Engineering topics
Publications and source records attributed to Johnston, M..
The Mars Reconnaissance Orbiter will deliver to Mars orbit a payload to conduct remote sensing science observations, characterize sites for future landers, and provide critical telecom/navigation relay capability for follow-on missions.
This paper focuses on and describes the strategy developed for the second phase of aerobraking MGS. This description includes the baseline aerobraking flight profile and the key trajectory metrics that were monitored in order to successfully guide the spacecraft to its desired mapping orbit.
The Mars Global Surveyor spacecraft was successfully inserted into an elliptical orbt around Mars on September 12, 1997, with an orbital period of 45.0 hours.
The Mars Global Surveyor (MGS) spacecraft was successfully inserted into an elliptical orbit around Mars on 9/12/97, 01:53:49 UTC. This orbit was near polar (inclination=93.26 deg) with an orbital period of 44.993 hours and apoapsis and periapsis altitudes of 54,025.9 km and 262.9 km respectively. After 201 orbits and 196 days after Mars orbit insertion, the first phase of aerobraking (AB), called AB 1, has ended; after the AB 1 termination maneuver, the orbital period was 11.64 hours with apoapsis and periapsis altitudes of 17,870.3 and 170.7 Ian respectively. Thereafter, MGS was in a science phasing orbit (SPO) and acquired data from the science instruments from 3/28/98 to 9/22/98 (orbits 202 through 572). The second phase of aerobraking (AB2) began on 9/23/98 with the first descent into the atmosphere on P574 and ended with the aerobraking termination maneuver (ABX) on 2/4/99 on A 1284. Just prior to ABX, the apoapsis and periapsis altitudes were 456.5 km and 116.7 km respectively with an orbit period of 1.973 hours, a local mean solar time (LMST) at the descending node of 2 hours, 3.6 minutes and an inclination of 92.9 degrees. AB was responsible for circularization of the MGS orbit. However, two additional orbital conditions had to be satisfied simultaneously. These were a) complete AB2 when the LMST at the descending node was close to 2:00 am and b) the inclination was at 93.0 degrees. This paper describes the navigation of MGS throughout AB2; a companion paper describes the strategy and plan for aerobraking. Navigation challenges involved: a) the estimation of an atmospheric density model for every drag pass or periapsis-passage by analyzing doppler tracking data, b) the generation of a short-term, that is over one to several orbits, accurate atmospheric density predictions, c) maintaining the spacecraft's orbit within upper and lower bounds of atmospheric density or dynamic pressure during each periapsis-passage, and d) the prediction of accurate periapsis-passage times (Tp) over one to fifteen orbits. The density estimation and analysis procedure, evaluation of almost 700 atmospheric densities throughout AB2, the variation and accuracy of density predictions, the Tp prediction accuracy and how effectively we terminated AB2 are the basis of this paper and shall be presented in detail. A summary overview of AB2 is given.
The Mars Global Surveyor spacecraft was launched on November 6, 1996 and was captured into a highly elliptical, 45 hour orbit around Mars with a 973 m/s propulsive maneuver on September 12, 1997.
The Mars Global Surveyor (MGS) spacecraft was successfully inserted into an elliptical orbit around Mars on 9/12/97, 01:53:49 UTC. This orbit was near polar (inclination = 93.26 deg) with an orbital period of 44.993 hours and apoapsis and periapsis altitudes of 54,025.9 km and 262.9 km respectively. After a short aerobraking (AB) initiation interval (9/12/97 to 10/2/97), the main phase of AB or orbit period reduction was established. However shortly thereafter, a significant problem with the minus-Y axis solar array developed which necessitated a temporary suspension of AB. Ultimately, this forced the Project to abandon the original plan to complete AB on 1/18/98 and establish the mapping orbit on 3/15/98. The revised plan called for a reduced level of AB, thus subjecting the solar array and yoke assembly to less aerodynamic stress. After 201 orbits and 196 days after MOI, the first phase of AB has ended, the orbital period was 11.64 hours with apoapsis and periapsis altitudes of 17,870.3 and 170.7 km respectively. At present, MGS is in a science phasing orbit (SPO) and shall acquire science data from 3/28/98 to 9/11/98. Thereafter the second phase of AB shall begin and is expected to end during Feb 1999 when the orbital period shall be 1.9 hours and the orbit's descending node shall be at the 2:00 am (local mean solar time) orientation.
This paper describes the areobraking strategy developed for the MGS mission. In addition, this paper describes the aerobraking progress of the MGS spacecraft made following a three week aerobraking hiatus that occurred in October 1997.
Navigation and trajectory planning aspects for the Mars global surveyor (MGS) mission, are discussed. In the first 205 days of the mission since launch on 7 November July 1996, two trajectory maneuvers were successfully completed. The third maneuver was cancelled due to the accuracy of the targeting of the previous maneuvers. The final trajectory correction maneuver will occur on arrival in order to adjust the arrival conditions for the Mars orbit insertion maneuver. The planned capture orbit is highly elliptical with a 45 hour orbital period, a 300 km periapsis altitude and a descending node. Two-way coherent Doppler and time delay measurements are acquired in the X-band by the Deep Space network and used to navigate the spacecraft. After capture, the orbit will be circularized by aerobraking and propulsive maneuvers. The three-phase aerobraking maneuver is described. During the 687 earth-day observation period, navigation will maintain a 2:00 pm descending node, sun-synchronous low altitude, short periodic orbit. Ground track coverage will remain almost uniform in order to maximize data acquisition.
The Mars Global Surveyor was successfully launched from Cape Kennedy on November 7, 1996. This paper discusses the details of the various navigation phases of the mission.
The Mars Global Surveyor spacecraft was successfully laucnded from Cape Canaveral by a Delta II 7925 rocket on 11/7/96, 17:00:50 UTC.
SPIKE is a mission planning software system developed by a team of programmers at the STScI for use with the Hubble Space Telescope (HST). SPIKE has been developed for the purpose of automating observatory scheduling to increase the effective utilization and ultimately, scientific return from orbiting telescopes. High-level scheduling strategies using both rule-based and neural network approaches have been incorporated. Graphical displays of activities, constraints, and schedules are an important feature of the system. Although SPIKE was originally developed for the HST, it can be used for other astronomy missions including ground-based observatories. One of the missions that has decided to use SPIKE is ASTRO-D, a Japanese X-ray satellite for which the U.S. is providing a part of the scientific payload. Scheduled to fly in Feb. 1993, its four telescopes will focus X-rays over a wide energy range onto CCD's and imaging gas proportional counters. ASTRO-D will be the first X-ray imaging mission operating over the 0.5-12 keV band with high energy resolution. This combination of capabilities will enable a varied and exciting program of astronomical research to be carried out. ASTRO-D is expected to observe 5 to 20 objects per day and a total of several thousands per year. This requires the implementation of an efficient planning and scheduling system which SPIKE can provide. Although the version of SPIKE that will be used for ASTRO-D mission is almost identical to that used for the HST, there are a few differences. For example, ASTRO-D will use two ground stations for data downlinks, instead of the TDRSS system for data transmission. As a consequence ASTRO-D is constrained by limited on-board data storage capacity to schedule high data-rate observations during periods of frequent high bit rate observations accordingly. We will demonstrate the ASTRO-D version of SPIKE to show what SPIKE can provide and how efficiently it creates an observational schedule.
The HEAO 1 modulation-collimator data associate the X-ray emission from the Cygnus A region (4U 1957 + 40) with a small area including the radio galaxy. The source appears to be extended, with a size of about 2 arcmin; it may have a complex geometry. Any point-source component must have a flux no greater than 1.3 UFU. A lower limit of 1 microgauss is placed on the magnetic field in the radio lobes, based on the upper limit on the X-ray flux due to inverse Compton scattering of radio electrons on the 2.7-K microwave background radiation. The X-ray emission is more likely due to driven accretion of the intercluster gas onto the giant cD radio galaxy. Therefore this source appears to be similar to the Virgo and Perseus clusters. The density derived for the X-ray-emitting gas is too small for its thermal pressure to confine the radio source.
Explore the source record for details and available documents.
This paper reports preliminary results on the positions of X-ray sources obtained with the modulation collimator on the first NASA High Energy Astronomy Observatory, HEAO 1. Calibration on Sco X-1 establishes the experiment capabilities to be within 7 sec as limited by aspect errors. For the reported X-ray sources certain ambiguities in their positions are resolved and the previous optical identifications of four sources are confirmed, two of which are X-ray bursters and one of which is the black hole candidate Cir X-1. An accurate position for a new transient source is also presented.
The celestial position of the 3.6-s X-ray pulsar, 4U 0115 + 63, has been measured to a precision of 12 arcsec in one dimension with the scanning modulation collimator experiment on HEAO 1. This result, together with a position obtained with SAS 3, has led to the identification of an early-type star as the optical counterpart. An X-ray luminosity of approximately 3 by 10 to the 37th power erg/s (3-13 keV) is inferred from the observed flux of about 30% that of the Crab and an estimated distance of 5 kpc. The pulse profile over the energy range 3-13 keV is similar to that of Cen X-3.
Four weak sources for which precise positions have been obtained from the HEAO-1 Scanning Modulation Collimator (MC) experiment are discussed. One source (4U 0446+44) with the center of the cluster of galaxies containing 3C129 and 3C129.1 has been identified, and its angular size has been measured. One source with a galactic star is identified, although it is at galactic latitude b = 51 deg. The other two sources, 2A 0526-328 and 2A 0922-317, remain unidentified.