Engineering topics

Jongeward, Gary A.

Publications and source records attributed to Jongeward, Gary A..

7 records

NASA NTRS1994

Auroral interactions with ISSA

Due to its high inclination orbit, International Space Station Alpha (ISSA) will occasionally experience surface charging by the high energy electrons of the auroral environment. This study looks at the frequency of these occurrences and recapitulates a charging model. ISSA should expect about 80 auoral encounters annually. If the plasma contactor is not run continuously, the vehicle may charge several hundred volts. Charge storage on standard space station coatings should not be a problem, but care must be taken that materials are not introduced inadvertently that cannot bleed off accumulated charge in a reasonable time. A conductivity requirement may be used to ensure surface materials do not charge to high voltages, or store charge for long periods of time.

Purvis, Carolyn K.↗

NASA NTRS1992

Extrapolation of electrical breakdown currents from the laboratory to Space Station

Recent experiments conducted in a plasma chamber at NASA/MSFC on anodized aluminum coatings representative of Space Station Freedom design show that if the aluminum used as a thermal control coating is biased more than 80 V negative with respect to the plasma, the anodization will experience dielectric breakdown. As the thin anodization layer creates a capacitive charge buildup, large currents are observed during the arc. How plasma generation at the arc site can support large currents and discharge the surface charge layer is investigated. The importance for Space Station Freedom is that currents similar to those observed in the laboratory can be observed on orbit.

Vaughn, Jason A.↗

NASA NTRS1991

The environment workbench: A design tool for Space Station Freedom

The environment workbench (EWB) is being developed for NASA by S-CUBED to provide a standard tool that can be used by the Space Station Freedom (SSF) design and user community for requirements verification. The desktop tool will predict and analyze the interactions of SSF with its natural and self-generated environments. A brief review of the EWB design and capabilities is presented. Calculations using a prototype EWB of the on-orbit floating potentials and contaminant environment of SSF are also presented. Both the positive and negative grounding configurations for the solar arrays are examined to demonstrate the capability of the EWB to provide quick estimates of environments, interactions, and system effects.

Jongeward, Gary A.↗

NASA NTRS1991

Using EPSAT to analyze high power systems in the space environment

The authors review the Environment Power System Analysis Tool (EPSAT) design and demonstrate its capabilities by using it to address some questions that arose in designing the SPEAR III experiment. It is shown that that the rocket body cannot be driven to large positive voltages under the constraints of this experiment. Hence, attempts to measure the effects of a highly positive rocket body in the plasma environment should not be made in this experiment. It is determined that a hollow cathode will need to draw only about 50 mA to ground the rocket body. It is shown that a relatively small amount of gas needs to be released to induce a bulk breakdown near the rocket body, and this gas release should not discharge the sphere. Therefore, the experiment provides an excellent opportunity to study the neutralization of a differential charge.

Kuharski, Robert A.↗

NASA NTRS1990

The environment power system analysis tool development program

The Environment Power System Analysis Tool (EPSAT) is being developed to provide space power system design engineers with an analysis tool for determining system performance of power systems in both naturally occurring and self-induced environments. The program is producing an easy to use computer aided engineering (CAE) tool general enough to provide a vehicle for technology transfer from space scientists and engineers to power system design engineers. The results of the project after two years of a three year development program are given. The EPSAT approach separates the CAE tool into three distinct functional units: a modern user interface to present information, a data dictionary interpreter to coordinate analysis; and a data base for storing system designs and results of analysis.

Jongeward, Gary A.↗

NASA NTRS1990

High voltage interactions of a sounding rocket with the ambient and system-generated environments

EPSAT (environment power system analysis tool) is used to examine the design of SPEAR III, which is scheduled to fly in early 1991. It will test high-voltage designs in both ambient and system-generated environments. Two of the key questions that the experiment hopes to address are whether or not the earth's magnetic field can cause the current that a high-voltage object draws from the plasma to be far less than the current that would be drawn in the absence of the magnetic field and under what neutral environmental conditions a discharge from the high-voltage object to the plasma will occur. The EPSAT program makes it possible to perform a variety of analyses on a preliminary or conceptual-level description of a system in a short period of time. The calculations presented on SPEAR III are all done for a conceptual-level description. The calculations indicate that the experiment will produce the conditions necessary to address these questions.

Kuharski, Robert A.↗

NASA NTRS1989

The Environment-Power System Analysis Tool development program

The Environment Power System Analysis Tool (EPSAT) is being developed to provide engineers with the ability to assess the effects of a broad range of environmental interactions on space power systems. A unique user-interface-data-dictionary code architecture oversees a collection of existing and future environmental modeling codes (e.g., neutral density) and physical interaction models (e.g., sheath ionization). The user-interface presents the engineer with tables, graphs, and plots which, under supervision of the data dictionary, are automatically updated in response to parameter change. EPSAT thus provides the engineer with a comprehensive and responsive environmental assessment tool and the scientist with a framework into which new environmental or physical models can be easily incorporated.

Jongeward, Gary A.↗