Search NASA⌕ Search

Engineering topics

Jones, Susanne B.

Publications and source records attributed to Jones, Susanne B..

11 records
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Techno-economic analysis of cellulosic ethanol conversion to fuel and chemicals

In this paper, we describe multiple scenarios investigated to assess the techno-economic results of producing fuels from corn stover-derived ethanol and the impact of co-producing higher-value, ethanol-derived n-butanol and 1,3-butadiene to improve economic feasibility. An alternative approach that produces only chemicals from the lignocellulosic-derived ethanol while producing fuels from the residual cell mass, unconverted sugars and lignin using hydrothermal liquefaction and hydrotreating also is described. Our results indicate that the hydrothermal liquefaction pathway has cost advantages relative to pathways that burn lignin from the corn stover conversion process to make ethanol when the associated ethanol stream is used to make only chemicals.

09 BIOMASS FUELS↗
DOE OSTI2021

Role of peracetic acid on the disruption of lignin packing structure and its consequence on lignin depolymerisation

Peracetic acid (PAA) is an effective oxidant capable of solubilising lignin and efficiently depolymerising it to selective phenolic compounds; however, the specific role by which PAA initiates the depolymerisation is still elusive. Herein, interaction between PAA and the lignin macromolecule and the consequent structural changes of the latter were studied by characterising the lignin packing structure and its associated changes during the oxidation process. While the lignin packing structure and its changes associated with the PAA-mediated oxidation were probed by X-ray diffraction, the impact of the PAA on different chemical functionalities present in the lignin structure was established by 13 C and 1 H– 13 C heteronuclear single-quantum coherence nuclear magnetic resonance (NMR) spectroscopy. Further, combining the NMR spectroscopy results, and the product distribution, we conclude that the predominant reaction pathway for the oxidative depolymerisation of lignin with PAA is the Baeyer–Villiger oxidation of the ketone formed by the oxidation of the benzylic hydroxyl group adjacent to the β-O-4 linkage. The experimental evidence provided herein corroborated that PAA instigates oxygen insertion to the lignin macromolecule resulting in disruption of its packing structures and facilitates depolymerisation. We also investigated various metal oxide and mixed metal oxide catalysts to identify effective catalysts that further enhance the efficiency of PAA-mediated depolymerisation of lignin and produce selective monomeric phenolic compounds. Techno-economic analysis was also conducted to identify the key parameters associated with this oxidative process that need to be considered for possible commercial application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Potential Economic Values of Low-Vapor-Pressure Gasoline-Range Bio-Blendstocks: Property Estimation, and Blending Optimization

Adding non-traditional blendstocks derived from biomass into gasoline has gained renewed interest since it will reduce greenhouse gas emissions and potentially enhance fuel properties and boost engine efficiencies. A competitive bio-blendstock candidate should have either lower prices or superior properties or both relative to conventional gasoline blending components. Gasoline is a mixture of hundreds compounds specified by properties rather than compositions. The addition of bio-blendstocks, most likely oxygenates, will modify the property mixing rules due to the non-ideal interactions between polar and nonpolar components. This paper presents an equation-of-state-based model for predicting Reid vapor pressure, reduced order non-linear property blending models for computing key properties of final gasoline products, and a blending optimization approach to identify key economic drivers. This paper also evaluates the economic values of bio-blendstocks to petroleum refiners using those models. In additional to ethanol, six low-vapor-pressure bio-blendstock candidates were evaluated: i-propanol, n-propanol, i-butanol, diisobutylene, cyclopentanone, and a mixture of furans. Reid vapor pressure, distillation temperatures, and octane numbers were identified as the key economic drivers of adding bio-blendstock. The economic values of those bio-blendstocks range from 2.22 to 4.00 US dollar per gasoline gallon equivalent in 2013 to 2017 5-year averaged price basis. The bio-blendstocks with higher octane numbers may have higher economic values. The uncertainties in property predictions may lead to roughly 15% deviation in the economic value evaluation.

Jiang, Yuan↗
DOE OSTI2021

Microalgae Conversion to Biofuels and Biochemical via Sequential Hydrothermal Liquefaction (SEQHTL) and Bioprocessing: 2020 State of Technology

A preliminary techno-economic analysis (TEA) was developed for the fiscal year 2020 state of technology (SOT) assessment to evaluate the benefits and risks for a large-scale microalga hydrothermal liquefaction (HTL) system based on most recent testing results. The focus of the study is directed toward the conversion system, which consists of five processes: two-stage sequential HTL (SEQHTL), biocrude upgrading to final fuels, bioprocessing for co-product generation, hydrogen generation, and steam cycle. In this system, algae biomass with corn stover supplement during the lower algae productivity seasons (winter, fall, and spring) to match the maximum algae seasonal production rate in summer is employed to maintain a constant plant capacity in all the seasons. Algae only (summer season) or algae/corn stover blended feedstock (other seasons) are sent to a two-stage SEQHTL process. In stage I, the carbohydrates in the feedstock are extracted and separated from the residual solid. The residual solid from stage I is further converted to biocrude in the SEQHTL stage II step. The biocrude is upgraded to final fuel products in an upgrading process. The extract stream from HTL stage I is sent to the bioprocessing section for co-product generation via fermentation of carbohydrate. Lactic acid (LA) is assumed to be the co-product based on current bioprocessing testing results.

09 BIOMASS FUELS↗
DOE OSTI2020

Biopower: Impact of Biofuels Deployment to Replace Petroleum Liquids in Stationary Power Applications

Petroleum-based liquids are used in a portion of power generation applications in the United States, predominantly in the New England, Middle Atlantic, South Atlantic, and Pacific-Noncontiguous regions. Power plants that burn petroleum liquids, such as distillate or residual fuel oils, are generally used for short periods to accommodate peak electricity demands. The Energy Information Administration (EIA) estimated the U.S. consumption of petroleum liquids for electricity generation at 27 million barrels in 2018, representing a cost of $2.4 billion annually. This study assesses the potential to displace all or part of the petroleum liquids in U.S. power generation with biofuels. The biofuels for this application are assumed to be derived from terrestrial feedstocks, with conversion routes of both fast pyrolysis (bio-oil) and hydrothermal liquefaction (bio-crude). Regional models were used to assess the availability and cost of three different base materials: clean wood, forest residues, and corn stover; each was evaluated in the laboratory at small or experimental scales for conversion to bio-oil or bio-crude. The estimated biofuel production quantities depend on equivalent heating versus the current heavy fuel. In this report, the availability of each type of biomass for each section of the U.S. Census division is estimated using a conservative broker price (in each case) of $ 80 per dry tonne. The results show that the petroleum-liquid power generation in each of the Census Divisions could be supplied by one or more of the feedstocks evaluated. For all regions, clean wood supplies (only) could provide ample supply. For all but two regions (Middle Atlantic and New England), forest residues alone are sufficient. Finally, for all regions but three (Middle Atlantic, New England, and South Atlantic), corn stover alone is adequate. The Minimum Fuel Selling Price (MFSP) of bio-oil and bio-crude were also estimated for each feedstock type and Census Division. This analysis showed that fast pyrolysis bio-oil projections to be lower (14% on average) than current wholesale petroleum-based heating oil prices in each of the regions, assuming 100 dry tonnes/day processing capacity. However, bio-crude predictions were significantly higher (2X) in all cases. The effect of biorefinery size was also quantified. Based on the preliminary results in this study, it is apparent the biofuels could be an economical alternative for current petroleum liquids in U.S. power generation. However, additional research is needed to determine the necessary biofuel characteristics to support existing generation equipment. It is recommended that both power generation and biofuel production stakeholders to be engaged to outline the research and testing needed to identify the technical hurdles to enable the opportunity.

02 PETROLEUM↗
DOE OSTI2020

Algae/Wood Blends Hydrothermal Liquefaction and Upgrading: 2019 State of Technology

The fiscal year (FY) 2019 State of Technology (SOT) Assessment for a microalgae and woody biomass blend feedstock hydrothermal liquefaction (HTL) and biocrude upgrading system has been completed and reported here. This study is a preliminary economic analysis for this system. Inputs from the 2019 NREL open pond algae cultivation model provided microalgae seasonal flowrates and dewatered algae feedstock price. These inputs have been coupled with modeled experimental data from PNNL for algae/wood blends processed via HTL to assess the cost impacts. The TEA results demonstrated a 28% reduction in the conversion cost only from $1.22/gge in 2018 to $0.88/gge in 2019.

09 BIOMASS FUELS↗
DOE OSTI2020

Wet Waste Hydrothermal Liquefaction and Biocrude Upgrading to Hydrocarbon Fuels (2019 State of Technology)

Each year, the DOE Bioenergy Technologies Office (BETO) assesses progress in their research and development efforts toward sustainable production of renewable fuels. Technical and cost targets were previously established for the wet waste hydrothermal liquefaction and biocrude upgrading pathway and summarized in a design report. The present report summarizes the research and associated techno-economic analysis (TEA) in support of the 2019 state of technology (SOT) assessment for this pathway. Data from Pacific Northwest National Laboratory’s Conversion hydrothermal liquefaction (HTL) program for wet waste was used to update the pathway techno-economic analysis (TEA) for the fiscal year 2019 State of Technology (2019 SOT). An overview of the current process model, experimental data and plant economics for the SOT is presented.

09 BIOMASS FUELS↗
DOE OSTI2020

Bioprocessing Separations Consortium: Three-Year Overview - Technical Advances, Process Economics Influence, and State of the Science

The Bioprocessing Separations Consortium solves separations challenges that are unique to bioprocessing. To do this, the Consortium uses two methods: applying existing technologies to new challenges and developing new technologies that may address these unique challenges better than today’s commercial technologies. In its research and development, the Consortium leverages its three core capabilities: materials development and evaluation, process development, and analysis and computation. In its first three years, from 2016 to 2019, the Consortium addressed four critical challenges in biochemical and thermochemical processing. First, the Consortium targeted the fractionation of lignin to enable valorization of this portion of biomass that offers diverse, complex, and valuable building blocks and products. Second, Consortium researchers developed technologies to enable process intensification, which can reduce equipment needs, energy consumption, and waste generation, thereby cutting bioprocessing capital costs and rendering processes more efficient. Third, the Consortium sought to recover carbon from dilute aqueous streams that are common to bioprocessing; recovering dilute carbon can improve process efficiency and economics. Finally, Consortium researchers designed and developed new materials and catalysts to reduce targeted foulants and poisons in bioprocessing streams that can limit the lifetime of downstream catalysts or fermenting microorganisms. Table 1 lists the technologies that were examined and places them in the context of the Consortium’s capabilities, types of bioprocesses, and critical challenges in bioprocessing separations. Overall, across these projects, we have developed separations technologies for 10 bioprocesses, addressed 9 target compounds in bioprocessing, developed 10 materials, and evaluated 4 processes for cost and sustainability.

09 BIOMASS FUELS↗