Search NASA⌕ Search

Engineering topics

Jones, T. S.

Publications and source records attributed to Jones, T. S..

Bi-induced band gap reduction in epitaxial InSbBi alloys

The properties of molecular beam epitaxy-grown InSb{sub 1−x}Bi{sub x} alloys are investigated. Rutherford backscattering spectrometry shows that the Bi content increases from 0.6% for growth at 350 °C to 2.4% at 200 °C. X-ray diffraction indicates Bi-induced lattice dilation and suggests a zinc-blende InBi lattice parameter of 6.626 Å. Scanning electron microscopy reveals surface InSbBi nanostructures on the InSbBi films for the lowest growth temperatures, Bi droplets at intermediate temperatures, and smooth surfaces for the highest temperature. The room temperature optical absorption edge was found to change from 172 meV (7.2 μm) for InSb to ∼88 meV (14.1 μm) for InSb{sub 0.976}Bi{sub 0.024}, a reduction of ∼35 meV/%Bi.

36 MATERIALS SCIENCE↗

Temperature dependence of the band gap of GaSb{sub 1−x}Bi{sub x} alloys with 0 < x ≤ 0.042 determined by photoreflectance

GaSb{sub 1−x}Bi{sub x} layers with 0 < x ≤ 0.042 have been studied by photoreflectance in 15–290 K temperature range. We found that due to the incorporation of Bi atoms into the GaSb host, the E{sub 0} band gap-related transition redshifts (∼30 meV per 1% Bi) and significantly broadens. The shift of the E{sub 0} transition in the temperature range 10–270 K has been found to be ∼70 meV, very similar to the energy shift in GaSb over the same temperature range. We analyzed the energy and broadening of the E{sub 0} transition using the Varshni and Bose-Einstein formulas and found that the Varshni and Bose-Einstein parameters of GaSb{sub 1−x}Bi{sub x} are similar to those of GaSb. Moreover we concluded that the inhomogeneities in GaSb{sub 1−x}Bi{sub x} alloys is less important than in dilute bismide arsenides since Bi atoms are more similar to Sb atoms (in electronegativities and ionic sizes)

36 MATERIALS SCIENCE↗

Determination of the individual atomic site contribution to the electronic structure of 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA)

We have studied the element and orbital-specific electronic structure of thin films of 3,4,9,10-perylene-tetracarboxylic-dianhydride (PTCDA) using a combination of synchrotron radiation-exited resonant x-ray emission spectroscopy, x-ray absorption spectroscopy, x-ray photoelectron spectroscopy, as well as density functional theory calculations. Resonant and non-resonant x-ray emission spectroscopies were used to measure the C and O 2p partial densities of state in PTCDA. Furthermore, resonant x-ray emission at the C and O K-edges is shown to be able to measure the partial densities of states associated with individual atomic sites. The flat molecular orientation of PTCDA on various substrates is explained in terms of the carbonyl O atom acting as a hydrogen-bond acceptor leading to multiple in-plane intermolecular C=O···H−C hydrogen bonding between carbonyl groups and the perylene core of the neighboring PTCDA molecules. We support this conclusion by comparison of our calculations to measurements of the electronic structure using element-, site-, and orbital-selective C and O K-edge resonant x-ray emission spectroscopy, and photoemission spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Growth and properties of GaSbBi alloys

Molecular-beam epitaxy has been used to grow GaSb{sub 1−x}Bi{sub x} alloys with x up to 0.05. The Bi content, lattice expansion, and film thickness were determined by Rutherford backscattering and x-ray diffraction, which also indicate high crystallinity and that >98% of the Bi atoms are substitutional. The observed Bi-induced lattice dilation is consistent with density functional theory calculations. Optical absorption measurements and valence band anticrossing modeling indicate that the room temperature band gap varies from 720 meV for GaSb to 540 meV for GaSb{sub 0.95}Bi{sub 0.05}, corresponding to a reduction of 36 meV/%Bi or 210 meV per 0.01 Å change in lattice constant.

36 MATERIALS SCIENCE↗

N incorporation in GaInNSb alloys and lattice matching to GaSb

The incorporation of N into MBE grown GaNSb and GaInNSb is investigated. Measurements of the N fraction in GaNSb show the familiar linear dependence on inverse growth rate, followed by a departure from this at low growth rates; a similar behaviour is observed for GaInNSb. Unexpectedly, the point at which there is a departure from this linear behaviour is found to be extended to lower growth rates by the addition of small amounts of In. These results are compared to a kinetic theory-based model from which it is postulated that the change in behaviour can be attributed to an In-induced change in the characteristic surface residence lifetime of the N atoms. In addition, a method is demonstrated for growing GaInNSb lattice-matched to GaSb(001) for compositions with band gaps covering the 2-5 {mu}m region.

36 MATERIALS SCIENCE↗