How Do Self-Interaction Errors Associated with Stretched Bonds Affect Barrier Height Predictions?
Not Available
Engineering topics
Publications and source records attributed to Johnson, J. Karl.
Not Available
Density functional theory (DFT)-based descriptions of the adsorption of small molecules on transition metal ions are prone to self-interaction errors. Here, we show that such errors lead to a large over-estimation of adsorption energies of small molecules on Cu + , Zn + , Zn 2+ , and Mn + in local spin density approximation (LSDA) and Perdew, Burke, Ernzerhof (PBE) generalized gradient approximation calculations compared to reference values computed using the coupled-cluster with single, doubles, and perturbative triple excitations method. These errors are significantly reduced by removing self-interaction using the Perdew–Zunger self-interaction correction (PZ-SIC) in the Fermi–Löwdin Orbital (FLO) SIC framework. In the case of FLO-PBE, typical errors are reduced to less than 0.1 eV. Furthermore, analysis of the results using DFT energies evaluated on self-interaction-corrected densities [DFT(@FLO)] indicates that the density-driven contributions to the FLO-DFT adsorption energy corrections are roughly the same size in DFT = LSDA and PBE, but the total corrections due to removing self-interaction are larger in LSDA.
We study the effect of self-interaction errors on the barrier heights of chemical reactions. For this purpose we use the well-known Perdew-Zunger [J. P. Perdew and A. Zunger, Phys. Rev. B,23, 5048 (1981)] self-interaction-correction(PZSIC), as well two variations of the recently developed, locally scaled self-interaction correction (LSIC) [Zope et al.,J. Chem. Phys.151, 214108 (2019)] to study the barrier heights of the BH76 benchmark dataset. Our results show that both PZSIC and especially the LSIC methods improve the barrier heights relative to the local density approximation(LDA). The version of LSIC that uses the iso-orbital indicator z as a scaling factor gives a more consistent improvement than an alternative version that uses an orbital-dependent factor based on the ratio of orbital densities to the total electron density. We show that LDA energies evaluated using the self-consistent and self-interaction-free PZSIC densities can be used to assess density-driven errors. Furthermore, the LDA reaction barrier errors for the BH76 set are found to contain significant density-driven errors for all types of reactions contained in the set, but the corrections due to adding SIC to the functional are much larger than those stemming from the density for the hydrogen transfer reactions and of roughy equal size for the non-hydrogen transfer reactions.
Not provided.
Tailorable multicomponent MOFs and MOF membranes for efficient H 2 /CO 2 separation.
Density functional theory (DFT)-based methods often significantly underpredict chemical reaction barriers compared with experiments because of the tendency of DFT to over-stabilize transition states with stretched bonds due to the impact of unphysical electron self-interaction. But many reactions have early or late transition states where the transition state geometry closely resembles the reactants or products, respectively. The role of self-interaction in those cases is not known. Here we compare the performance of DFT with and without self-interaction correction (SIC) for describing the hydrogenation of CO and CO 2 catalyzed by a Lewis acid-base pair incorporated onto an aromatic cluster, using CCSD(T) results for reference. The three elementary steps in these reactions consist of an early, a middle, and a late transition. Our results show that the Perdew-Zunger SIC (PZ-SIC), implemented in the Fermi-L Lowdin orbital SIC (FLO-SIC) approach, qualitatively improves the description of the forward and reverse reaction barriers relative to uncorrected DFT for the middle transition, but not the early or late transitions. By contrast, the local scaling SIC (LSIC) method, also implemented in the FLO-SIC framework, significantly improves the calculated barriers over DFT and PZ-SIC in all but one case. Lastly, the results also show how the FLO-SIC approach can provide insight into the bonding in aromatic systems.
Metal organic frameworks (MOFs) having open metal sites have the potential to approach the activity of homogeneous organometallic complexes, thus combining the advantages of homogeneous and heterogeneous catalysis. We pre-sent a fundamental study of the effectiveness of incorporating open metal sites into MOFs. We have modeled the binding of a series of adsorbates in a Cu(I) substituted MOF, Cu(I)-MFU-4l using density functional theory, and compared the activity of the Cu(I) sites in Cu(I)-MFU-4l with two different Cu(I) scorpionate complexes. The computational results confirm the single-site nature of the Cu(I) active site. This is further supported by complementary experiments to measure the chemisorption uptake inside our synthesized samples in order to estimate the amount of active Cu sites present. We observed a level of chemisorption that is roughly half the theoretical maximum, which implies that only half of the Cu atoms incorporated into MFU-4l via metal-ion exchange are able to act as binding sites. We speculate that the inactive Cu atoms are coordinately saturated Cu(II) sites. Furthermore, our work suggests that the performance of Cu(I)-MFU-4l could be significantly increased by optimizing the metal exchange and activation processes.
Incorporating open metal sites (OMS) into metal–organic frameworks allows design of well-defined binding sites for selective molecular adsorption, which has a profound impact on catalysis and separations. We demonstrate that Cu(I) sites incorporated into MFU- 4 l preferentially adsorb olefins over paraffins. Density functional theory (DFT) calculations show that the OMS are independent, with no dependence of binding energy on olefin loading up to one olefin per Cu(I). Experimentally, increasing Cu(I) loading increased olefin uptake without affecting the binding energy, as predicted by DFT and confirmed by temperature-programmed desorption. The potential of this material for olefin/paraffin separation under ambient conditions was investigated by gas adsorption and column breakthrough experiments for an equimolar ratio of olefin/paraffin. High-grade propylene and ethylene (>99.999%) can be generated using temperature–concentration swing recycling from a Cu(I)-MFU-4l packed column with no measurable paraffin breakthrough.
Formaldehyde (CH 2 O) is a highly versatile platform chemical with an annual production of over 30 megatons. The current most widely used industrial method for formaldehyde synthesis is very energy intensive and plagued with significant exergy losses. We propose a highly efficient heterogeneous nanoporous catalyst capable of direct hydrogenation of CO to CH 2 O followed by condensation of CH 2 O from a mixture of CO and H 2 , which are non-condensable gases. The key to this synthesis is a Lewis Pair (LP) functionalized metal-organic framework (MOF) heterogeneous porous catalyst. We have computed reaction pathways, barriers, and uncertainties for CO hydrogenation on a LP functionalized MOF using various density functional theory (DFT) methods and high-level ab initio methods. We have assessed the uncertainties in the energetics inherent in the DFT functionals. Here, we predict that the thermodynamics of CH 2 O synthesis will be enhanced relative to gas phase synthesis and more importantly, will not be equilibrium limited because the barrier to product desorption from the MOF is much lower than the barrier for the reverse reaction. Hence, the product will be continuously removed from the process, facilitating very high overall conversion rates. Our proposed process will dramatically improve the sustainability of CH 2 O synthesis.
The self-interaction error (SIE) is one of the major drawbacks of practical exchange-correlation functionals for Kohn-Sham density functional theory. Despite this, the use of methods that explicitly remove SIE from approximate density functionals is scarce in the literature due to their relatively high computational cost and lack of consistent improvement over standard modern functionals. Here, we assess the performance of a novel approach recently proposed by Pederson, Ruzsinszky, and Perdew for performing self-interaction free calculations in density functional theory based on Fermi-orbitals. To this end, we employ test sets consisting of reaction energies that are considered particularly sensitive to SIE. We found that the parameter-free Fermi-Löwdin orbital self-interaction correction method combined with standard local spin density approximation (LSDA) and Perdew-Burke-Ernzerhof (PBE) functionals gives a much better estimate of reaction energies compared to their parent LSDA and PBE functionals for most of the reactions in these two sets. They also perform on par with the global PBE0 and range-separated LC-ωPBE hybrids, which partially eliminate the SIE by including Hartree-Fock exchange. This shows the potential of the Fermi-Löwdin orbital self-interaction corrected (FLOSIC) method for practical density functional calculations without SIE.
We have used density functional theory and classical grand canonical Monte Carlo simulations to identify two functionalized metal organic frameworks (MOFs) that have the potential to be used for both CO 2 capture from flue gas and catalytic conversion of CO 2 to valuable chemicals. These new materials based on MIL-140B and MIL-140C functionalized with Lewis pair (acid and base) moieties, which are integrated into the framework linkers. In this work, we show that the Lewis pair functional groups are capable of catalyzing heterolytic dissociation of H 2 and subsequent hydrogenation of CO 2 through concerted 2-H addition. We have examined the effect of pore size and framework topology on the competitive binding of H 2 and CO 2 . We show that the small pore size of functionalized MIL-140B stabilizes the formation of a pre-activated CO 2 species and that this pre-activated CO 2 has a lower overall reaction barrier for hydrogenation of CO 2 to formic acid than a competing pathway in the same material that does not go through a pre-activated complex. We demonstrate that steric hindrance can potentially break energy scaling relationships, which limit the ability to optimize traditional heterogeneous catalysts, by independently changing one part of the CO 2 hydrogenation pathway, without negatively impacting other parts of the pathway. Specifically, we show that steric effects can reduce the CO 2 hydrogenation barrier without impacting the H 2 dissociation barrier or binding energy.
Computer-aided screening methods facilitate the discovery of new extractants for heavy and rare-earth metal separations. In this work, we have benchmarked the accuracy of different quantum chemistry methods for calculating extractant binding energies and selectivities. Specifically, we compare calculated data from different exchange correlation functionals (B3LYP-D3, ωB97X-D3, and M06-L) and different basis sets (including large-core effective core potentials and all-electron basis sets). We report aqueous-phase binding energy and selectivity trends for 1:1 and 3:1 extractant/lanthanide models for the complexes. We find that binding selectivities are not particularly sensitive to model chemistry, but binding energies are sensitive. Furthermore, calculated trends in selectivity using 3:1 extractant/lanthanide models are in better agreement with available experimental trends than trends using 1:1 extractant/lanthanide models. Lastly, we find that the B3LYP-D3/6-31 + G* model chemistry with the Stuttgart large-core relativistic effective core potentials on the lanthanide sufficiently reproduces results from larger basis set calculations and is confirmed as suitable for relatively fast and efficient screening of lanthanide binding energies and selectivities.
The objective of this project is to develop novel nanoporous materials for CO 2 capture and conversion. The motivation of this work is that capture of CO 2 from flue gas or the atmosphere coupled with catalytic hydrogenation of CO 2 into valuable chemicals and fuels can reduce the net amount of CO 2 in the atmosphere while providing liquid transportation fuels and other commodity chemicals. One approach to increasing the economic viability of carbon capture and conversion is to design a single material that can be used for both the capture and catalytic conversion of CO 2 , because such a material could increase efficiency through process intensification. We have used density functional theory (DFT) methods to design catalytic moieties that can be incorporated into various metal organic framework (MOF) materials. We chose to work with MOFs because they are highly tailorable, can be functionalized, and have been shown to selectively adsorb CO 2 over N 2 , which is a requirement for CO 2 capture from flue gas. Moreover, the incorporation of molecular catalytic moieties into MOF, through covalent bonding, produces a heterogeneous catalytic material having activities and selectivities close to those of homogeneous catalysts, but without the draw-backs associated with homogeneous catalysis.
Explore the source record for details and available documents.
Explore the source record for details and available documents.
First-principles calculations are performed to investigate the adsorption of hydrogen onto Li-decorated hybrid boron nitride and graphene domains of (BN){sub x}C{sub 1−x} complexes with x = 1, 0.25, 0.5, 0.75, 0, and B{sub 0.125}C{sub 0.875}. The most stable adsorption sites for the nth hydrogen molecule in the lithium-decorated (BN){sub x}C{sub 1−x} complexes are systematically discussed. The most stable adsorption sites were affected by the charge localization, and the hydrogen molecules were favorably located above the C-C bonds beside the Li atom. The results show that the nitrogen atoms in the substrate planes could increase the hybridization between the 2p orbitals of Li and the orbitals of H{sub 2}. The results revealed that the (BN){sub x}C{sub 1−x} complexes not only have good thermal stability but they also exhibit a high hydrogen storage of 8.7% because of their dehydrogenation ability.