Search NASA⌕ Search

Engineering topics

Jonathan Woodward

Publications and source records attributed to Jonathan Woodward.

9 records
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Challenges, Lessons Learned, and Methodologies from the LCRD Optical Communication System AI&T

The Laser Communications Relay Demonstration (LCRD) is a space flight technology demonstration mission, led by the National Aeronautics and Space Administration (NASA) Goddard Space Flight Center (GSFC) in Greenbelt, Maryland and sponsored by NASA’s Technology Demonstration Missions (TDM) Program and Space Communications and Navigation (SCaN) Program Office. The LCRD payload is hosted on the Department of Defense (DoD) Space Test Program (STP) Satellite-6 (STPSat-6) space vehicle and will operate in geostationary orbit (GEO). Launching in late 2021, the mission will conduct a minimum of two years of communication experiments with optical terminals at NASA’s Jet Propulsion Laboratory (JPL) Table Mountain Facility, in Hawaii, on the International Space Station in LEO, and via a high bandwidth radio link to White Sands Complex (WSC), New Mexico. This paper focuses on the assembly, integration, and test (AI&T) campaign spanning more than four years, using multiple test facilities, and involving multiple partner collaborations.

Bernie Edwards↗
NASA NTRSDate not supplied

Laser Communications Relay Demonstration Optimetrics Experiment

Within this paper, we report on an Optimetrics experiment conducted on the National Aeronautics and Space Administration (NASA) Laser Communication Relay Demonstration (LCRD). The high precision two-way ranging is conducted on the optical communications link between the LCRD space terminal in a geosynchronous orbit and the Optical Ground Station 1 (OGS1) at Table Mountain, California, and is referred to as optimetrics ranging. The receiver to transmitter clock loopback is implemented in the LCRD space modem. A digital dual mixer time difference phase meter (DDMTD) is implemented in the OGS1 ground modem. The round-trip time is measured with the DDMTD by counting the frame and data clock ticks between transmitter and receiver frame synchronization markers for coarse range, and the relative phase of the transmit and receive clock for high precision range. This approach provides coverage for all potential ranges with no ranging ambiguity. The flight modem FPGA code was modified for frame and data clock loopback and the OGS1 FPGA code was modified for the DDMTD phase meter implementation. The experiment team conducted a 36-hour continuous ranging measurement. Preliminary two-way optimetrics ranging data show a noise floor of 3cm (rms). Based on our theoretical noise analysis and ground tests with spare flight modems, we expected one order of magnitude improvement on ranging precision. We are conducting detailed post data processing to identify the differences to further reduce the noise level and formulating an improved implementation approach for future missions. For reference and comparison, traditional Radio Frequency (RF) ranging between LCRD and OGS1 was conducted at the same time and indicates a ranging noise floor of 30cm(rms). Other telemetry and relevant environmental parameters such as weather and atmosphere temperature were also collected for offline data processing. The high precision ranging and range rate measurements from the laser communications data link clock and clock phase are performed simultaneously with continuous optical communication. No extra hardware added to existing system. This high precision optimetrics measurement implementation provides alternative ranging and range rate measurements for orbit determination (OD) and flight dynamics calculations with higher precision. We see significant improvement on OD for navigation upon implementation in future optical communication systems.

Rafael Garcia↗
NASA NTRSDate not supplied

NASA's Laser Communications Relay Demonstration (LCRD) Experiment Program: Characterization and Initial Operations

The National Aeronautics and Space Administration’s (NASA) Laser Communications Relay Demonstration (LCRD) completed the first 18 months of its Experiment Program in December 2023. Geosynchronous-ground experiments to date have included demonstrations of optimetrics and of Delay/Disruption Tolerant Networking (DTN), and measurements of the effects of the atmosphere on lasercom performance and availability. Future operational scenarios have been emulated. This paper provides an overview and highlights of the first 18 months of LCRD experiments, and a preview of the upcoming experiments, including relaying data to and from the International Space Station.

optical communications↗
NASA NTRSDate not supplied

Insights and Observations from Operating a Geostationary Laser Communication Relay Mission: Operational Lessons from NASA’s Laser Communications Relay Demonstration (LCRD) and Associated Optical Ground Stations (OGSs)

The NASA Laser Communications Relay Demonstration (LCRD) has operated on orbit for the last two years. The LCRD Mission consists of a geostationary payload and two optical ground stations. This technology demonstration mission is NASA’s first two-way, end-to-end optical communications relay. LCRD has performed an extensive experiment campaign to analyze laser communication performance for extended operations. This paper discusses various lessons learned while operating the optical relay mission from early commissioning through two years of operation. Before launch, engineers and operators performed analyses to generate operational procedures based on expected LCRD performance. However, only operation on orbit can supply actual performance data. Additional topics covered in this paper include pre-launch and commissioning testing, ephemeris generation and cadence, environmental configurations, and accommodation concerns. The addition of Integrated Laser Communications Relay Demonstration Low Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T) to the optical network supplemented the LCRD team’s operational experiences and enabled them to garner new lessons learned. The authors of this paper include day-to-day flight leads who consulted with on-console operators, engineers, and subject matter experts analyzing data and experiment results to gather the lessons learned described in this paper. LCRD is a joint project involving NASA Goddard Space Flight Center (GSFC), the California Institute of Technology Jet Propulsion Laboratory (JPL), and Massachusetts Institute of Technology Lincoln Laboratory (MIT LL).

Lessons Learned↗
NASA NTRSDate not supplied

Insights and Observations From Operating A Laser Communication Terminal on the International Space Station (ISS)

The Integrated Laser Communication Relay Demonstration (LCRD) Low Earth Orbit User Modem and Amplifier Terminal (ILLUMA-T) is the first user platform for NASA’s first laser communication relay, LCRD. ILLUMA-T is hosted on the International Space Station (ISS) as an external payload of the Japanese Experiment Module – Exposed Facility (JEM-EF) situated in slot 3. The LCRD payload is hosted on the STPSat-6 spacecraft, which orbits Earth in a geostationary orbit at position 112 W. The ILLUMA-T-to-LCRD system provides a bidirectional, space-to-ground laser communication relay link transferring data up to 1.2 Gbps utilizing two optical ground stations (OGS), OGS-1 in California and OGS-2 in Hawai’i. This paper describes lessons learned from operating the ILLUMA-T system and examines topics such as the end-to-end system availability, predictive versus actual ephemeris, acquisition adjustments, modem timing and handshaking, the terminal’s physical placement and accommodations, and experiment development, execution, and analysis. The authors of this paper operate both the LCRD and ILLUMA-T laser terminals on a daily basis including pass planning, procedure execution, acquisition analysis, and real-time terminal commanding and telemetry monitoring. LCRD is a joint project involving NASA Goddard Space Flight Center (GSFC), the California Institute of Technology Jet Propulsion Laboratory (JPL), and Massachusetts Institute of Technology Lincoln Laboratory (MIT LL). The ILLUMA-T payload is managed by NASA GSFC in Greenbelt, Maryland whose partners include the ISS program office at NASA’s Johnson Space Center (JSC) in Houston, Texas; the Huntsville Operations Support Center (HOSC) at Marshall Space Flight Center (MSFC) in Huntsville, Alabama; the Glenn Research Center (GRC) in Cleveland, Ohio; and the MIT LL in Lexington, Massachusetts. ILLUMA-T is funded by the Space Communications and Navigation (SCaN) Program at NASA Headquarters in Washington, D.C.

Laser Communications↗
NASA NTRSDate not supplied

Completion of NASA’s Two-Year Laser Communications Relay Demonstration (LCRD) Experiment Program

The National Aeronautics and Space Administration’s (NASA) Laser Communications Relay Demonstration (LCRD) completed its two-year experiment program in June 2024. The LCRD geosynchronous payload includes two laser communications terminals interconnected via an onboard electronic switch. The payload relays data between two optical ground stations located in California and Hawaii and can also exchange data with an RF ground station in New Mexico. The addition of the Integrated LCRD Low-Earth Orbit (LEO) User Modem and Amplifier Terminal (ILLUMA-T) on the International Space Station in 2023 enabled data relay demonstrations between a laser terminal in low Earth orbit and either one of the optical ground stations or the RF ground station. The experiment program has included a variety of experiments originating within the LCRD project, NASA, and industry. The experiments have included measurements of the effects of the atmospheric optical channel (turbulence, weather) on the performance and availability of laser communications, adaptive optics characterization, demonstration of optimetrics techniques, and demonstration of Delay/Disruption Tolerant Networking (DTN). Furthermore, various future operational scenarios including robotic and exploration missions and various network service configurations have been emulated. This conference paper provides an overview and highlights of the LCRD experiment program with an emphasis on activities and results since the start of the ILLUMA-T testing in December 2023. A discussion of the expectations for the next phase of the LCRD mission, as well as how LCRD results may be applied to future applications is also included. LCRD is a joint project involving NASA Goddard Space Flight Center (GSFC), the California Institute of Technology Jet Propulsion Laboratory (JPL), and Massachusetts Institute of Technology Lincoln Laboratory (MIT LL).

Laser communications↗
NASA NTRSDate not supplied

Completion of NASA’s Two-Year Laser Communications Relay Demonstration (LCRD) Experiment Program

"The National Aeronautics and Space Administration’s (NASA) Laser Communications Relay Demonstration (LCRD) completed its two-year experiment program in June 2024. The LCRD geosynchronous payload includes two laser communications terminals interconnected via an onboard electronic switch. The payload relays data between two optical ground stations located in California and Hawaii and can also exchange data with an RF ground station in New Mexico. The addition of the Integrated LCRD Low-Earth Orbit (LEO) User Modem and Amplifier Terminal (ILLUMA-T) on the International Space Station in 2023 enabled data relay demonstrations between a laser terminal in low Earth orbit and either one of the optical ground stations or the RF ground station. The experiment program has included a variety of experiments originating within the LCRD project, NASA, and industry. The experiments have included measurements of the effects of the atmospheric optical channel (turbulence, weather) on the performance and availability of laser communications, adaptive optics characterization, demonstration of optimetrics techniques, and demonstration of Delay/Disruption Tolerant Networking (DTN). Furthermore, various future operational scenarios including robotic and exploration missions and various network service configurations have been emulated. This conference paper provides an overview and highlights of the LCRD experiment program with an emphasis on activities and results since the start of the ILLUMA-T testing in December 2023. A discussion of the expectations for the next phase of the LCRD mission, as well as how LCRD results may be applied to future applications is also included. LCRD is a joint project involving NASA Goddard Space Flight Center (GSFC), the California Institute of Technology Jet Propulsion Laboratory (JPL), and Massachusetts Institute of Technology Lincoln Laboratory (MIT LL). "

Lasercom↗