Search NASA⌕ Search

Engineering topics

John Hogan

Publications and source records attributed to John Hogan.

The Integrated Carbon Dioxide Removal, Compression, andStorage (CRCS) System

The Carbon Dioxide Removal, Compression, and Storage (CRCS) system was designed to remove carbondioxide (CO2(g)) from the spacecraft cabin atmosphere and compress and store the CO2(g) for furtherprocessing. Previous conference papers describe the hardware design and functional testing of the single anddual beds. This paper discusses the integrated system test results when dry CO2(g) latent air (2600ppm CO2(g))enters the system at 30 SCFM.

air revitalization↗

BioNutrients-1: Development of an On-Demand Nutrient Production System for Long-Duration Missions

Future long-duration missions beyond low-Earth orbit will require advances in food technologies to address the documented problem of degradation of vitamins and nutrients in supplied foods stored long-term. To begin to address the issue of nutrient degradation, we are developing and flight-testing a platform biomanufacturing technology for in situ production of target nutrients. This technology is being tested over a five-year duration on the International Space Station (ISS). As part of the BioNutrients-1 project we have developed an on-demand system for the production of two carotenoids, β-carotene and zeaxanthin, by genetically engineering distinct strains of Saccharomyces cerevisiae, more commonly known as baker’s yeast. The on-orbit nutrient production packs contain a desiccated yeast strain and edible growth substrate. Once hydrated, the contents of the production packs are intended to grow and produce a desired amount of ready-to-consume nutrients. In this current version the production packs will not be consumed and future missions will require an inactivation of microorganisms before consumption. In addition to the on-orbit hydration of the production packs a series of valuable microorganisms are currently being stored in stasis packs on the ISS including probiotics organisms, bacterial strains used in yogurt production, and organisms with potential use for future biomanufacturing. Analysis of returned ISS stasis packs and ground controls will include multi-omics studies and provide insight into long-term survival of organisms stored in a space environment. Both stasis packs and hydrated production packs will be intermittently returned to Earth for analysis. Preliminary data from long-term storage studies of stasis packs stored on the ISS for 47 days versus their ground control counterparts have shown no significant difference in viability. Currently no production packs have been processed.

Yeast↗

Bioreactor Development for CO2-Based In Situ Resource Utilization Manufacturing

Sustainable long-duration manned missions on both the Moon and Mars will require in situ resource utilization (ISRU). Carbon dioxide (CO2) has great potential as a harvestable resource, making up 95% of the atmosphere on Mars and being produced as respiratory waste in spacecraft and future planetary habitats. Through ISRU, biomanufacturing has the capability to produce a near limitless array of products from local space resources, which include pharmaceuticals, bioplastics, chemical feedstocks, and industrial enzymes. Here, a CO2-based ISRU recombinant protein bioreactor and associated biomanufacturing organisms were designed to produce a highly stable carbonic anhydrase (CA). Initial work characterized candidate organisms for growth on acetate and formic acid, carbon substrates that can be synthesized via electrochemical conversion of CO2. To improve growth on the CO2 producing substrate formic acid and for direct integration of ISRU CO2, a synthetic Calvin-Benson-Bassam cycle was designed for use in Cyberlindnera jadinii and Escherichia coli. Genetic modifications in E. coli will be facilitated by a tailored CRISPR/Cas9 and λ red recombineering two-vector system. For expression of CA, a blue light regulated T7 promoter was employed for dynamic and small molecule free induction. Efficient bioproduction through a fed-batch exponential feeding strategy was determined via mass balance calculations from ISRU substrates to biomass and CA yield. Flux balance analysis was used to model ISRU substrate metabolism and metabolic pathway engineering in candidate organisms under cultivation strategy conditions for both metabolism reconstruction and pathway design optimization. Finally, a small-scale, disposable bag bioreactor concept for use in the NASA Bioculture System infrastructure was designed to enable CO2-based CA production in reduced-gravity environments.

Biomanufacturing, Pathway Engineering, Flux Balanc↗

Synthetic Biology Applications

This AES project has been transferred to the NASA Space Technology Mission Directorate (STMD) as of September, 2020.

John Hogan↗

Bioreactor Development for CO2-Based In Situ Resource Utilization Manufacturing

Sustainable long-duration manned missions on both the Moon and Mars will require in situ resource utilization (ISRU). Carbon dioxide (CO2) has great potential as a harvestable resource, making up 95% of the atmosphere on Mars and being produced as respiratory waste in spacecraft and future planetary habitats. Through ISRU, biomanufacturing has the capability to produce a near limitless array of products from local space resources. Here, a CO2-based ISRU recombinant protein producing bioreactor and associated biomanufacturing organisms were designed to produce a highly stable carbonic anhydrase (CA). Candidate organisms were selected by growth characterization on acetate and formic acid, carbon substrates that are synthesized via electrochemical conversion of CO2. To improve growth on the CO2 producing substrate formic acid and for direct integration of ISRU CO2, a synthetic Calvin-Benson-Bassam cycle was designed for use in Escherichia coli. Multiplex genetic modification in E. coli was facilitated by a tailored CRISPR/Cas9 and λ red recombineering two-vector system. For expression of CA, a blue light regulated T7 promoter was employed for dynamic and small molecule free induction. Efficient bioproduction through a fed-batch exponential feeding strategy was determined via mass balance analysis from ISRU substrates to biomass and CA yield. Flux balance analysis was used to model ISRU substrate metabolism and metabolic pathway engineering in candidate organisms under cultivation strategy conditions for both metabolism reconstruction and pathway design optimization. Finally, a small-scale, disposable bag bioreactor for use in the NASA Bioculture System infrastructure was designed to enable CO2-based CA biomanufacturing in reduced-gravity environments.

biomanufacturing↗

BioNutrients: Microbial on-demand production of short shelf-life micronutrients in space

Long duration deep space missions pose a significant challenge when considering adequate nutrition for human spaceflight. Many micronutrients supplied in pre-packaged foods for low Earth orbit flights have a short shelf life and will degrade over multi-year missions. One strategy to mitigate the risk of micronutrient malnutrition is to grow fresh foods to supplement a pre-packaged diet. The BioNutrients project aims to develop systems for growing edible microorganisms that are genetically engineered to produce short shelf life micronutrients. BioNutrients-1 (BN-1) is a five-year spaceflight project currently underway on the International Space Station (ISS) that tests long-term storage and production of two carotenoids, β-carotene and zeaxanthin, in genetically engineered yeast strains. BN-1 on-orbit and ground control activities indicate that the nutrient production system will be stable for at least two years in ambient storage conditions. BN-1 is also testing the effects of long-term ISS storage on viability and gene expression using “stasis packs” containing a series of microorganisms useful in food and biomanufacturing processes. Stasis pack analysis is distinguishing microorganisms with full viability after two years of storage from other species that lose viability rapidly. In parallel, BioNutrients-2 (BN-2) is being developed as a six-month flight experiment that will expand the range of foods produced on ISS to include yogurt, kefir, and probiotic yeast. BN-2 will improve upon hardware design by transitioning from a hard-shell polycarbonate bioreactor to a flexible fluorinated ethylene propylene (FEP) bag. This change reduces the mass and volume required to store production packs. The long-term goal of BioNutrients is to develop the capability for rapid and safe delivery of multiple micronutrients in single-use production packs. We expect synthetic biology approaches similar to BioNutrients will play an important role for astronaut health in future NASA missions to the Moon and Mars.

Synthetic Biology↗

Microbial Factories for Solar System Exploration

As humans venture deeper into space for longer duration missions, resupply missions become far more difficult and costly. To address this, alternative methods of in situ biomanufacturing can be developed to provide a reliable source of required nutrients. BioNutrients is an ongoing project including three separate flight experiments that aims to provide on-demand nutrient production through 5-year shelf stable microbial factories for astronauts on long-duration missions. The BioNutrients-3 (BN-3) flight experiment aims to demonstrate on-orbit food safety, user-friendly production pack design, and multi-compound production capability. This current study seeks to support the multiple compound production element of BN-3 by investigating the production of multiple compounds via multiple pathways in one organism. An experiment has been designed to modify an existing strain of Saccharomyces boulardii designed by the BioNutrients team to efficiently produce β-carotene to also efficiently produce a second nutrient, riboflavin. This experiment entails the random shuffling and recombination of gene elements including promoters and terminators of various strengths to identify optimal combinations for the upregulation of the riboflavin production pathway. Implementation of this experiment would provide insight into the efficiency of the multiple pathways production method and pave the way for additional fine tuning of the riboflavin production pathway and additional nutrient production pathways in S. boulardii.

Biomanufacturing↗

Preliminary Design of a Downstream Processing System for Protein Production in Space

Biomanufacturing is a promising technology to convert in situ resources into essential products including enzymes, therapeutics, biopolymers and other chemicals required to support deep-space missions that may not be easily supplied or produced by alternative means. In addition to the biomass production operations, vital down-stream steps including biomass harvesting/concentration, cell lysis, protein capture and purification are needed to produce an application-ready product. Commercially available terrestrial processes commonly require complex, heavy equipment and highly trained operators, which are not practical in deep space environments. In this work, we aim to identify approaches required to produce an intracellular, His-tagged recombinant enzyme using E. coli at 1 L production scales within the constraints of a deep-space mission as a model use-case scenario. Based on extensive literature review and commercially available products, we identified candidate technologies and products that could be integrated for deep space biomanufacturing. Different preliminary designs were then compared in terms of total system impacts on up-mass, processing time, and consumables required. Our analysis indicated that a biomass concentrator would significantly reduce the processing time and consumables required for the overall system without a large increase in the total mass. We also identified viable technologies for other steps such as cell lysis and protein purification. Predictions from our trade study will be validated in the laboratory by testing the most promising products with the results used to optimize the design. This research will help transfer technology that is well developed on Earth to a space-ready format to produce biological products from a wide variety of microorganisms that can support deep-space missions.

Biomanufacturing↗

Bionutrients: Microbial Production of on-Demand Nutrients on the International Space Station

Providing adequate nutrition to crew members is essential as deep-space missions cannot rely on consistent Earth-based resupply. The current NASA pre-packaged food system is designed for low-earth-orbit missions with a stated shelf-life of two years and notable vitamin degradation over time. One strategy to mitigate nutrient loss is to implement bioregenerative food sources to supplement the pre-packaged food system. The BioNutrients project is designed to provide targeted production of short shelf-life nutrients in a single-use production pack. BioNutrients-1 includes two strains of edible yeast that have been genetically engineered to produce carotenoids, β-carotene, and zeaxanthin. This five-year mission on the International Space Station (ISS), launched in 2019, tests the long-term storage and nutrient production of the microorganisms of interest. Additional microorganisms are also stored in stasis packs to determine the effects of long-duration storage on the ISS. These organisms may be useful for production of fermented foods, pharmaceuticals, or biomanufacturing processes. Improving on the BioNutrients-1 project, BioNutrients-2 has optimized the production pack hardware by reducing the overall mass and volume of the system. Furthermore, BioNutrients-2 has expanded the projects scope by investigating novel products and microbial food sources. BioNutrients-2 is a six-month mission, launched in 2022, which tests production of fresh foods such as yogurt and kefir. The BioNutrients missions seek to provide advances for in-space biomanufacturing by addressing safe and reliable production of high-value nutrients and on-demand foods for future exploration efforts.

BioNutrients↗

Bionutrients: Microbial Production of on-Demand Nutrients on the International Space Station

Providing adequate nutrition to crew members is essential as deep-space missions cannot rely on consistent Earth-based resupply. The current NASA pre-packaged food system is designed for low-earth-orbit missions with a stated shelf-life of two years and notable vitamin degradation over time. One strategy to mitigate nutrient loss is to implement bioregenerative food sources to supplement the pre-packaged food system. The BioNutrients project is designed to provide targeted production of short shelf-life nutrients in a single-use production pack. BioNutrients-1 includes two strains of edible yeast that have been genetically engineered to produce carotenoids, β-carotene, and zeaxanthin. This five-year mission on the International Space Station (ISS), launched in 2019, tests the long-term storage and nutrient production of the microorganisms of interest. Additional microorganisms are also stored in stasis packs to determine the effects of long-duration storage on the ISS. These organisms may be useful for production of fermented foods, pharmaceuticals, or biomanufacturing processes. Improving on the BioNutrients-1 project, BioNutrients-2 has optimized the production pack hardware by reducing the overall mass and volume of the system. Furthermore, BioNutrients-2 has expanded the projects scope by investigating novel products and microbial food sources. BioNutrients-2 is a six-month mission, launched in 2022, which tests production of fresh foods such as yogurt and kefir. The BioNutrients missions seek to provide advances for in-space biomanufacturing by addressing safe and reliable production of high-value nutrients and on-demand foods for future exploration efforts.

BioNutrients↗

Benchmarking Computational Tools for Calling SNPs and Indels in Complex Microbial Populations

The NASA BioNutrients missions seek to understand the suitability of microorganisms for bioproduction during space flight. One topic of interest is the stability of microbial genomes during long-term ambient storage and subsequent rehydration and growth. To address these questions, samples from 8 species were flown to ISS for 5 years of desiccated storage at ambient temperature (Stasis Packs) and 2 species were packaged along with powdered media inside a bioreactor system to allow hydration and growth in microgravity (Production Packs). For both systems, Whole Genome Sequencing (WGS) of the DNA extracted from the returned samples and paired ground controls will be conducted to identify changes in genome stability due to time, storage conditions and growth in space. Across the technical replicates, ground controls, 10 timepoints, and multiple experimental conditions, ~300 samples have been selected for initial analysis with WGS sequencing to 100x coverage. A flexible and resource efficient mutation calling pipeline is needed to process this large dataset and allow for comparisons between species. Many bioinformatics tools for calling Indels and Single Nucleotide Variants (SNVs) are designed for use with pure isolates, where true variations from the reference genome are expected to dominate the reads aligning to the location of mutation. In contrast, DNA from the Stasis Pack (SP) samples was collected directly after recovery from desiccated storage and the Production Pack (PP) samples were collected after fermentation. In this context, reads with mutations are expected to be less frequent than reads that align with the reference genome, as each sample will include multiple lines of cells. Thus, BioNutrients samples are expected to be similar to samples from cancer cell or “pooled” sequencing approaches. In preparation for the analysis of the BioNutrients samples, we have tested three mutation calling tools (GATK for Microbes, BreSeq and DiscoSNP) designed for complex samples. A challenge of validating mutation identification pipelines is a lack of “Ground Truth” datasets, especially for complex samples. To compare these three tools, we sought to identify mutations in pre-existing WGS data collected from populations of Chlamydomonas reinhardtii that were exposed to UV mutagenesis and growth in LEO as part of the Space Algae-1 mission. Here we present a summary of these tools against the analysis originally conducted using the CRISP tool. Critical metrics are compared such as runtime, the number of SNPs, the number and size of Indels, and patterns of transversion and transitions identified by each tool are reported. By sharing these benchmarking results collected in support of the BioNutrients mission, we aim to guide others seeking to identify SNVs in similarly complex microbial samples.

Biology↗

Developing a Genetic Variant Calling Pipeline for Quantifying the Complex Mutagenic Load Accumulated in BioNutrients-1 Production Pack Samples

Microorganisms hold great promise for on demand production of labile nutrients and pharmaceuticals as well recycling and in situ resource utilization. The utilization of microorganisms for such tasks on space missions is hindered by the limited data on how microbes respond to spaceflight. For example, the genetic stability of microorganisms, and the genomic engineered traits added to deliver desired functions, over long-term storage in the spacecraft environment is poorly understood. The BioNutrients-1 (BN-1) mission conducted a 5-year study of desiccated storage in Low Earth Orbit (LEO) to evaluate the suitability of eight synthetic biology chassis organisms for long-duration space missions. We are employing high-depth, whole genome sequencing (WGS) to determine the mutagenic load that accumulated during long-term storage. Mutation analysis pipelines are well established for homogenous culture grown from a single colony, but the mutational landscape of the BN-1 samples present a unique analysis challenge, as every cell in the BN-1 samples had a unique genetic journey of DNA damage and repair. Consequently, sequence variants are expected at low allele frequency within samples. To address this genetic complexity, we apply two distinct computational approaches to identify mutations in pre-existing WGS data collected from populations of Chlamydomonas reinhardtii that were exposed to UV mutagenesis and growth in LEO. For reference genome free mutation detection, we utilized DiscoSNP++, which is a de Bruijn graph approach. For reference genome-based mutation detection we utilize GATK for Microbes, which is a Bayesian probabilistic approach. We will benchmark these approaches against the mutations originally identified using CRISP, a method optimized for pooled samples. Ultimately, quantifying the mutation load imposed by storage or growth on the ISS will help identify chassis organisms with both high levels of genome stability and viability, which are desirable traits for implementation of bioproduction in long-duration missions.

SNP↗

Bionutrients-1: Utilizing Genomics and Transcriptomics to Assess the Reliability of Microorganisms for In Situ Nutrient Production on Long Duration Missions

The resupply of current long-duration crewed missions to the ISS relies on ground-launched supplies. As NASA looks toward Mars, ground-based resupply will no longer be an option. Critical nutrients, including vitamin C, vitamin K, folate, and thiamin, degrade during long-term storage, and regular consumption of these nutrients is essential for astronaut health. Another challenge of current food systems is the difficulty of consuming sufficient calories when subsisting on the limited flavors of freeze-dried food, which can lead to weight loss. The inclusion of microorganism-based food systems could alleviate both concerns. For example, the fermentation of rehydrated milk into yogurt with microorganisms genetically incorporating genes to produce critical vitamins would allow for both in situ production of nutrients and a fresh food product with additional flavor profiles. In comparison to plant food production, microorganisms require less flight infrastructure. The BioNutrients-1 mission is demonstrating viability of microbial fermentation food production in microgravity and testing the reliability of this approach for long-duration missions lacking resupply. While the BioNutrients-1 mission includes the collection of multiple phenotypic measurements, this status update will focus on the processing of samples for genomics and transcriptomics analyses as well as the planned analysis pipelines. First, the BioNutrients-1 mission seeks to identify microorganisms capable of surviving long-duration storage at ambient temperatures while maintaining genetic fidelity. To achieve this, nine commonly employed microbial species were stored at ambient temperatures in Stasis Packs on the ISS for five years. The viability and mutation rates will be measured at multiple time points for both flown and ground control samples. From an omics perspective, the changes in the bulk rates of point mutations and genetic rearrangements across the Stasis Pack species during the five years of storage will be determined, providing valuable insights into the potential of these microorganisms for long-duration space missions. Second, the BioNutrients-1 mission is characterizing the impact of microgravity on fermentation. Two strains of the yeast Saccharomyces cerevisiae, each encoding antioxidants (β-carotene or zeaxanthin) were flown to ISS for storage and fermentation within simplified bioreactors (Production Packs). The impact of microgravity on the expression of the antioxidant production genes and general metabolic genes will be determined using RNA sequencing. Ultimately, the transcriptome data will be compared to phenotypic measurements, such as the antioxidant yield, end-state biomass, and the production of EtOH, to determine the impacts of microgravity and long-term storage on microbial fermentation. The findings from this research will be instrumental in understanding the challenges and opportunities of microorganism-based food systems in space missions.

BioNutrients↗