Engineering topics
Publications and source records attributed to Jing, Haoyu.
Nine dyads composed of bacteriochlorins were prepared to investigate excited-state energy transfer (FRET) processes.
A new pentad array designed to exhibit panchromatic absorption and charge separation has been synthesized and characterized. The array is composed of a triad panchromatic absorber (a bis(perylene-monoimide)-porphyrin) to which are appended an electron acceptor (perylene-diimide) and an electron donor/hole acceptor (bacteriochlorin) in a crossbar arrangement. The motivation for incorporation of the bacteriochlorin versus a free-base or zinc chlorin utilized in prior constructs was to facilitate hole transfer to this terminal unit and thereby achieve a higher yield of charge separation across the array. The intense S 0 → S 1 (Q y ) band of the bacteriochlorin also enhances absorption in the near-infrared spectral region. Due to synthetic constraints, a phenylethyne linker was used to join the bacteriochlorin to the core porphyrin of the panchromatic triad rather than the diphenylethyne linker employed for the prior chlorin-containing pentads. Static and time-resolved photophysical studies reveal enhanced excited-state quenching for the pentad in benzonitrile and dimethyl sulfoxide compared to the prior chlorin-containing analogues. Success was only partial, however, as a long-lived charge separated state was not observed despite the improved energetics for the final ground-state hole/electron-shift reaction. The apparent reason is more facile competing charge-recombination due to the shorter bacteriochlorin – porphyrin linker that increases electronic coupling for this process. Furthermore, the studies highlight design criteria for balancing panchromatic absorption and long-lived charge separation in molecular architectures for solar-energy conversion.
A panchromatic triad and a charge-separation triad are joined in a crossbar architecture to capture solar energy. The panchromatic triad (T) is comprised of a central free-base porphyrin that is strongly coupled via direct ethyne linkages to two perylene-monoimides. Here, the charge-separation unit incorporates a free-base or zinc chlorin (C or ZnC) as a hole acceptor (or electron donor) and a perylene-diimide (PDI) as an electron acceptor, both attached to the porphyrin via diphenylethyne linkers. The free-base porphyrin is common to both light-harvesting and charge-separation motifs. The chlorin and PDI also function as ancillary light absorbers, complementing direct excitation of the panchromatic triad to produce the discrete lowest excited state of the array (T*). Attainment of full charge separation across the pentad entails two steps: (1) an initial excited-state hole/electron transfer process to oxidize the chlorin (and reduce the triad) or reduce the PDI (and oxidize the triad); and (2) subsequent ground-state electron/hole migration to produce oxidized chlorin and reduced PDI. Full charge separation for pentad ZnC-T-PDI to generate ZnC + -T-PDI¯ occurs with a quantum yield of ~30% and mean lifetime ~1 μs in dimethyl sulfoxide. For C-T-PDI, initial charge separation is followed by rapid charge recombination. The molecular designs and studies reported here reveal the challenges of balancing the demands for charge separation (linker length and composition, excited-state energies, redox potentials, and medium polarity) with the constraints for panchromatic absorption (strong electronic coupling of the porphyrin and two perylene-monoimide units) for integrated function in solar-energy conversion.
Here, the impact of vibrational–electronic resonances on the rate of excited-state energy transfer is examined in a set of bacteriochlorin dyads that employ the same phenylethyne linker. The donor/acceptor excited-state energy gap is tuned from ~200 to ~1100 cm –1 using peripheral substituents on the donor and acceptor bacteriochlorin macrocycles. Ultrafast energy transfer is observed with rate constants of (0.3 ps) –1 to (1.7 ps) –1 , which agree with those predicted by Förster theory to within a factor of 2. Furthermore, the measured rates follow a trend-line with only small deviations that do not correlate with the density of vibrations at the donor/acceptor excited-state energy gap. Thus, if vibrational–electronic resonances occur in any of these dyads, which seems likely, the impact on the rate of energy transfer is small.
A synthetic route to gem-dimethyl-substituted bacteriochlorins—models of native bacteriochlorophylls—relies on the formation of a dihydrodipyrrin precursor via a series of established reactions: van Leusen pyrrole formation, Vilsmeier formylation, Henry reaction, borohydride reduction, Michael addition, and McMurry–Melton pyrroline formation. The latter is the least known of the series. Here, the McMurry–Melton reaction of a 2-(6-oxo-2-nitrohexyl)pyrrole in the presence of TiCl3 and an ammonium acetate buffer formed the expected Δ1-pyrroline, as well as an unexpected polar, cyclic byproduct (a 5,6-dihydro-4H-1,2-oxazin-6-ol), each attached to the 2-methylpyrrole unit. Both species were characterized by single-crystal X-ray diffraction. The McMurry–Melton reaction is a type of intercepted Nef reaction (the transformation of a nitroalkyl motif into a carbonyl group), where both the Δ1-pyrroline and the dihydrooxazine derive from the reaction of the nitrogen derived from the nitro group upon complete or partial reductive deoxygenation, respectively, with the γ-keto group. The report also considers competing Nef and McMurry–Melton reactions, the nature of available TiCl3 reagents, and the use of ammonium acetate for buffering the TiCl3/HCl reagent.
Here, the ability to prepare and tailor synthetic analogues of native bacteriochlorophylls enables diverse applications. A de novo route entails dimerization of a dihydrodipyrrin-acetal to afford the corresponding 5-methoxy and/or 5-unsubstituted bacteriochlorin, wherein each pyrroline ring contains a gem-dimethyl group to ensure stability toward adventitious dehydrogenation. The presence of a 5-methoxy group facilitates bromination at the distal meso-(15-)position. While bromination of 5-unsubstituted bacteriochlorins typically affords a mixture of brominated products, here the presence of two substitution patterns (2,12-dicarboethoxy, 2,12-diacetyl) has been found to facilitate selective meso-bromination in the absence of the methoxy substituent. The introduction of a single meso-bromine atom in a bacteriochlorin opens opportunities for Pd-mediated derivatization, which include (1) preparation of four ethynylphenyl building blocks (and two benchmark bacteriochlorins) with long-wavelength absorption bands tuned across 725–757 nm, for use in preparation of multichromophore arrays; (2) installation of a bioconjugatable group to free base bacteriochlorins or a copper bacteriochlorin, the latter for possible use in photoacoustic imaging; and (3) installation of an S-acetylthio group for surface attachment. Altogether, 25 new bacteriochlorins are described including 5 meso-bromobacteriochlorin intermediates and 12 target bacteriochlorins.
Synthetic bacteriochlorins, analogues of native bacteriochlorophylls, provide absorption in the near-infrared spectral region and hence are valuable for fundamental studies in photochemistry and applications ranging from solar energy conversion to photomedicine. The full realization of such opportunities hinges on access to synthetically malleable bacteriochlorins. Here, two established routes that rely on self-condensation of a dihydrodipyrrin-acetal or dihydrodipyrrin-carboxaldehyde have been exploited to prepare 6 bacteriochlorins (2 new, 4 known in improved fashion). Each bacteriochlorin contains a gem-dimethyl group in the reduced, pyrroline ring to ensure stability toward adventitious dehydrogenation. These and related synthetic bacteriochlorins have been derivatized to tailor the perimeter of the macrocycle with diverse groups, affording 9 additional new bacteriochlorins and 4 known bacteriochlorins. By direct installation and/or derivatization, the scope of attached entities in this collection includes alkyl, amino, aryl, bromo, carboethoxy, oxo, phenylethynyl, and pyridyl. Furthermore, the bacteriochlorins are suited for surface attachment, bioconjugation, water-solubilization, vibrational studies, and elaboration into multichromophore arrays. Altogether the synthesis of 25 new compounds (11 bacteriochlorins, 14 precursors) is described.
Tetrapyrrole macrocycles are central to photosynthesis yet a single macrocycle does not carry out photosynthesis; rather, assemblies of tetrapyrrole macrocycles work in concert in antenna complexes, reaction centers, and electron-transport chains to harvest sunlight, funnel excited-state energy and separate charge for biological use. A longstanding theme in artificial photosynthesis has been to construct covalently linked “arrays” of metalated and free base tetrapyrrole macrocycles for fundamental studies of such processes, which entail excited-state and ground-state interactions. Among linkers in arrays chemistry, the 1,2-, 1,3-, or 1,4-disubstituted phenylene unit has proved very attractive owing to the resulting short distance, defined architecture, and appropriate extent of electronic coupling of adjacent macrocycles to give rapid electron and/or energy transfer while largely retaining desired spectral features. Eight distinct strategies to construct phenylene-linked tetrapyrrole arrays are identified in a review with comprehensive coverage since inception in the early 1970s through mid-year 2021. The arrays predominantly incorporate porphyrins with very few chlorins and bacteriochlorins, reflecting historic availability of synthetic methods for macrocycle formation. Of the eight strategies, only two appear applicable to (bacterio)chlorins. While studies in artificial photosynthesis have largely fueled this field, applications in catalysis have also been examined. Altogether >400 arrays are covered. The review delves into synthesis and molecular design, sketches photophysical properties, and suggests unrealized opportunities in arrays chemistry.