Search NASA⌕ Search

Engineering topics

Jiang, Yadong

Publications and source records attributed to Jiang, Yadong.

High-performance piezoelectric composites via β phase programming

Polymer-ceramic piezoelectric composites, combining high piezoelectricity and mechanical flexibility, have attracted increasing interest in both academia and industry. However, their piezoelectric activity is largely limited by intrinsically low crystallinity and weak spontaneous polarization. Here, we propose a Ti 3 C 2 T x MXene anchoring method to manipulate the intermolecular interactions within the all-trans conformation of a polymer matrix. Employing phase-field simulation and molecular dynamics calculations, we show that OH surface terminations on the Ti 3 C 2 T x nanosheets offer hydrogen bonding with the fluoropolymer matrix, leading to dipole alignment and enhanced net spontaneous polarization of the polymer-ceramic composites. We then translated this interfacial bonding strategy into electrospinning to boost the piezoelectric response of samarium doped Pb (Mg1/3Nb 2/3 )O 3 -PbTiO 3 /polyvinylidene fluoride composite nanofibers by 160% via Ti 3 C 2 T x nanosheets inclusion. With excellent piezoelectric and mechanical attributes, the as-electrospun piezoelectric nanofibers can be easily integrated into the conventional shoe insoles to form a foot sensor network for all-around gait patterns monitoring, walking habits identification and Metatarsalgi prognosis. This work utilizes the interfacial coupling mechanism of intermolecular anchoring as a strategy to develop high-performance piezoelectric composites for wearable electronics.

36 MATERIALS SCIENCE↗

Optimizing Piezoelectric Nanocomposites by High‐Throughput Phase‐Field Simulation and Machine Learning

Abstract Piezoelectric nanocomposites with oxide fillers in a polymer matrix combine the merit of high piezoelectric response of the oxides and flexibility as well as biocompatibility of the polymers. Understanding the role of the choice of materials and the filler‐matrix architecture is critical to achieving desired functionality of a composite towards applications in flexible electronics and energy harvest devices. Herein, a high‐throughput phase‐field simulation is conducted to systematically reveal the influence of morphology and spatial orientation of an oxide filler on the piezoelectric, mechanical, and dielectric properties of the piezoelectric nanocomposites. It is discovered that with a constant filler volume fraction, a composite composed of vertical pillars exhibits superior piezoelectric response and electromechanical coupling coefficient as compared to the other geometric configurations. An analytical regression is established from a linear regression‐based machine learning model, which can be employed to predict the performance of nanocomposites filled with oxides with a given set of piezoelectric coefficient, dielectric permittivity, and stiffness. This work not only sheds light on the fundamental mechanism of piezoelectric nanocomposites, but also offers a promising material design strategy for developing high‐performance polymer/inorganic oxide composite‐based wearable electronics.

42 ENGINEERING↗

Investigation on microstructures and phase transition characteristics of titanium/yttrium co-doped vanadium oxide thin films

Highlights: • Conjugated interaction between Ti{sup 4+} and Y{sup 3+} ions has been observed in Ti/Y codoped VO{sub 2} films. • The conjugated interaction causes the appearance of VO{sub 2} (B), even complete amorphization in Ti/Y co-doped VO{sub 2} thin film. • Ti/Y co-doping restrains the SMT feature of VO{sub 2} films. - Abstract: Co-doping with two elements has recently attracted attention as a novel approach for tailoring the semiconductor-metal transition (SMT) characteristics of vanadium dioxide (VO{sub 2}). Here, we investigate the influence of titanium/yttrium (Ti/Y) co-doping on the microstructure and SMT characteristics of VO{sub 2} thin films. At low Y concentration, Ti/Y co-doped VO{sub 2} thin films exhibit a monoclinic structure similar to VO{sub 2} but characterized by a smaller grain size, whereas, the VO{sub 2}(B) phase appears as the Y concentration is increased. Interestingly, even a complete amorphization of the film is obtained for co-doped VO{sub 2} thin films. The strong dependence of the microstructure upon the co-doping level is ascribed to the conjugated influence from the simultaneous adjustment of VV chains and VO bonds due to the existence of Ti{sup 4+} and Y{sup 3+} ions in VO{sub 2} lattice, respectively. As a result, the SMT feature of VO{sub 2} thin films is strongly limited or even fully disappears.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mid-infrared metasurface made of composite right/left-handed transmission-line

We report on the realization of a mid-infrared metasurface based on the concept of composite right/left-handed transmission-line. The metasurface consists of a three-layer metal-insulator-metal structure patterned into transmission-lines by electron-beam lithography. Angle-variable reflection spectroscopy measurements reveal resonant absorption features corresponding to both right- and left-handed propagations in the leaky-wave guided mode region. Material loss is shown to dominate the quality factor of the left-handed modes, while the radiative loss dominates the right-handed ones. The experimental results are in good agreement with full-wave numerical simulations and are explained with an equivalent circuit model.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polarization induced hole doping in graded Al{sub x}Ga{sub 1-x}N (x = 0.7 {approx} 1) layer grown by molecular beam epitaxy

Polarization induced hole doping on the order of {approx}10{sup 18} cm{sup -3} is achieved in linearly graded Al{sub x}Ga{sub 1-x}N (x = 0.7 {approx} 1) layer grown by molecular beam epitaxy. Graded Al{sub x}Ga{sub 1-x}N and conventional Al{sub 0.7}Ga{sub 0.3}N layers grown on AlN are beryllium (Be) doped via epitaxial growth. The hole concentration in graded Al{sub x}Ga{sub 1-x}N:Be (x = 0.7 {approx} 1) layers demonstrates that polarization generates hole charges from Be dopant. The Al{sub 0.7}Ga{sub 0.3}N layer is not conductive owing to the absence of carriers generated from the Be dopant without the inducement of polarization. Polarization doping provides an approach to high efficiency p-type doping in high Al composition AlGaN.

36 MATERIALS SCIENCE↗