Search NASA⌕ Search

Engineering topics

Jeon, Dong-O

Publications and source records attributed to Jeon, Dong-O.

Practical transverse matching of a high intensity SNS linac

It is important to accomplish adequate matching for a high intensity linear accelerator such as the SNS linac to minimize the mismatch and potential beam loss. In the early stage of the SNS linac design, there was a discussion over whether to match the core or to match the tail. A study shows that the matching by minimizing rms emittances reduces both the core emittance and the beam tail, providing a robust matching for the SNS Drift Tube Linac, when an emittance scanner is available. For the transverse matching of other sections of the SNS linac where only wire-scanners are available, we use beam size data obtained from multiple wire-scanners installed in series to do the matching with the help of an envelope code such as Trace3D. It is verified that matching is improved through the matching technique based on the beam profile measurements from wire-scanners in series.

43 PARTICLE ACCELERATORS↗

Fourth order resonance of a high intensity linear accelerator*

For a high intensity beam, the 4\nu=1 resonance of a linear accelerator is manifested through the octupolar term of space charge potential when the depressed phase advance \sigma is close to and below 90 but no resonance effect is observed when \sigma just above 90 . To verify that this is a resonance, a frequency analysis is performed and a study of resonance crossing from above and from below the resonance is conducted. It is observed that this fourth order resonance is dominating over the better known envelope instability and practically replacing it. Simulation study shows a clear emittance growth by this resonance and its stopband. One of the authors [DJ] proposed an experiment to measure the stopband of this resonance to GSI using the UNILAC.

43 PARTICLE ACCELERATORS↗

PROTOTYPE LASER EMITTANCE SCANNER FOR SNS ACCELERATOR

Taking Advantage of recent successes with the Laser Profile monitor, a new prototype is being built to use the laser wire as both a profile monitor and a slit for an emittance measuring device. This improved system takes advantage of the steering dipole magnet prior to ring injection of SNS such that only the recently stripped H0 protons continue forward to the emittance device. In this way we hope to make an emittance device that is both parasitic to neutron production, and capable of accurate measurements during full power applications.

43 PARTICLE ACCELERATORS↗

THE LASER EMITTANCE SCANNER FOR 1 GEV H- BEAM

A transverse phase space laser emittance scanner is proposed [1] and under development for the 1-GeV H- SNS linac, using a laser beam as a slit. For a 1-GeV H- beam, it is difficult to build a slit because the stopping distance is more than 50 cm in copper. We propose a Laser Emittance Scanner (LES) to use a laser beam as an effective slit by stripping off the outer electron of the H- (making it neutral) upstream of a bend magnet and measuring the stripped component downstream of the bend magnet. The design and modeling of the system will be discussed. We are expecting to make a preliminary measurement in 2009.

43 PARTICLE ACCELERATORS↗

A FOURTH ORDER RESONANCE OF A HIGH INTENSITY LINAC

The 4sigma=360 (or 4nu=1) resonance of a linac is manifested when the depressed tune sigma is close to and below 90 . It is observed that this fourth order resonance is dominating over the better known envelope instability and practically replacing it. Simulation study shows a clear emittance growth by this resonance and its stopband. Experimental measurement of the stopband of this resonance was proposed and conducted in 2008 using the GSI UNILAC confirming this resonance. The result is presented at a separate paper in this conference

43 PARTICLE ACCELERATORS↗