Engineering topics

Jones, Gregory S.

Publications and source records attributed to Jones, Gregory S..

36 records · Page 2

NASA NTRS2005

Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 1

As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the 2004 state-of-the-art in circulation control and understand the roadblocks to its application. The workshop addressed applications, CFD, and experiments related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of 34 single session oral presentations and written papers that focused on Naval hydrodynamic vehicles (e.g. submarines), Fixed Wing Aviation, V/STOL platforms, propulsion systems (including wind turbine systems), ground vehicles (automotive and trucks) and miscellaneous applications (e.g., poultry exhaust systems and vacuum systems). Several advanced CFD codes were benchmarked using a two-dimensional NCCR circulation control airfoil. The CFD efforts highlighted inconsistencies in turbulence modeling, separation and performance predictions.

Jones, Gregory S.↗

NASA NTRS2005

Proceedings of the 2004 NASA/ONR Circulation Control Workshop, Part 2

This conference proceeding is comprised of papers that were presented at the NASA/ONR Circulation Control Workshop held 16-17 March 2004 at the Radisson-Hampton in Hampton, VA. Over two full days, 30 papers and 4 posters were presented with 110 scientists and engineers in attendance, representing 3 countries. As technological advances influence the efficiency and effectiveness of aerodynamic and hydrodynamic applications, designs, and operations, this workshop was intended to address the technologies, systems, challenges and successes specific to Coanda driven circulation control in aerodynamics and hydrodynamics. A major goal of this workshop was to determine the state-of-the-art in circulation control and to assess the future directions and applications for circulation control. The 2004 workshop addressed applications, experiments, computations, and theories related to circulation control, emphasizing fundamental physics, systems analysis, and applied research. The workshop consisted of single session oral presentations, posters, and written papers that are documented in this unclassified conference proceeding. The format of this written proceeding follows the agenda of the workshop. Each paper is followed with the presentation given at the workshop. the editors compiled brief summaries for each effort that is at the end of this proceeding. These summaries include the paper, oral presentation, and questions or comments that occurred during the workshop. The 2004 Circulation Control Workshop focused on applications including Naval vehicles (Surface and Underwater vehicles), Fixed Wing Aviation (general aviation, commercial, cargo, and business aircraft); V/STOL platforms (helicopters, military aircraft, tilt rotors); propulsion systems (propellers, jet engines, gas turbines), and ground vehicles (automotive, trucks, and other); wind turbines, and other nontraditional applications (e.g., vacuum cleaner, ceiling fan). As part of the CFD focus area of the 2004 CC Workshop, CFD practitioners were invited to compute a two-dimensional benchmark problem for which geometry, flow conditions, grids, and experimental data were available before the workshop. The purpose was to accumulate a database of simulations for a single problem using a range of CFD codes, turbulence models, and grid strategies so as to expand knowledge of model performance/requirements and guide simulation of practical CC configurations.

Jones, Gregory S.↗

NASA NTRS2005

Pneumatic Flap Performance for a 2D Circulation Control Airfoil, Steady and Pulsed

Circulation Control technologies have been around for 65 years, and have been successfully demonstrated in laboratories and flight vehicles alike, yet there are few production aircraft flying today that implement these advances. Circulation Control techniques may have been overlooked due to perceived unfavorable trade offs of mass flow, pitching moment, cruise drag, noise, etc. Improvements in certain aspects of Circulation Control technology are the focus of this paper. This report will describe airfoil and blown high lift concepts that also address cruise drag reduction and reductions in mass flow through the use of pulsed pneumatic blowing on a Coanda surface. Pulsed concepts demonstrate significant reductions in mass flow requirements cor Circulation Control, as well as cruise drag concepts that equal or exceed conventional airfoil systems.

Jones, Gregory S.↗

NASA NTRS2003

Advances in Pneumatic-Controlled High-Lift Systems Through Pulsed Blowing

Circulation Control technologies have been around for 65 years, and have been successfully demonstrated in laboratories and flight vehicles alike. Yet there are few production aircraft flying today that implement these advances. Circulation Control techniques may have been overlooked due to perceived unfavorable trade offs of mass flow, pitching moment, cruise drag, noise, etc. Improvements in certain aspects of Circulation Control technology are the focus of this paper. This report will describe airfoil and blown high lift concepts that also address cruise drag reduction and reductions in mass flow through the use of pulsed pneumatic blowing on a Coanda surface. Pulsed concepts demonstrate significant reductions in mass flow requirements for Circulation Control, as well as cruise drag concepts that equal or exceed conventional airfoil systems.

Jones, Gregory S.↗

NASA NTRS2002

An Active Flow Circulation Controlled Flap Concept for General Aviation Aircraft Applications

A recent focus on revolutionary aerodynamic concepts has highlighted the technology needs of general aviation and personal aircraft. New and stringent restrictions on these types of aircraft have placed high demands on aerodynamic performance, noise, and environmental issues. Improved high lift performance of these aircraft can lead to slower takeoff and landing speeds that can be related to reduced noise and crash survivability issues. Circulation Control technologies have been around for 65 years, yet have been avoided due to trade offs of mass flow, pitching moment, perceived noise etc. The need to improve the circulation control technology for general aviation and personal air-vehicle applications is the focus of this paper. This report will describe the development of a 2-D General Aviation Circulation Control (GACC) wing concept that utilizes a pulsed pneumatic flap.

Jones, Gregory S.↗

NASA NTRS2002

Overview of Active Flow Control Actuator Development at NASA Langley Research Center

The paper provides an overview of the actuator development work that is currently underway at NASA Langley Research Center in the context of some of the Active Flow Control research being conducted at NASA Langley. The actuator development effort has provided a focused, centralized location for this work within NASA Langley. The multidisciplinary team approach utilized in this effort has allowed input from multiple disciplines on how various actuator challenges can be addressed and has lead to some unique approaches in actuation.

Schaeffler, Norman W.↗

NASA NTRS2002

Flow Control Research at NASA Langley in Support of High-Lift Augmentation

The paper describes the efforts at NASA Langley to apply active and passive flow control techniques for improved high-lift systems, and advanced vehicle concepts utilizing powered high-lift techniques. The development of simplified high-lift systems utilizing active flow control is shown to provide significant weight and drag reduction benefits based on system studies. Active flow control that focuses on separation, and the development of advanced circulation control wings (CCW) utilizing unsteady excitation techniques will be discussed. The advanced CCW airfoils can provide multifunctional controls throughout the flight envelope. Computational and experimental data are shown to illustrate the benefits and issues with implementation of the technology.

Sellers, William L., III↗

NASA NTRS2002

A Wind Tunnel Model to Explore Unsteady Circulation Control for General Aviation Applications

Circulation Control airfoils have been demonstrated to provide substantial improvements in lift over conventional airfoils. The General Aviation Circular Control model is an attempt to address some of the concerns of this technique. The primary focus is to substantially reduce the amount of air mass flow by implementing unsteady flow. This paper describes a wind tunnel model that implements unsteady circulation control by pulsing internal pneumatic valves and details some preliminary results from the first test entry.

Cagle, Christopher M.↗

NASA NTRS2000

Research Opportunities in Advanced Aerospace Concepts

This report is a review of a team effort that focuses on advanced aerospace concepts of the 21st Century. The paper emphasis advanced technologies, rather than cataloging every unusual aircraft that has ever been attempted. To dispel the myth that "aerodynamics is a mature science" an extensive list of "What we cannot do, or do not know" was enumerated. A zeit geist, a feeling for the spirit of the times, was developed, based on existing research goals. Technological drivers and the constraints that might influence these technological developments in a future society were also examined. The present status of aeronautics, space exploration, and non-aerospace applications, both military and commercial, including enabling technologies are discussed. A discussion of non-technological issues affecting advanced concepts research is presented. The benefit of using the study of advanced vehicles as a tool to uncover new directions for technology development is often necessary. An appendix is provided containing examples of advanced vehicle configurations currently of interest.

Jones, Gregory S.↗

NASA NTRS1994

Correcting For Seed-Particle Lag In LV Measurements

Two experiments conducted to evaluate effects of sizes of seed particles on errors in LV measurements of mean flows. Both theoretical and conventional experimental methods used to evaluate errors. First experiment focused on measurement of decelerating stagnation streamline of low-speed flow around circular cylinder with two-dimensional afterbody. Second performed in transonic flow and involved measurement of decelerating stagnation streamline of hemisphere with cylindrical afterbody. Concluded, mean-quantity LV measurements subject to large errors directly attributable to sizes of particles. Predictions of particle-response theory showed good agreement with experimental results, indicating velocity-error-correction technique used in study viable for increasing accuracy of laser velocimetry measurements. Technique simple and useful in any research facility in which flow velocities measured.

Jones, Gregory S.↗

NASA NTRS1992

A comparison of calibration techniques for hot-wires operated in subsonic compressible slip flows

This paper focuses on the correlation of constant temperature anemometer voltages to velocity, density, and total temperature in the transonic slip flow regime. Three different calibration schemes were evaluated. The ultimate use of these hot-wire calibrations is to obtain fluctuations in the flow variables. Without the appropriate mean flow sensitivities of the heated wire, the measurements of these fluctuations cannot be accurately determined.

Jones, Gregory S.↗

NASA NTRS1990

The development of a 3-D laser velocimeter for the NASA Langley low turbulence pressure wind tunnel

The design of an orthogonal, three-dimensional laser velocimeter with in situ sizing (LVIS) system for a high-Reynolds-number facility, the NASA Langley low turbulence pressure wind tunnel (LTPT), is discussed. Special attention is paid to the laser velocimeter seeding subsystems, while all other subsystems are approached from the users standpoint. The evaluation of the LVIS system leads to the conclusion that seeding of large scale pressure wind tunnels remains a problem, while using the polydispersed seeding requires further investigation. A Cassegrain mirror receiver optics may be successfully implemented in lieu of similar lens systems. General agreement is observed between the mean velocity LVIS measurements as compared to conventional pitot and hot-wire data.

Jones, Gregory S.↗

NASA NTRS1990

An investigation of the effects of seeding in laser velocimeter systems

Errors in laser velocimeter measurements associated with the lag of seeding particles in subsonic and transonic flows were investigated experimentally and theoretically. In a low-speed flow, errors exceeding 5 percent were measured for particle diameters greater than 5 microns. In transonic flows, errors up to 60 percent were measured for particles with 2-3-micron diameters and up to 30 percent for 1-2-micron particles. A three-dimensional method was developed to determine the magnitude of errors due to the lag in seeding particle response based on a simplified particle force balance model and an empirical coefficient of drag model for spherical bodies. A one-dimensional version of this model was shown to be successful in correcting velocity measurements in both the subsonic and transonic flow regions.

Jones, Gregory S.↗

NASA NTRS1989

Flow quality measurements for the Langley 8-foot transonic pressure tunnel LFC experiment

Laminar flow experiments were performed in an 8-foot transonic pressure tunnel which was modified in order to simulate the conditions of an infinite span yawed wing. A liner in the tunnel provided a flow field around the yawed airfoil. The results were evaluated using hot-wire and fluctuating pressure measurements. Data were obtained for root-mean-square fluctuations, their spectra, and various cross product terms.

Jones, Gregory S.↗

NASA NTRS1988

A high speed data acquisition system for the analysis of velocity, density, and total temperature fluctuations at transonic speeds

The use of a high-speed Dynamic Data Acquisition System (DDAS) to measure simultaneously velocity, density, and total temperature fluctuations is described. The DDAS is used to automate the acquisition of hot-wire calibration data. The data acquisition, data handling, and data reporting techiques used by DDAS are described. Sample data are used to compare results obtained with the DDAS with those obtained from the FM tape and post-test digitization method.

Clukey, Steven J.↗

NASA NTRS1988

A new look at wind tunnel flow quality for transonic flows

The implementation of several transonic hot wire anemometry techniques for obtaining fluctuating data related to wind tunnel flow quality has been evaluated. An overview of the theoretical considerations, calibration techniques, and related assumptions are discussed for the data presented from the LaRC 8' Transonic Pressure Tunnel. The impact of incorrect assumptions related to hot wire sensitivities are highlighted. Velocity, density, total temperature, and mass flow results from three-element, two-element, and single-element probes are presented in rms and spectral formats. Based on these comparisons, great caution should be used when relying on flow quality information obtained utilizing hot wire techniques other than the three-element technique.

Jones, Gregory S.↗

NASA NTRS1988

Performance characteristics from wind-tunnel tests of a low-Reynolds-number airfoil

Wind tunnel lift and pitching-moment data have been obtained from pressure measurements, and drag data from wake surveys, for an Eppler 387 low Reynolds number airfoil over the Re range of 60,000 to 460,000; oil flow visualizations were also used to determine laminar separation and turbulent reattachment locations. Airfoil performance is found to be dominated by laminar separation bubbles below Re 200,000, and two flow regimes, namely laminar separations with and without turbulent reattachment, were observed at the same angle-of-attack for an Re of 60,000.

Mcghee, Robert J.↗

NASA NTRS1987

Basic aerodynamic research facility for comparative studies of flow diagnostic techniques

Current flow diagnostic research efforts are focusing on higher order flow field data bases, such as those generated by laser velocimetry (LV), hot-wire anemometry, and multi-hole pressure probes. Recent low-speed comparisons of results obtained with LV and hot wires have revealed strengths and weaknesses of each instrument. A seeding study will be initiated to determine particulate tracking ability.

Jones, Gregory S.↗