Search NASA⌕ Search

Engineering topics

Jian, Shen

Publications and source records attributed to Jian, Shen.

Sintering dense NiZn ferrite by two-step sintering process

A two-step sintering process has been adopted to produce NiZn ferrite with composition of (NiO){sub 0.35}(ZnO){sub 0.57}(CuO){sub 0.08}(Fe{sub 2}O{sub 3}). The densification, microstructure, and magnetic properties of the ferrite have been investigated and compared with those of ferrites produced by the traditional final-stage sintering process. It was found that the sample produced by a two-step sintering process with a high temperature of 1200 deg. C and a lower temperature of 1100 deg. C attained more than 96% of the theoretical density and had a uniform microstructure with a small average grain size. It also exhibited good performances in terms of permeability and Q-factor. Hence, this would seem to be an effective method for producing dense ferrites with a microstructure composed of small and even grains, which is a very effective strategy for improving the magnetic properties of ferrites.

36 MATERIALS SCIENCE↗

Synthesis and magnetic properties of Co-Ti-Bi codoped M-type barium ferrite

The effects of Co{sup 2+}, Ti{sup 4+}, and Bi{sup 3+} substitution on the microstructures and properties of low-temperature fired M-type barium hexaferrites have been studied in order to adapt the development of low-temperature cofired ferrites technology and produce gyromagnetic devices with a multilayer process. It is found that Bi{sup 3+} ions can enter into the 2a sublattice and consequently enhance the grain growth and densification due to the activation of the lattice, which in turn first lead to an increase and then a decrease of M{sub s}. The substitution of Bi{sup 3+} ions is beneficial to forming the M phase and lowers the sintering temperature to about 900 deg. C, which is ideal for cofiring with silver paste. Scanning electron microscope and x-ray diffraction analysis have shown that the samples have excellent crystalline grains with a uniform size about 1-2 {mu}m. Moreover, nonmagnetic Ti{sup 4+} ions prefer to enter the 4f{sub VI} octahedral sites, giving rise to the weakening of the strong 12k-4f{sub VI} superexchange path and thus the isotropic exchange energy approaches the other second-order terms on the magnetic Hamiltonian, such as the antisymmetric interaction or even the magnetocrystalline anisotropy. With increasing the substitution content, some Co{sup 2+} ions, which locate in octahedral 12k sites, give a strong planar contribution to the anisotropy. Therefore, M{sub s} and H{sub c} decrease with the Co-Ti-substitution.

36 MATERIALS SCIENCE↗

Effect of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO glass on the dielectric and magnetic properties of ferroelectric/ferromagnetic composite for low temperature cofired ceramic technology

Ni-Cu-Zn ferrite/BaTiO{sub 3} composites with different additive amounts of B{sub 2}O{sub 3}-Bi{sub 2}O{sub 3}-SiO{sub 2}-ZnO (BBSZ) glass have been prepared by a conventional solid-reaction method and sintered at 900 deg. C to adapt to low temperature cofired ceramic (LTCC) technology. The dielectric and magnetic properties of the composites can be effectively improved with increasing BBSZ content. Here, the BBSZ glass mainly plays two roles, one is as a sintering aid promoting grain growth and the other is as a low permittivity phase or nonmagnetic phase leading to dilution effect on the dielectric or magnetic properties of the composites. The effect degree of above two roles is related to the variation in BBSZ content and has been discussed combining with the effective medium theory. The lower and upper bounds for the effective permittivity and permeability have been given by the Maxwell-Garnett rules.

36 MATERIALS SCIENCE↗

Electric dipolar interaction assisted growth of single crystalline organic thin films

We report on a forest-like-to-desert-like pattern evolution in the growth of an organic thin film observed by using an atomic force microscope. We use a modified diffusion limited aggregation model to simulate the growth process and are able to reproduce the experimental patterns. The energy of electric dipole interaction is calculated and determined to be the driving force for the pattern formation and evolution. Based on these results, single crystalline films are obtained by enhancing the electric dipole interaction while limiting effects of other growth parameters.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation between sputtering parameters and composition of SmCo-based films for microelectromechanical system applications

About 3.0 {mu}m thick SmCo-based films with additives of Fe, Cu, and Zr were deposited on Si substrates. Based on a developed semiempirical theoretical model, the dependence of the film composition on the sputtering parameters was discussed. The experimental results show that the Sm concentration increases with decreasing sputtering power or increasing Ar gas pressure, which are in good agreement with the calculated results when the preferential sputtering effect is disregarded. The effect of the sputtering parameters on the film composition provides an opportunity for the same composite target to fabricate films with Sm concentration varying from 13.8 to 17.3 at. %, which is reasonable for the permanent magnetic phase transformation (Sm{sub 2}Co{sub 17}{yields}SmCo{sub 7}{yields}SmCo{sub 5}). Furthermore, the observed TbCu{sub 7}-type film shows a better crystal texture with a low remanence ratio for the hysteresis loops measured out plane to in plane of 0.08.

36 MATERIALS SCIENCE↗