Search NASA⌕ Search

Engineering topics

Jiang, Daqiang

Publications and source records attributed to Jiang, Daqiang.

14 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An in-situ study of low thermal expansion and internal stress evolution in FeMn alloys

The mechanism of low thermal expansion phenomenon in antiferromagnetic FeMn alloys needs to be revealed. In this work, the evolution of lattice thermal expansion and internal stress in FeMn alloys was investigated by in-situ synchrotron X-ray diffraction during thermal cycling. Preceding the martensitic transformation, the coefficient of lattice thermal expansion (CLTE) decreased and the full width at half maximum (FWHM) of the diffraction peaks broadened abnormally. The evolution of the lattice thermal expansion and the FWHM were both reversible and isotropic. The additional reflection spots around the fundamental diffraction spots in the electron diffraction patterns of austenite and the dispersed nano-scale martensite embryos in austenite observed in the dark field TEM images proves the existence of premartensitic transformation. Finally, similar phenomena were found in FeMn Invar alloy, which indicate that the Invar effect is closely related to the internal stress evolution caused by premartensitic transformation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Enhanced superelasticity of nanocrystalline NiTi/NiTiNbFe laminar composite

This study explores a new concept of the synergy between two constituent shape memory alloys (SMAs) in a composite to achieve a wide superelastic temperature window. In this work, a nanocrystalline NiTi/NiTiNbFe dual-SMA composite is designed, in which two constituent SMAs are both capable of stress-induced martensitic transformation, but within different temperature ranges. Based on the principle of lattice strain matching between the two SMAs, superelastic martensitic transformation in one induces superelastic transformation in the other at temperatures the latter will not when standing alone. Furthermore, via this synergy the composite is able to achieve an ultra-wide superelastic temperature window of 336°C, from -196 to 140°C, with a ~5% tensile strain recovery and high superelastic stresses in the range of 700~1400 MPa. Such properties appear superior to all NiTi-based shape memory alloys to date.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Nanocrystalline strain glass TiNiPt and its superelastic behavior

TiNi-based shape-memory alloys are known to exhibit a strain glass state under certain conditions, generally in the presence of high-density defects such as excess solute atoms or alloying elements, dislocations, and nanoprecipitates. In this paper, we report a strain glass transition in a nanocrystalline Ti 50 Ni 35 Pt 15 alloy. The nanocrystalline strain glass state is achieved by a combined effect of high-density grain boundaries and high concentration doping of Pt atoms in the B2 matrix. The nanocrystalline Ti 50 Ni 35 Pt 15 strain glass alloy showed a large near-complete progressive superelasticity with a recovery strain of about 6% and a low apparent Young's modulus of about 30 GPa in a wide temperature range of over 200 °C. In situ synchrotron x-ray diffraction measurement showed that the strain glass B2 [B2(SG)] phase experienced B2(SG)→R→B19 transformation upon loading and B19→B2(SG) upon unloading. The findings of this study provide insight for the development of nanocrystalline strain glass shape-memory alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2020

High performance Nb/TiNi nanocomposites produced by packaged accumulative roll bonding

Taking full advantage of intrinsic high strength of nano-reinforcements has been proven difficult in a composite until the concept of strain matching was experimental verified in a nanowire Nb/TiNi in-situ composite, which was obtained via solidifying eutectic Nb/TiNi and subsequent severe wire drawing. However, the volume fraction of the nano-reinforcement was dictated by eutectic reaction, which severely limited the development of high-performance composites. Here, the martensitic transformation nanocomposites were successfully acquired with increased volume fraction and changeable morphology of the nano-reinforcement through hot packaged ARB (PARB) and subsequent wire drawing. The nano-reinforcement with lamellar configuration in the composite could exhibit a large lattice strain of similar to 3.8%, which demonstrated the applicability and effectiveness of the strain matching principle in nano-lamellar composite. The obtained composites show a yield strength over 2.0 GPa and a quasi-linear elastic strain as larger as similar to 6.5% with adjustable apparent elastic modulus from 30 to 50 GPa.

42 ENGINEERING↗
DOE OSTI2020

Superior strength-ductility synergy by hetero-structuring high manganese steel

Lacking of forest hardening makes low ductility in steels long challenge particularly at high yield strength. Here, we report to make good use of hetero-structuring for superior strength-ductility synergy in high manganese steel. The point is to retain original deformed structure of large quantity, along with recrystallized ultrafine-grains and fine grains, jointly for most effective heterogeneous deformation-induced (HDI) hardening especially at high strength. The residual plastic strain of larger than 0.2% and large proportion of HDI stress over 60% indicate the crucial role in ductility by HDI hardening. This renders a significantly upgraded strength-ductility combination within high strength scope.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Large elastic strains and ductile necking of W nanowires embedded in TiNi matrix

The deformation behaviors of W nanowires embedded in a TiNi matrix were investigated by means of in-situ synchrotron high energy X-ray diffraction (HEXRD) and in-situ transmission electron microscopy (TEM) analysis during tensile deformation. The HEXRD measurement indicated that the W nanowires exhibited an average lattice strain of about 1.50 %, whereas the TEM examination revealed a local elastic strain of about 4.59 % in areas adjacent to the TiNi matrix where stress-induced martensitic transformation occurred. This strain corresponds to a stress of ~15 GPa for the W nanowires. In addition, in areas adjacent to the TiNi matrix where plastic deformation and cracking were generated, the W nanowire showed significant ductile necking with ~80 % reduction in cross-section area. In conclusion, the ductile necking of W nanowire is attributed to the lack of protection from the stress-induced martensitic transformation of the TiNi matrix.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Achieving 5.9% elastic strain in kilograms of metallic glasses: Nanoscopic strain engineering goes macro

The ideal elastic limit is the upper bound of the achievable strength and elastic strain of solids. However, the elastic strains that bulk materials can sustain are usually below 2%, due to the localization of inelastic deformations at the lattice scale. In this study, we achieved >5% elastic strain in bulk quantity of metallic glass, by exploiting the more uniform and smaller-magnitude atomic-scale lattice strains of martensitic transformation as a loading medium in a bulk metallic nanocomposite. The self-limiting nature of martensitic transformation helps to prevent lattice strain transfer that leads to the localization of deformation and damage. This lattice strain egalitarian strategy enables bulk metallic materials in kilogram-quantity to achieve near-ideal elastic limit. This concept is verified in a model in situ bulk amorphous (TiNiFe)-nanocrystalline (TiNi(Fe)) composite, in which the TiNiFe amorphous matrix exhibits a maximum tensile elastic strain of similar to 5.9%, which approaches its theoretical elastic limit. As a result, the model bulk composite possesses a large recoverable strain of similar to 7%, a maximum tensile strength of above 2 GPa, and a large elastic resilience of similar to 79.4 MJ/m 3 . The recoverable strain and elastic resilience are unmatched by known high strength bulk metallic materials. This design concept opens new opportunities for the development of high-performance bulk materials and elastic strain engineering of the physiochemical properties of glasses.

36 MATERIALS SCIENCE↗