Search NASA⌕ Search

Engineering topics

Jeong, Seonghun

Publications and source records attributed to Jeong, Seonghun.

5 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Alternative Solid‐State Synthesis Route for Highly Fluorinated Disordered Rock‐Salt Cathode Materials for High‐Energy Lithium‐Ion Batteries

Abstract Fluorination has been identified as a key element for enabling the stable cycling of earth‐abundant manganese‐based disordered rock salt (DRX) cathodes. However, fluorination in the DRX bulk remains a challenge for scalable solid‐state synthesis. In this study, a tailored reaction pathway is proposed to synthesize a highly fluorinated DRX. It is demonstrated for the first time that the unconventional precursors, Li 6 MnO 4 , MnF 2 , and TiO 2 , can avoid the formation of Mn‐based intermediates (such as Li 2 (Mn,Ti)O 3, LiMnO 2 , and Mn 3 O 4 ), which, once formed, persist until the synthesis temperature reaches close to or above that required for fluorine volatility. Therefore, this method can form a highly fluorinated DRX with a composition of Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) at a low temperature (800 °C) relative to that required for conventional DRX solid‐state reactions (≥900 °C). Li 1.23 Mn 0.40 Ti 0.37 O 2−y F y ( y = 0.29–0.34) delivers a specific capacity above 300 mAh g −1 and a specific energy of 980 Wh kg −1 at 30 °C. Detailed characterization reveals that this DRX phase reversibly utilizes Mn 2+/3+ redox in the low‐voltage region and Mn 3+/4+ redox in the middle‐voltage range, whereas reversible oxygen redox is observed at high potentials.

Avvaru, Venkata Sai↗
DOE OSTI2024

High-entropy Li-rich layered oxide cathode for Li-ion batteries

High-entropy oxides (HEOs) are emerging as promising cathode materials for Li-ion batteries (LIBs) due to their stable solid-state phase and compositional flexibility. Herein, we investigate the structural and electrochemical properties of a novel non-equimolar high-entropy cathode material, termed high-entropy Li-rich layered oxide (HE-LLO, Li 1.15 Na 0.05 Ni 0.19 Mn 0.56 Fe 0.02 Mg 0.02 Al 0.02 O 1.97 F 0.03 ), in comparison to a pristine Li-rich layered oxide (PR-LLO, Li1.2Ni0.2Mn0.6O2). The incorporation of multiple cations (Na + , Al 3+ , Mg 2+ , Fe 3+ ) and anion (F - ) into HE-LLO introduces compositional diversity, enhancing structural stability through the entropy stabilization effect. Theoretical calculations confirm a significantly higher configurational entropy in HE-LLO compared to PRLLO, supporting its high-entropy nature. Electrochemical evaluations demonstrate that HE-LLO exhibits considerable capacity retention, preserving 76.8 % of its discharge capacity at 0.5C after 200 cycles, compared to only 36.2 % for PR-LLO. Even under high-temperature conditions, HE-LLO outperformed PR-LLO, maintaining 76.1 % of its discharge capacity after 100 cycles at 5C, while PR-LLO retained only 12.4 %. These enhancements are attributed to the improved phase reversibility and higher Li + ion diffusion coefficients of HE-LLO, validated by ex-situ characterizations using a synchrotron X-ray technique, along with density functional theory (DFT) calculations. In conclusion, these findings highlight the promise of non-equimolar HEOs as a novel design strategy for highperformance cathode materials.

25 ENERGY STORAGE↗
DOE OSTI2023

Enhanced Optical Contrast and Switching in Near‐Infrared Electrochromic Devices by Optimizing Conjugated Polymer Oligo(Ethylene Glycol) Sidechain Content and Gel Electrolyte Composition

Abstract A detailed investigation addressing the effects of functionalizing conjugated polymers with oligo(ethylene glycol) (EG n ) sidechains on the performance and polymer‐electrolyte compatibility of electrochromic devices (ECDs) is reported. The electrochemistry for a series of donor‐acceptor copolymers having near‐infrared (NIR)‐optical absorption, where the donor fragment is 3,4‐ethylenedioxythiophene (EDOT) or an EG n functionalized bithiophene (g2T) and the acceptor fragment is diketopyrrolopyrrole (DPP) functionalized with branched alkyl or EG n sidechains, is extensively probed. ECDs are next fabricated and it is found that EG n sidechain incorporation must be finely balanced to promote polymer‐electrolyte compatibility and provide efficient ion exchange. Proper electrolyte‐cation pairing and polymer structural tuning affords a 2x increase in optical contrast (from 12% to 24%) and >60x reduction in switching time (from 20 to 0.3 s). Atomic force microscopy (AFM)/grazing incidence wide‐angle X‐ray scattering (GIWAXS) characterization of the polymer film morphology/microstructure reveals that an over‐abundance of EG n sidechains generates large polymer crystallites, which can suppress ion exchange. Lastly, time‐of‐flight secondary ion mass spectrometry (ToF‐SIMS) indicates sidechain/electrolyte identity does not influence the electrolyte penetration depth into the films, and EG n sidechain inclusion increases electrolyte cation uptake. The material structural design insight and guidelines regarding the polymer‐electrolyte ion insertion/expulsion dynamics reported here should be of significant utility for developing next‐generation mixed ionic‐electronic conducting materials.

Chemistry↗
DOE OSTI2023

Anthradithiophene (ADT)-Based Polymerized Non-Fullerene Acceptors for All-Polymer Solar Cells

Realizing efficient all-polymer solar cell (APSC) acceptors typically involves increased building block synthetic complexity, hence potentially unscalable syntheses and/or prohibitive costs. Here we report the synthesis, characterization, and implementation in APSCs of three new polymer acceptors P1–P3 using a scalable donor fragment, bis(2-octyldodecyl)anthra[1,2-b : 5,6-b’]dithiophene-4,10-dicarboxylate (ADT) co-polymerized with the high-efficiency acceptor units, NDI, Y6, and IDIC. Further, all three copolymers have comparable photophysics to known polymers; however, APSCs fabricated by blending P1, P2 and P3 with donor polymers PM5 and PM6 exhibit modest power conversion efficiencies (PCEs), with the champion P2-based APSC achieving PCE=5.64 %. Detailed morphological and microstructural analysis by AFM and GIWAXS reveal a non-optimal APSC active layer morphology, which suppresses charge transport. Despite the modest efficiencies, these APSCs demonstrate the feasibility of using ADT as a scalable and inexpensive electron rich/donor building block for APSCs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗