Search NASA⌕ Search

Engineering topics

Johnson, Ron

Publications and source records attributed to Johnson, Ron.

The Role of Indian Tribes in the Safe, Secure, and Routine Transportation of Spent Nuclear Fuel and High-Level Radioactive Waste - 19463

Far too often federally recognized Indian Tribes are the last stakeholders invited to the table to discuss a particular issue with potentially wide-ranging impacts. Indian tribes were the first governments on this continent. With respect to the future transportation of spent nuclear fuel (SNF) or high-level radioactive waste (HLW), Indian tribes are potentially impacted in a myriad of ways: economics, cultural, environmental, health and safety. Yet few regulators fully understand and appreciate the legal and political standing of Indian tribes. This paper will examine the ways in which Indian tribes must be involved with the planning for safe, secure and routine SNF and HLW shipments and the ways in which the federal government is obligated to involve tribes. Indian tribes are similar to states in that they are responsible for the health and safety of its members (which they themselves define). Tribes, like states, make, implement, interpret, and enforce laws, and provide public services - healthcare, public education, social services, drug treatment, public safety and emergency management, transportation, managing natural resources, public housing, and environmental and cultural preservation. Many tribes also operate economic enterprises - manufacturing, farming, forestry, and gaming. The most basic principle of Indian law is the principle of 'sovereignty,' that is, an Indian tribe possesses all the powers of any sovereign state. Tribal governments are not subject to state or local jurisdiction but are subject to federal jurisdiction. The tribes enjoy a government-to-government relationship (and expectation) with the federal government (i.e., agencies, like the Department of Energy, the Nuclear Regulatory Commission). Of paramount concern to Indian tribes is the doctrine of Trust Responsibility, the general principle that the federal government's conduct 'in dealing with the Indians should therefore be judged by the most exacting fiduciary standards.' With respect to SNF/HLW this means that the federal government has an obligation (or a Trust Responsibility) to ensure that tribal people, lands and resources are protected. Equally important is the expectation that federal agencies will work with the Indian tribes on a government-to-government basis before undertaking any action with potential negative consequences on the tribe's people, land or resources. The concept of government-to-government consultation between Indian tribes and the United States is long standing and well recognized. As expressed in Executive Order 13175, 'Consultation and Coordination with Indian Tribal Governments': 'Consultation - Each federal agency must have an accountable process to ensure meaningful and timely input by tribal officials in the development of regulatory policies that have tribal implications.' The purpose of consultation is to ensure that Indian tribes are consulted before government officials make decisions that may have an impact on their lives and territories. The three agencies involved with SNF and HLW transportation - the US Department of Transportation (DOT), the US Nuclear Regulatory Commission (NRC), and the US Department of Energy (DOE) - have had various degrees of success with respect to direct consultation with Indian tribes. Given that there is plenty of lead-time before the first shipments commence, there should be ample time to develop a strategy for ensuring that tribes are equal partners when planning and preparing for shipments of SNF and HLW to the first interim storage facility. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Liquid-Rich Shale Potential of Utah’s Uinta and Paradox Basins: Reservoir Characterization and Development Optimization

The enclosed report is the culmination of a multi-year and multi-faceted research project investigating Utah’s unconventional tight oil potential. From the beginning, the project team focused efforts on two different plays: (1) the basal Green River Formation’s (GRF) Uteland Butte unconventional play in the Uinta Basin and (2) the more established but understudied Cane Creek shale play in the Paradox Basin. The 2009-2014 high price of crude oil, coupled with lower natural gas prices, generated renewed interest in exploration and development of liquid hydrocarbon reserves. Following the success of the mid-2000s shale gas boom and employing many of the same well completion techniques, petroleum companies started exploring for liquid petroleum in shale formations. In fact, many shales targeted for natural gas include areas in which the shale is more prone to liquid production. In Utah, organic-rich shales in the Uinta and Paradox Basins have been the source of significant hydrocarbon generation, with companies traditionally targeting the interbedded sands or carbonates for their conventional resource recovery. Because of the advances in horizontal drilling and hydraulic fracturing techniques, operators in these basins started to explore the petroleum production potential of the shale units themselves. The GRF in the Uinta Basin has been studied for over 50 years, since the first hydrocarbon discoveries. However, those studies focused on the many conventional sandstone reservoirs currently producing oil and gas. In contrast, less information was available about the more unconventional crude oil production potential of thinner carbonate/shale units, most notably the basal Uteland Butte member. The Cane Creek shale of the Paradox Basin has been a target for exploration periodically since the 1960s and produces oil from several small fields. The play generated much interest in the early 1990s with the successful use of horizontal drilling. Recently, the USGS assessed the undiscovered oil resource in the Cane Creek shale of the Paradox Basin at 103 million barrels at a 95 percent confidence level and 198 million barrels at a 50 percent confidence level. Nonetheless, limited research was available or published to further define the play and the reservoir characteristics. The specific objectives of the enclosed research were to (1) characterize geologic, geochemical, and geomechanical rock properties of target zones in the two designated basins by compiling data and by analyzing available cores, cuttings, and well logs; (2) describe outcrop reservoir analogs of GRF plays (Cane Creek shale is not exposed) and compare them to subsurface data; (3) map major regional trends for targeted intervals and identify “sweet spots” that have the greatest oil potential; (4) reduce exploration costs and drilling risks, especially in environmentally sensitive areas; (5) improve drilling and fracturing effectiveness by determining optimal well completion design; and (6) reduce field development costs, maximize oil recovery, and increase reserves. These objectives are all addressed in a series of nine publications that resulted from this extensive research project. Each publication is included in this report as an independent appendix.

02 PETROLEUM↗

Belle-II Experiment Network Requirements

The Belle experiment, part of a broad-based search for new physics, is a collaboration of ~400 physicists from 55 institutions across four continents. The Belle detector is located at the KEKB accelerator in Tsukuba, Japan. The Belle detector was operated at the asymmetric electron-positron collider KEKB from 1999-2010. The detector accumulated more than 1 ab-1 of integrated luminosity, corresponding to more than 2 PB of data near 10 GeV center-of-mass energy. Recently, KEK has initiated a $400 million accelerator upgrade to be called SuperKEKB, designed to produce instantaneous and integrated luminosity two orders of magnitude greater than KEKB. The new international collaboration at SuperKEKB is called Belle II. The first data from Belle II/SuperKEKB is expected in 2015. In October 2012, senior members of the Belle-II collaboration gathered at PNNL to discuss the computing and neworking requirements of the Belle-II experiment with ESnet staff and other computing and networking experts. The day-and-a-half-long workshop characterized the instruments and facilities used in the experiment, the process of science for Belle-II, and the computing and networking equipment and configuration requirements to realize the full scientific potential of the collaboration's work.

43 PARTICLE ACCELERATORS↗

Arctic Energy Technology Development Laboratory

The Arctic Energy Technology Development Laboratory was created by the University of Alaska Fairbanks in response to a congressionally mandated funding opportunity through the U.S. Department of Energy (DOE), specifically to encourage research partnerships between the university, the Alaskan energy industry, and the DOE. The enabling legislation permitted research in a broad variety of topics particularly of interest to Alaska, including providing more efficient and economical electrical power generation in rural villages, as well as research in coal, oil, and gas. The contract was managed as a cooperative research agreement, with active project monitoring and management from the DOE. In the eight years of this partnership, approximately 30 projects were funded and completed. These projects, which were selected using an industry panel of Alaskan energy industry engineers and managers, cover a wide range of topics, such as diesel engine efficiency, fuel cells, coal combustion, methane gas hydrates, heavy oil recovery, and water issues associated with ice road construction in the oil fields of the North Slope. Each project was managed as a separate DOE contract, and the final technical report for each completed project is included with this final report. The intent of this process was to address the energy research needs of Alaska and to develop research capability at the university. As such, the intent from the beginning of this process was to encourage development of partnerships and skills that would permit a transition to direct competitive funding opportunities managed from funding sources. This project has succeeded at both the individual project level and at the institutional development level, as many of the researchers at the university are currently submitting proposals to funding agencies, with some success.

01 COAL, LIGNITE, AND PEAT↗

Effects of Village Power Quality on Fuel Consumption and Operating Expenses

Alaska's rural village electric utilities are isolated from the Alaska railbelt electrical grid intertie and from each other. Different strategies have been developed for providing power to meet demand in each of these rural communities. Many of these communities rely on diesel electric generators (DEGs) for power. Some villages have also installed renewable power sources and automated generation systems for controlling the DEGs and other sources of power. For example, Lime Village has installed a diesel battery photovoltaic hybrid system, Kotzebue and Wales have wind-diesel hybrid systems, and McGrath has installed a highly automated system for controlling diesel generators. Poor power quality and diesel engine efficiency in village power systems increases the cost of meeting the load. Power quality problems may consist of poor power factor (PF) or waveform disturbances, while diesel engine efficiency depends primarily on loading, the fuel type, the engine temperature, and the use of waste heat for nearby buildings. These costs take the form of increased fuel use, increased generator maintenance, and decreased reliability. With the cost of bulk fuel in some villages approaching $1.32/liter ($5.00/gallon) a modest 5% decrease in fuel use can result in substantial savings with short payback periods depending on the village's load profile and the cost of corrective measures. This project over its five year history has investigated approaches to improving power quality and implementing fuel savings measures through the use of performance assessment software tools developed in MATLAB{reg_sign} Simulink{reg_sign} and the implementation of remote monitoring, automated generation control, and the addition of renewable energy sources in select villages. The results have shown how many of these communities would benefit from the use of automated generation control by implementing a simple economic dispatch scheme and the integration of renewable energy sources such as wind generation.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Characterization of a Small Form Factor Multipole RGA for Process Chamber Monitoring and for Reduction in Time to Complete Routine Preventive Maintenance

A small form-factor, multipole Residual Gas Analyzer (RGA) has been used to study steady state and post-PM conditions in an Axcelis GSD ion implanter. The RGA properties and specifications are discussed and data is presented to illustrate N{sub 2}, O{sub 2}, and H{sub 2}O pump-down curve characteristics. Baseline performance is compared to performance following invasive activities to determine applicability for eliminating explicit He leak checking requirements and for the determination of how quickly a machine may be returned to production. The target ion implanter was an Axcelis GSD/200E.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation of Beam Transport Characteristics and Mass Resolving Power to Analyzing Magnet Pole Piece Wear in Axcelis HE Ion Implanters

An investigation into odd analyzing magnet tuning behavior on an Axcelis HE ion implanter revealed a correlation to excessive wear on the analyzer magnet pole pieces. Though the lifetime is generally quite good, the pole pieces are internal to the beamline design and are exposed to and sputtered by the ion beam during mass analysis. This erosion of the pole piece surfaces affects beam focus and transport, especially for lower current ion beams. Eventually, automatic beam set-up fails altogether as the system is unable to locate the correct amu peak. It is important to understand and correct any deficiencies in pole piece condition as long-term neglect will eventually lead to process errors. Data is presented to illustrate good and bad pole piece condition and a method is suggested for non-invasive testing.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlation of Measured Surface Contaminants as a Function of Ion Beam Current in GSD Ion Implanters

An investigation into measured differences in surface contaminant levels when evaluating several ion implant tools and/or tool types. For a given species and energy, beam current appears to have a strong effect on final contaminant levels. Ideally one evaluates process integrity at machine set-up conditions that approximate or exceed the worst case conditions required for regular, volume wafer production. Some contaminants may exhibit a 'threshold' effect where they are easily observed with sufficient beam current, but not present at all for lower beam currents. Knowing the characteristics of the measurement process is essential in obtaining reliable results with a clear interpretation and better facilitates cross-site or cross-platform comparisons.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗