Engineering topics
Publications and source records attributed to Jin, Zhaoyu.
Electrocatalytic nitrate reduction to ammonia offers a sustainable approach for nitrogenous waste upcycling. This review outlines recent advances in the design of electrocatalysts through cross-scale structural engineering.
Despite modern chemistry’s success in providing affordable fertilizers for feeding the population and supporting the ammonia industry, ineffective nitrogen management has led to pollution of water resources and air, contributing to climate change. Here, we report a multifunctional copper single-atom electrocatalyst-based aerogel (Cu SAA) that integrates the multiscale structure of coordinated single-atomic sites and 3D channel frameworks. The Cu SAA demonstrates an impressive faradaic efficiency of 87% for NH 3 synthesis, as well as remarkable sensing performance with detection limits of 0.15 ppm for NO 3 − and 1.19 ppm for NH 4 + . These multifunctional features enable precise control and conversion of nitrate to ammonia in the catalytic process, facilitating accurate regulation of the ammonium and nitrate ratios in fertilizers. We thus designed the Cu SAA into a smart and sustainable fertilizing system (SSFS), a prototype device for on-site automatic recycling of nutrients with precisely controlled nitrate/ammonium concentrations. The SSFS represents a forward step toward sustainable nutrient/waste recycling, thus permitting efficient nitrogen utilization of crops and mitigating pollutant emissions. This contribution exemplifies how electrocatalysis and nanotechnology can be potentially leveraged to enable sustainable agriculture.
Harvesting recyclable ammonia (NH 3 ) from the electrocatalytic reduction of nitrate (NO 3 RR) offers a sustainable strategy to close the ecological nitrogen cycle from nitration contamination in an energy-efficient and environmentally friendly manner. The emerging intermetallic single-atom alloys (ISAAs) are recognized to achieve the highest site density of single atoms by isolating contiguous metalatoms into single sites stabilized by another metal within the intermetallic structure, which holds promise to couple the catalytic benefits from intermetallic nanocrystals and single-atom catalysts for promoting NO 3 RR. Herein, ISAA In-Pd bimetallene, in which the Pd single atoms are isolated by surrounding In atoms, is reported to boost neutral NO 3 RR with a NH 3 Faradaic efficiency(FE) of 87.2%, a yield rate of 28.06 mg h -1 mg Pd -1 , and an exceptional electrocatalytic stability with increased activity/selectivity over 100 h and 20 cycles. The ISAA structure induces substantially diminished overlap of Pdd-orbitals and narrowed p-d hybridization of In-p and Pd-d states around the Fermi level, resulting in a stronger NO 3 - adsorption and a depressed energy barrier of the potential-determining step for NO 3 RR. Finally, further integrating the NO 3 RR catalyst into a Zn-NO 3 - flow battery as the cathode delivers a power density of 12.64 mW cm -2 and a FE of 93.4% for NH 3 production.
Single-atom catalysts (SACs) have aroused tremendous interest over the past decade, particularly in the community of energy and environment-related electrocatalysis. A rapidly growing number of recent publications have recognized it as a promising candidate with maximum atomic utilization, distinct activity, and selectivity in comparison to bulk catalysts and nanocatalysts. However, the complexity of localized coordination environments and the dispersion of isolated sites lead to significant difficulties when it comes to gaining insight into the intrinsic behavior of electrocatalytic reactions. Furthermore, the low metal loadings of most SACs make conventional ensemble measurements less likely to be accurate on the subnanoscale. Thus, it remains challenging to probe the activity and properties of individual atomic sites by available commercial instruments and analytical methods. In spite of this, continuing efforts have lately focused on the development of advanced measurement methodologies, which are very useful to the fundamental understanding of SACs. There have recently been a number of in situ/operando techniques applied to SACs, such as electron microscopy, spectroscopy, and other analysis methods, which support relevant functions to identify the active sites and reaction intermediates and to investigate the dynamic behavior of localized structures of the catalytic sites. This Account aims to present recent electrochemical probing techniques which can be used to identify single-atomic catalytic sites within solid supports. First, we describe the basic principles of molecular probe methods for the study and analysis of electrocatalytic site behavior. In particular, the in situ probing technique enabled by surface interrogation scanning electrochemical microscopy (SISECM) can measure the active site density and kinetic rate with high resolution. An alternative electrochemical probing technique is further demonstrated on the basis of single-entity electrochemistry, which allows the unique electrochemical imaging of the size and catalytic rate of single atoms, molecules, and clusters. Next, the merits and limitations of different electrochemical techniques are then discussed, along with perspectives for future prospects. Apart from this, we further showcase the powerful capability of emerging electrochemical probing techniques for determining significant effects and properties of SACs for various electrocatalytic reactions, including oxygen reduction and evolution, hydrogen evolution, and nitrate reduction. Overall, electrochemical techniques with atomic resolution have greatly increased opportunities for observing, measuring, and understanding the surface and interface chemistry during energy conversion. In the future, it is anticipated that the development of electrochemical probing techniques will be advanced with innovative perspectives on the behavior and features of SACs. We hope that this Account can contribute in several ways to promoting the fundamental knowledge and technical progress of emerging electrochemical measurements for studying SACs.
Ammonia (NH 3 ) is an essential ingredient in agriculture and a promising source of clean energy as a hydrogen carrier. The current major method for ammonia production, however, is the Haber–Bosch process that leads to massive energy consumption and severe environmental issues. Compared with nitrogen (N 2 ) reduction, electrochemical nitrate reduction reaction (NO 3 RR), with a higher NH 3 yield rate and Faradaic efficiency, holds promise for efficient NH 3 production under ambient conditions. To achieve efficient NO 3 RR, electrocatalysts should exhibit high selectivity and Faradaic efficiency with a high NH 3 yield rate. In this work, we developed two-dimensional (2D) iron-based cyano-coordination polymer nanosheets (Fe-cyano NSs) following in situ electrochemical treatment for high-rate NO 3 RR. Owing to the strong adsorption of nitrate on Fe0 active sites generated via topotactic conversion and in situ electroreduction, 2D Fe-cyano electrocatalyst exhibits high catalytic activity with a yield rate of 42.1 mg h –1 mgcat –1 and a Faradaic efficiency of over 90% toward NH 3 production at –0.5 V (vs reversible hydrogen electrode, RHE). Further electrochemical characterizations revealed that superhydrophilic surface and enhanced electrochemical surface area of the 2D porous nanostructures also contributed to the high-rate NO 3 RR activity. Finally, an electrolyzer toward NO 3 RR and oxygen evolution reaction (OER) in a two-electrode configuration is constructed based on 2D Fe-cyano, achieving an energy efficiency of 26.2%. This work provides an alternative methodology toward topotactic conversion of transition metal nanosheets for NO 3 RR and reveals the often-overlooked contribution of hydrophilicity of the catalysts for high-rate electrocatalysis.
Isolated Fe sites achieve enhanced intrinsic activity for nitrate electroreduction to ammonia with ∼100% selectivity, which effectively inhibit water dissociation through a nitrate-preoccupation mechanism.
Abstract A surface‐strained and geometry‐optimized TiO 2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti 3+ sites, demonstrating a more favorable pathway for the N 2 activation and selective NH 3 production with a faster kinetic rate than the pristine TiO 2 . The TiO 2 ‐based nanoreactor with surface and bulk structure tailoring delivered an NH 3 yield rate up to 5.50 μg h −1 cm −2 (16.67 μg h −1 mg cat −1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.
A surface-strained and geometry-optimized TiO 2 nanoreactor enhances the performance of electrocatalytic nitrogen fixation. The nanotubular confinement allows spatial regulation of the mass transport of nitrogen during the NRR process and offers an enlarged surface area, thus boosting the ammonia production with high selectivity. Both experimental and theoretical evidence support strained Ti 3+ sites, demonstrating a more favorable pathway for the N 2 activation and selective NH 3 production with a faster kinetic rate than the pristine TiO 2 . The TiO 2 -based nanoreactor with surface and bulk structure tailoring delivered an NH 3 yield rate up to 5.50 μg h -1 cm -2 (16.67 μg h -1 mg cat -1 ) and high faradaic efficiency of 26 % under ambient aqueous conditions. Furthermore, our findings highlight the concept of lattice strain and geometry modified nanoreactors, which will have broad implications in the renewable energy catalysis and electrosynthesis of valuable products.