Johnson, Lee K. | Search NASA

NASA NTRS2020

Collisional-Radiative Models of Neutral and Singly-Ionized Xenon in Hall Thrusters: Experimental Validation and Model Investigations

The recently developed collisional radiative (CR) models for neutral xenon (Xe I) and singly charged xenon ion (Xe II) described by Chaplin et al. in the paper "Insights from Collisional-Radiative Models of Neutral and Singly-Ionized Xenon in Hall Thrusters" also submitted to the 2021 AIAA Propulsion and Energy Forum are more thoroughly investigated. Comparisons between the existing and recently developed JPL Xe I CR models are done and reasons for discrepancies between the two models are explored. An experiment to validate the Xe II CR model is carried out in the anode region of the UCLA Plasma interactions facility. The Xe II CR model is applied to measured xenon ion emission line intensities to determine electron temperature and density. Spatial resolution of these optical measurements is obtained through an Abel inversion for direct comparison to Langmuir probe results. Although the measured electron densities were on the order of $10^{17}$ m$^{-3}$ and the Xe II CR model is most suitable for use with densities above $10^{18}$ m$^{-3}$ due to the strong dependence of the line ratios on electron temperature in that regime, initial results from the validation experiment show reasonable agreements between the optical and Langmuir probe results. The 441 nm to 605 nm line ratio appears to have the most promise for non-intrusive electron temperature measurements with the Xe II CR model. Shortcomings of the Xe II CR model revealed in the validation experiment are to be explored further.

Lobbia, Robert B.↗

NASA NTRS2006

Effects of an internally-mounted cathode on hall thruster plume properties

The effects of cathode position on the plume properties of an 8 kW BHT-8000 Busek Hall thruster are discussed. Experiments were conducted at the Jet Propulsion Laboratory (JPL) in a vacuum chamber suitable for the development and qualification of high-power Hall thrusters. Multi-mode Hall thruster operation was demonstrated at operating conditions ranging from 200-500 V discharge voltage, 10-40 A discharge current, and 2-8 kW discharge power. Reductions in plume divergence and increased near-field plume symmetries were found to result from the use of an internally-mounted cathode instead of the traditional externally-mounted configuration. High-current hollow cathodes developed at JPL utilizing lanthanum hexaboride (LaB6) emitters were also demonstrated. Discharge currents up to 100 A were achieved with the cathode operating alone and up to 40 A during operation with the Hall thruster. LaB6 cathodes were investigated because of their potential to reduce overall system cost and risk due to less stringent xenon purity and handling requirements.

Fitzgerald, Dennis J.↗

NASA NTRS2006

Effects of an Internally-Mounted Cathode on Hall Thruster Plume Properties

The effects of cathode position on the plume properties of an 8 kW BHT-8000 Busek Hall thruster are discussed. Experiments were conducted at the Jet Propulsion Laboratory (JPL) in a vacuum chamber suitable for the development and qualification of high-power Hall thrusters. Multi-mode Hall thruster operation was demonstrated at operating conditions ranging from 200-500 V discharge voltage, 10-40 A discharge current, and 2-8 kW discharge power. Reductions in plume divergence and increased near-field plume symmetries were found to result from the use of an internally-mounted cathode instead of the traditional externally-mounted configuration. High-current hollow cathodes developed at JPL utilizing lanthanum hexaboride (LaB6) emitters were also demonstrated. Discharge currents up to 100 A were achieved with the cathode operating alone and up to 40 A during operation with the Hall thruster. LaB6 cathodes were investigated because of their potential to reduce overall system cost and risk due to less stringent xenon purity and handling requirements.

electric propulsion↗

NASA NTRS2001

Propulsion Instruments for Small Hall Thruster Integration

Planning and development are underway for the propulsion instrumentation necessary for the next AFRL electric propulsion flight project, which includes both a small Hall thruster and a micro-PPT. These instruments characterize the environment induced by the thruster and the associated data constitute part of a 'user's manual' for these thrusters. Several instruments probe the back-flow region of the thruster plume, and the data are intended for comparison with detailed numerical models in this region. Specifically, an ion probe is under development to determine the energy and species distributions, and a Langmuir probe will be employed to characterize the electron density and temperature. Other instruments directly measure the effects of thruster operation on spacecraft thermal control surfaces, optical surfaces, and solar arrays. Specifically, radiometric, photometric, and solar-cell-based sensors are under development. Prototype test data for most sensors should be available, together with details of the instrumentation subsystem and spacecraft interface.

ion probes↗