Engineering topics

Jennifer Lee Dungan

Publications and source records attributed to Jennifer Lee Dungan.

5 records

NASA NTRSDate not supplied

GeoNEX: A Geostationary Earth Observatory

The latest generation of geostationary satellites (Himawari 8/9, GOES-16/17, FY-4, GK-2A) carries sensors that closely mimic the spatial and spectral characteristics of widely used polar-orbiting, global monitoring sensors such as MODIS and VIIRS. When combined, data from various currently operating/planned geostationary platforms provide a geo-ring of hyper-temporal (5-10 minutes), multispectral observations at spatial resolutions as high as 500 m. These high frequency observations offer exciting new possibilities for monitoring our planet, including better retrievals of geophysical variables by overcoming cloud cover, enabling studies of diurnally varying phenomena in the atmosphere, land, and the oceans, and support operational decision-making in agriculture, hydrology and disaster management. The NASA Earth Exchange (NEX) team, in collaboration with scientists from JAXA, KARI, NOAA and other international institutions, created the GeoNEX (www.nasa.gov/geonex) pipeline to integrate data from all available geostationary platforms and produce and distribute spatially, temporally, and radiometrically consistent data for the earth science community. We envision various institutions adapting the Geo component (e.g., GeoNOAA, GeoKARI, GeoChiba, GeoJAXA, GeoCMA) and customizing the pipeline and downstream products to serve the local/regional research and applied science communities. To facilitate collaborative work among the partners, we have established the OpenNEX platform on the public cloud. OpenNEX provides researchers, developers, educators, and ordinary users with easy access to an integrated Earth science computational and data platform, enabling citizen scientists and application developers to realize the full value of GeoNEX data assets and software tools.

GeoNEX↗

NASA NTRSDate not supplied

Generation of Land Surface Reflectance with Combined Geo-KOMPSAT-2A AMI and Himawari 8 AHI Observations

The latest generation of geostationary satellites has opened a new era of Earth observations with unprecedented spatiotemporal resolution and spectral range. Together with GOES 16/17 ABI, FY4-A AGRI, and Himawari-8 AHI, a new Korean geostationary satellite (Geo-KOMPSAT-2A AMI) has operationally collected a full-disk image in 16 channels every ten minutes since July 2019, allowing diurnal land surface monitoring over a large proportion of Asia and all of Oceania. Retrieving accurate surface reflectance (SR) over land from GK-2A/AMI is a challenging but high priority objective. One of the challenges is the absence of a spectral band in the 2.2 m SWIR range from AMI, which is required by many atmospheric correction algorithms to retrieve atmospheric aerosol properties. To remedy this issue, we adopt a strategy that combines concurrent GK-2A/AMI and Himawari 8/AHI observations in order to derive AMI SR. We have adapted the NASA Multi-Angle Implementation of Atmospheric Correction (MAIAC) algorithm to process the data stream from Himawari 8/AHI. The advantages of the MAIAC algorithm is its capability to exploit the high temporal frequency and varying illumination geometry of the geostationary data for advanced cloud/snow detection, aerosol retrieval, and characterization of surface bidirectional reflectance properties. Leveraging the similarities of spectral bands and the sun-target-sensor geometry between AMI and AHI, we are able to create denser time series of observations and enhanced BRDF samples over most of the spatial coverage of AMI (and AHI). The combined stereo-type observations not only help derive SR for AMI but also enhance retrievals of the corresponding AHI surface products. We evaluate the resulting AMI SR using ground (AERONET) observations and corresponding MODIS products. Further, we discuss potential challenges in utilizing the geostationary satellite data for land surface monitoring.

geostationary satellite↗

NASA NTRSDate not supplied

Detecting Short Term Drought Impact in the Southwest US Using GOES-16 ABI Data

Satellite optical remote sensing has been often used for monitoring broad-region vegetation change, for example, phenology observations and the year-to-year leaf area index (LAI) responses to climate oscillations. However, rapid responses of vegetation to day-to-day weather perturbations are difficult to detect using available optical remote sensing satellites because of the low frequency of the observations. Sun-synchronous optical sensors, such as Moderate Resolution Imaging Spectroradiometer (MODIS) and Advanced Very High Resolution Radiometer (AVHRR), can observe a target area once a day. Daily observations cannot distinguish whether short-term changes in Normalized Differential Vegetation Index (NDVI) are actual LAI change or cloud contamination. NOAA’s GOES satellites make observations every 10 to 15 minutes using the Advanced Baseline Imager (ABI). In this study, we used the Geostationary-NASA Earth Exchange (GeoNEX) L1G Top-of-Atmosphere (TOA) ABI data to detect drought impact on NDVI time series in the Southwest US. We used an empirical method to cancel the BRDF effect of varying solar zenith angle. The ABI was able to detect short term drought impacts as well as an NDVI decrease in the dry season. Increased NDVI right after a rainfall followed by an immediate decrease was observed. These ABI NDVI changes were correlated with the RGB time series from PhenoCam Network data. Results indicated that the ABI can be used for short-term analysis of LAI and can detect small LAI changes caused by drought in an arid area, suggesting the potential for its use in near-real time drought monitoring applications.

ABI↗

NASA NTRSDate not supplied

Development of a Global Reference Surface Reflectance and BRDF Datasets from Geostationary Satellite Observations and AERONET Measurements

Surface reflectances and their dependency on illumination-view geometries (i.e., BRDF) are the foundation of many high-level satellite products for land and water monitoring. Yet it is difficult to evaluate the quality of satellite-based surface reflectances with ground-based measurements due to the spatial scale differences. In order to fill the gap, here we develop a reference dataset of surface reflectance and BRDF at the global AERONET sites with data streams from operational geostationary sensors including Himawari 8/9 AHI, GK-2A AMI, and GOES 16/17 ABI. Taking the top-of-atmosphere (TOA) reflectance and the site measured atmospheric aerosol optical depth (AOD) as the main inputs, we apply the GeoNEX-AC algorithm to performance accurate atmospheric correction and derive 10-minute surface reflectance and daily Ross-Thick-Li-Sparse (RTLS) BRDF parameters at AERONET sites where coincident AOD measurements and TOA observations are available from 2016 (for Himawari) or 2018 (for GOES) onwards. The algorithm ensures that the retrieved surface BRDF parameters, along with the site-measured AOD, allow the atmospheric radiative transfer model, SHARM, accurately simulate the observed TOA reflectance at diurnal and longer time scales. They are our best estimates of the surface optical properties and thus can serve as the “reference” to evaluate the performance of operational atmospheric correction algorithms (where AOD is assumed unknown and needs to be retrieved). The reference BRDF also allow us to evaluate the spectral band ratios between the SWIR (e.g., 2200 nm) and the visible (e.g., 650 nm) regions, which are commonly used in operational atmospheric correction algorithms. Finally, we demonstrate that the reference dataset can be used to develop potential data synergies between different GEO satellites as well as GEO-LEO sensors.

Weile Wang↗

NASA NTRSDate not supplied

Development of the Ames Global Hyperspectral Synthetic Dataset

This study develops the surface BRDF (bidirectional reflectance distribution function) product of the Ames Global Hyperspectral Synthetic Dataset (AGHSD), based on the corresponding MODIS products, to support the NASA Surface Biology and Geology mission development. A main challenge in deriving a hyperspectral dataset from the multi-band satellite products is how to identify a succinct yet robust algorithm that allow us to infer BRDF at unobserved wavelengths based on the few observed bands. Using the theories of radiative transfer in vegetation canopies, we arrive at a simple equation that accurately approximates hyperspectral surface BRDF as the weighted sum of components from the soil and the vegetation. Each of the components is modeled by the product of the spectrally-dependent optical properties of a surface element (the spectra of the soil surface reflectance, the leaf single albedo, or the canopy scattering coefficient) and a spectrally-independent bidirectional scattering function. The optical properties of the soil and the vegetation can be obtained from existing spectral libraries or model simulations. The bidirectional scattering functions are represented by the Ross-Thick-Li-Sparse BRDF model, where the linear coefficients are estimated with regression analysis from the multi-band MODIS data. We validate the algorithm with simulations by Monte Carlo Ray Tracing model experiments, and the results are highly consistent with the theoretic derivation. We apply the algorithm to generate the AGHSD BRDF product at 1km and 8-day resolutions for the year of 2019. The results are biogeochemically and physically coherent and consistent, and thus serve the goal to support the science and application development of the SBG community.

Hyperspectral↗