3D Printed Materials Characterization for Rapid Prototyping and Plant Growth

Through KSC IRTD funding in 2022, this project brought a list of 18, 3D printed filaments into formal characterization testing to provide a reference for their behaviors under relevant applications. The project format set up a series of tests to expose 3D printed specimens. A total of 1,989 individual 3D printed test specimens were sent across KSC to be scrutinized by three laboratories to fulfill a multidisciplinary assessment of each material TRL. Testing started with 18 materials. Initially, seed germination assays in the PPA, sample materials were enclosed in petri dishes with lettuce seeds on damp germination paper. No significant impacts on lettuce seed germination were observed in this testing. Next, sample coupons were printed and sent for materials testing to the KSC Analysis/Mechanical and Environmental Testing Laboratory, where they were subjected to 14- and 30-day soak periods in solutions used to provide nutrients to plants or to sanitize hardware before and after use. Following a long soak typical of a 30-day plant growout in Hoagland’s solution, 14 materials gained more than 10% of their own mass. This indicated an increased potential for leaching or providing conditions that are not food safe. Materials that exceeded 15% absorption by mass were eliminated from further testing. Based off this result, the team continued with a core list of nine filaments to fulfill Tensile, Flexural, Biofilm formation, and plant growth testing. Those materials were PLA (Raise3D), ABS (Raise3D), PETG (PolyethyleneTerephthalate Glycol) (Raise3D), ASA (Acrylonitrile Styrene Acrylate) (Raise3D), PC (Polycarbonate) (Raise3D), TPU (Thermoplastic polyurethane)-95 (Raise3D), PLA Copper (Gizmodorks), PP (Polypropylene) (Braskem), and HIPS (High Impact Polystyrene) (Gizmodorks). Testing also quantified the spectral impact of using different color 3D printed surfaces in a growth chamber. The material used for spectral testing was PLA. Printing employed a standard surface texture representative of all materials. It was shown through Tensile Testing (ASTM D638-22) that the breaking force of a 3D printed part greatly varied depending on layer orientation. This is common through all materials, and demonstrates that the strength of a 3D printed component can be maximized by layering the material normal to the primary force on the part. Four-point flexural testing (ASTM D790) provided quantities of interest, Flexural modulus, Flexural strength, Flexural stress, and strain at break within a 5% strain limit from each of nine materials. Biofilm formation testing was conducted in the Molecular and Microbiological Laboratory. Testing completed on specimens from each material showed equal formation on the surface. Additional plant growth testing was conducted in the PPA beyond the initial germination testing. The final assessment documents that three materials (PLA, ABS, and PC) have reached TRL 6 through extensive testing, and ultimate end-to-end applied use in experimental or testing conditions (flight and ground). TRL 5 materials (ASA, TPU-95, PLA Copper, PP, PETG, and HIPS) have all been successfully applied in Research and Development for crop growth applications and are ready to be applied in formal testing. TRL 4 materials Nylon910, PLA Carbon Fiber, PPA CF, PPA Glass Fiber (GF), NinjaFlex, and P-filament 721 are materials that were able to be printed and tested, but have yet to show data meeting applied requirements. TRL 3 NylonX, Flex TPE-185, and Nylon were unable to be reliably printed to fulfill testing. These results provide researchers with reference for materials to use during plant growth experimentation, and also set a standard for future characterization work applying 3D printing and materials to testing, research, and experimentation.

Gioia Massa↗
NASA NTRSDate not supplied

KSC to EDEN ISS: Outredgeous Lettuce Growth on the Passive Porous Tube Nutrient Delivery System (PPTNDS)

EDEN ISS is a controlled environment greenhouse established near the Neumayer Station III in Antarcticawith the mission to enable fresh crop production for the crew who are working in this remote location. EDEN provides a space to conduct plant biology and related research in a unique and isolated controlled environment (CE), while providing a platform to test developing methods relevant to long duration manned space missions. In 2021, Kennedy Space Center (KSC) scientist Jess Bunchek fulfilled a one-year mission at EDEN. During that time a variety of fresh crops were grown to record horticultural and microbiological data as well as provide the crew with fresh food to eat. One method for crop growth included an experimental irrigation system called the Passive Porous Tube Nutrient Delivery System (PPTNDS) which was developed at KSC as a microgravity-capable plant irrigation system designed to support Space Plant Biology investigations and/or crop growth during space missions. The PPTNDS was employed to grow Outredgeous Lettuce (OL) during two growouts at EDEN, (harvesting at Day After Planting (DAP) 61 and 63) and two growouts at KSC where plant growth and micro sample data were captured. This paper presents the data collected from the PPTNDS and compares it to growth on a Nutrient Film Technique (NFT) hydroponic system operated in the same environment. The result shows a system that grows OL at a reduced rate compared to the NFT system but uses less water and crew interaction to operate.

Jacob Torres↗
NASA NTRSDate not supplied

Evaluating Microgreens Crop Readiness for Space Production.

Microgreens are small-size, nutrient-rich, and fast-grown crops, which are considered as candidates for future space exploration missions. In particular, the ISS, the Lunar Gateway, and Mars and Lunar missions could benefit from growing microgreens to supplement astronaut diets in the near future. Research at NASA’s Kennedy Space Center has focused on (1) the selection of microgreens compatible species, (2) the evaluation of microgreens food safety, (3) the use of passive wicking, on-demand watering, and hydroponics cultivation, (4) simulated microgravity growth, (5) microgreen canopy gas exchange, and (6) harvesting techniques in microgravity. This presentation summarizes this research. Microgreen species will be evaluated for their yield in relationship to the quantity of inputs – water, seeds, substrate, light intensity, photoperiod, crew time – required for their growth; for their organoleptic and sensory factors in order to down select species that are highly acceptable for humans; and for their microbial loads as detected in their growth environment and the food safety metrics of their edible tissue. Passive wicking, on-demand watering, and hydroponic systems are being studied as an efficient way to deliver essential nutrients and water to microgreens, included in a microgravity environment. Growth studies in simulated microgravity (using 3-dimensional clinostats) will assess microgreens growth relative to that in 1g. Gas exchange studies on microgreens canopies in various airflows will assess their photosynthesis and transpiration. Finally, a series of parabolic flights has enabled the evaluation of different harvesting and bagging techniques in microgravity. Indeed, traditional plant harvesting methods (scissors) in microgravity could generate significant microgreen debris in the space station cabin. Two innovative techniques, coupled to a dedicated bagging method, were designed and evaluated against the control, traditional, harvesting technique. This research was supported by grants from NASA KSC’s Independent Research and Technology Development Program, NASA’s Flight Opportunity Program, NASA Postdoctoral Program Fellowships (L.P. & C.J.) supported by NASA’s Space Biology program, and support from NASA’s Human Research Program.

crop↗
NASA NTRSDate not supplied

Silver Foam: A Novel Approach for Long-Term Passive Dosing of Biocide in Spacecraft Potable Water Systems – Update 2023

A spacecraft water disinfection system, suitable for extended length space exploration, should prevent or control the growth of microbes, prevent or limit biofilm formation, and prevent microbiologically influenced corrosion. In addition, the system should have minimal maintenance requirements, be chemically compatible with all materials in contact with the water, be safe for human consumption, and be suitable to be shared across international spacecraft platforms and mission architectures. Silver ions are a proven broad-spectrum potable water biocide under investigation for future exploration missions. The competing technology for dosing silver ions in future water systems is based on actively dosing the ions via electrolytic production. Several challenges with this approach have prompted additional investigations into alternative dosing techniques. Control-release technology is an attractive option for developing a high-reliability passive silver dosing device. This paper describes the continued development of a nanoparticle/polyurethane (NP/PU) composite foam for the controlled release of silver ions and is intended to build upon the 2022 International Conference on Environmental Systems (ICES) paper number 97. This paper provides the technical background and performance test results (ongoing long-term silver ion release testing and product variability testing) from the silver chloride (AgCl) NP/PU composite foams. The ultimate goal of the project is to develop a stable and reliable passive dosing silver ion release device for use in future spacecraft potable water systems.

Tesia D. Irwin↗
NASA NTRSDate not supplied

Silver Foam: A Novel Approach for Long-Term Passive Dosing of Biocide in Spacecraft Potable Water Systems – Update 2024

A spacecraft water disinfection system, suitable for extended length space exploration, should prevent or control the growth of microbes, prevent or limit biofilm formation, and prevent microbiologically influenced corrosion. In addition, the system should have minimal maintenance requirements, be chemically compatible with all materials in contact with the water, be safe for human consumption, and be suitable to be shared across international spacecraft platforms and mission architectures. Silver ions are a proven broad-spectrum potable water biocide under investigation for future exploration missions. The competing technology for dosing silver ions in future water systems is based on actively dosing the ions via electrolytic production. Several challenges with this approach have prompted additional investigations into alternative dosing techniques. Control-release technology is an attractive option for developing a high-reliability passive silver dosing device. This paper describes the continued development of a nanoparticle/polyurethane (NP/PU) composite foam for the controlled release of silver ions and is intended to build upon the 2023 International Conference on Environmental Systems (ICES) paper number 251. This paper provides the technical background and performance results for the product variability testing and microbial check valve (MCV) testing of the silver chloride (AgCl) NP/PU composite foams, referred to as AgFoams. The ultimate goal of the project is to develop a stable and reliable passive dosing silver ion release device for use in future spacecraft potable water systems.

Tesia D Irwin↗