Pressure-induced permanent annihilation of free volume in L a 75 A l 25 metallic glasses
Not provided.
Engineering topics
Publications and source records attributed to Jiang, Sheng.
Not provided.
Abstract not provided
In this work, we report a comprehensive study of the spin ladder compound BaFe 2 S 2.5 Se 0.5 using neutron diffraction, inelastic neutron scattering, high pressure synchrotron diffraction, and high pressure transport techniques. We find that BaFe 2 S 2.5 Se 0.5 possesses the same C m c m structure and stripe antiferromagnetic order as does BaFe 2 S 3 , but with a reduced Néel temperature of T N = 98 K compared to 120 K for the undoped system, and a slightly increased ordered moment of 1.40 μ B per iron. Additionally, the low-energy spin excitations in BaFe 2 S 2.5 Se 0.5 are likewise similar to those observed in BaFe 2 S 3 . However, unlike the reports of superconductivity in BaFe 2 S 3 below T c ~ 14 K under pressures of 10 GPa or more, we observe no superconductivity in BaFe 2 S 2.5 Se 0.5 at any pressure up to 19.7 GPa. In contrast, the resistivity exhibits an upturn at low temperature under pressure. Furthermore, we show that additional high-quality samples of BaFe 2 S 3 synthesized for this study likewise fail to become superconducting under pressure, instead displaying a similar upturn in resistivity at low temperature. These results demonstrate that microscopic, sample-specific details play an important role in determining the ultimate electronic ground state in this spin ladder system. We suggest that the upturn in resistivity at low temperature in both BaFe 2 S 3 and BaFe 2 S 2.5 Se 0.5 may result from Anderson localization induced by S vacancies and random Se substitutions, enhanced by the quasi-one-dimensional ladder structure.
In this study, we report results of the high-pressure Hall coefficient (R H ) measurements in the putative topological Kondo insulator SmB 6 up to 37 GPa. Below 10 GPa, our data reveal that R H (T) exhibits a prominent peak upon cooling below 20 K. Remarkably, the temperature at which surface conduction dominates coincides with the temperature of the peak in R H (T). The temperature dependent resistance and Hall coefficient can be well fitted by a two-channel model with contributions from the metallic surface and the thermally activated bulk states. When the bulk of SmB 6 becomes metallic and magnetic at ~10 GPa, both the R H (T) peak and the resistance plateau disappear simultaneously. Here, our results indicate that the R H (T) peak is a fingerprint to diagnose the presence of a metallic surface state in SmB 6 . The high-pressure magnetic state of SmB 6 is robust to 180 GPa, and no evidence of superconductivity is observed in the metallic phase.
Focusing on the interface effect of the Ni{sub 80}Fe{sub 20} (Py)/terbium (Tb) bilayer, the influence of interface on the magnetization dynamic damping is investigated systematically. Two series of Py (12 nm)/Tb (d nm) films with and without copper (Cu) (1 nm) interlayer are deposited on silicon (Si) substrates by DC magnetron sputtering at room temperature. From vibrating sample magnetometer (VSM) measurements, the saturation magnetization (M{sub s}) decreases with increasing Tb thickness in Py/Tb bilayer while the decrease of M{sub s} is suppressed efficiently by inserting a Cu layer with even 1 nm of thickness. From the frequency dependence of ferromagnetic resonance (FMR) linewidth, we can obtain the Gilbert damping coefficient (α), α is found to exhibit an extreme enhancement in comparison to the single Py layer and shows an increasing trend with increasing Tb thickness. By inserting the Cu layer, α decreases significantly. From theoretical fitting, the spin diffusion length (λ{sub SD}) and spin mixing conductance (g{sup ↑↓}) are determined. It shows that the interface structure influences the spin mixing conductance but not the spin diffusion length.
The magnetic properties of Nd/Ni{sub 80}Fe{sub 20} (Py) bilayer films with different layer thicknesses were investigated. Hysteresis loops were measured at different temperatures, an exchange bias effect is found at low temperature due to the Nd/Py interface. By fitting the temperature dependence of the saturation magnetization, the Néel point of Nd layer is obtained. Ferromagnetic resonance (FMR) experiments were carried out at room temperature as a function of Nd layer thickness. The damping parameter obtained by theoretical fitting of the FMR linewidth shows an increasing trend with increasing Nd layer thickness, which is taken as an indication of the spin pumping effect.
The permalloy/rare-earth/permalloy trilayers with different types (Gd and Nd) and thicknesses of spacer layer are investigated using frequency dependence of ferromagnetic resonance (FMR) measurements at room temperature, which shows different behaviors with different rare earth spacer layers. By fitting the frequency dependence of the FMR resonance field and linewidth, we find that the in-plane uniaxial anisotropy retains its value for all samples, the perpendicular anisotropy remains almost unchanged for different thickness of Gd layer but the values are tailored by different thicknesses of Nd layer. The Gilbert damping is almost unchanged with different thicknesses of Gd; however, the Gilbert damping is significantly enhanced from 8.4×10{sup −3} to 20.1×10{sup −3} with 6 nm of Nd and then flatten out when the Nd thickness rises above 6 nm.
Not Available
The interface and magnetic properties of two series of films with Ta(5 nm)/Fe{sub 20}Ni{sub 80}Nd{sub 0.017}(3 nm)/Cu(t nm) and Ta(5 nm)/Cu(t nm)/Fe{sub 50}Co{sub 50}Gd{sub 0.07}(3 nm)/Cu(2 nm) structures have been investigated by atomic force microscopy, vibrating sample magnetometer, and ferromagnetic resonance (FMR). The roughness of all films increases with increasing copper thickness, which causes the different grain sizes in the surface of films. The coercivity of FeCo-Gd films increases with increasing thickness of inserted Cu layer while decreases with increasing thickness of Cu capping layer for FeNi-Nd films. FMR linewidth exhibits huge dependence on the thickness of inserted Cu layer for FeCo-Gd films, increasing from 2270 to 3680 Oe, which comes from the additional contribution of effect of the two-magnon scattering. And the thickness of Cu capping layer shows also an influence on FMR linewidth of FeNi-Nd films, increasing from 190 to 320 Oe, which mainly comes from intrinsic FMR linewidth and plus minor inhomogeneous broadening. All of these extrinsic linewidth broadening are related to the interface roughness.
The structural stability of cubic Ho{sub 2}O{sub 3} under high pressure has been investigated by angle-dispersive x-ray diffraction (ADXD) in a diamond anvil cell up to 63.0 GPa at room temperature. The diffraction data reveal two structural transformations on compression. The structural transformation from a cubic to a monoclinic structure starts at 8.9 GPa and is complete at 16.3 GPa with an {approx}8.1% volume collapse. A hexagonal phase begins to appear at {approx}14.8 GPa and becomes dominant at 26.4 GPa. This high-pressure hexagonal phase with a small amount of retained monoclinic phase is stable up to the highest pressure of 63.0 GPa in this study. After release of pressure, the hexagonal phase transforms to a monoclinic structure. A third-order Birch-Murnaghan fit yields zero pressure bulk moduli (B{sub 0}) of 206(3), 200(7) and 204(19) GPa and their pressure derivatives (B'{sub 0}) of 4.8(4), 2.1(4), 3.8(5) for the cubic, monoclinic and hexagonal phases, respectively. Comparing with other rare-earth sesquioxides, it is suggested that the transition pressure from cubic to monoclinic phase, as well as the bulk modulus of the cubic phase, increases with the decreasing of the cation radius of rare-earth sesquioxides.
High-pressure transformation and compression behavior of Gd{sub 2}O{sub 3} were investigated using synchrotron radiation x-ray diffraction in a diamond anvil cell up to 44 GPa at room temperature. The structural transformation from a cubic to a monoclinic phase occurred during the sample precompression process. Phase transitions from both the cubic and the monoclinic polymorphs to a hexagonal structure were observed. The hexagonal phase was stable up to the highest pressure in this study and was not quenchable and transformed to a monoclinic phase after pressure release. The bulk moduli of Gd{sub 2}O{sub 3} for the cubic, monoclinic, and hexagonal phases were obtained by fitting the compression data to the Birch-Murnaghan equation of state. Moreover, an anomaly of the hexagonal type Gd{sub 2}O{sub 3} was observed.