Engineering topics

Jorns, Benjamin A.

Publications and source records attributed to Jorns, Benjamin A..

At least 19 records

NASA NTRS2021

Self-Consistent Implementation of a Zero-Equation Transport Model Into a Predictive Model for a Hall Effect Thruster

The performance of an axisymmetric multi-fluid Hall thruster code that incorporates a self-consistent, data-driven closure model for the anomalous electron transport is investigated. Five different operating conditions of the H9 magnetically shielded Hall thruster are simulated with the Jet Propulsion Laboratory’s Hall2De. In order to capture the inherent uncertainty associated with the closure model, O(100) simulations are run for each condition, each of using a coefficient set sampled randomly from a probability distribution. The results of these simulations provide probabilistic predictions of thruster performance quantities including thrust, and discharge current, as well as several component efficiencies and centerline plasma properties. The model is found to yield converged solutions at all conditions, with large 10 kHzrange oscillations and performance trends with voltage and flow rate similar to experiment. The model under-predicts the thrust by 15-25% and over-predicts the discharge current by 20% on average compared to experiments at the same discharge voltage and mass flow rate. This performance discrepancy is due to lower beam utilization, mass utilization, and divergence efficiency than experiment, resulting from high Hall parameters in the acceleration region, which lead to a protracted ion acceleration region. The physical processes underlying this result are discussed in the context of future data-driven modeling efforts.

Jorns, Benjamin A.↗

NASA NTRS2020

Hall2De Simulations of a Magnetic Nozzle

The two-dimensional, fluid-based Hall thruster code Hall2De is adapted to simulate a low temperature propulsive magnetic nozzle. Electron cyclotron resonance (ECR) thrusters developed at the Office National d’Etudes et de Recherches Aérospatiales (ONERA) in France and the University of Michigan are investigated. For each device, the simulated domain is defined from the nozzle throat to a location 10 thruster radii downstream. A numerical mesh is defined based on the measured magnetic field, and the governing fluid equations for singlycharge ions, electrons, and neutrals are solved. The boundary conditions for the throat of the magnetic nozzle are based on measured values of electron temperature and ion velocity. Multiple boundary conditions for the electron temperature in the downstream regions of the domain are considered. The simulated ion velocity and potential agrees well with experiment, while the simulated divergence efficiencies and thrusts are 25% lower and 45-55% higher than experiment. When a Neumann boundary condition for electron temperature is applied to the far-plume boundaries, the nozzle was seen to be purely isothermal. This suggests that the thermal conductivity along field lines in real devices is much lower than classical simulations predict, and anomalous resistivity may be needed to reproduce the temperature distribution observed in experiment. The larger beam divergence observed in our simulation may also be related to the lack of anomalous resistivity.

Jorns, Benjamin A.↗

NASA NTRS2019

Model for the Increase in Thruster Efficiency from Cross-Channel Coupling in Nested Hall Thrusters

Multi-channel operation in nested Hall thrusters has been experimentally shown to enhance thruster efficiency compared to single-channel operation at constant power. This is the result of higher local neutral density due to the flow from adjacent channels, leading to two effects: neutral ingestion and decreased plume divergence. Analytical expressions for the impact of these cross-channel effects on efficiency are derived for a nested Hall thruster based on the flow of neutrals between channels. These expressions are dependent on the geometry and operation of a given thruster, as well as its performance in single-channel operation. The mass utilization efficiency increase from cross-channel neutrals is found to be primarily driven by the distance between adjacent channels. A comparison of the model predictions of efficiency to experiment also shows agreement within uncertainty. These results are discussed in the context of best practices for nested Hall thruster channel testing and optimal thruster design.

Nested Hall Thruster↗

NASA NTRS2018

Update on the Nested Hall Thruster Subsystem for the NextSTEP XR-100 Program

Under the NextSTEP program led by Aerojet Rocketdyne in collaboration with NASA Glenn Research Center the University of Michigan, and the Jet Propulsion Laboratory, the XR-100 100 kW Electric Propulsion system is being developed to Technology Readiness Level (TRL) 5. As part of this program, the X3, a Nested Hall Thruster (NHT) designed to operate at powers up to 200kW, is being further developed through parallel modeling and experimental efforts with the ultimate goal of supporting a 100kW-100hr system test in the final year of the NextSTEP program. Recent developments for the X3 subsystem are presented including a summary of testing and modeling results and design updates in anticipation of a risk reduction test scheduled for the summer of 2018.

Jorns, Benjamin A.↗

NASA NTRS2018

Update on the Nested Hall Thruster Subsystem for the NextSTEP XR-100 Program

Jorns, Benjamin A.↗

NASA NTRS2017

High-Power Performance of a 100-kW Class Nested Hall Thruster

Operations of a three-channel 100-kW class nested Hall thruster at total power levels from 5 to 102 kW and discharge currents from 16 to 247 A were successful. The thruster was operated in all seven available channel combinations at discharge voltages of 300, 400, and 500 V and at current densities that were 0.60 and 0.95 of the nominal value. Additional test points were also collected at 1.20 the nominal current density. The thruster was throttled through a total of forty-six unique operating conditions. At each condition, thruster performance was measured using a high-power thrust stand designed to measure up to 8 N of thrust. From these thrust measurements, specific impulse and efficiency were calculated. All seven channel combinations showed similar performance at a given discharge voltage and current density. The largest thrust recorded was 5.42 N at 99 kW, 400 V discharge voltage. Total efficiency values 0.54 to 0.67, and total specific impulse ranged from 1800 seconds to 2650 seconds. Discharge current oscillations were also measured. Generally these oscillations increased on the inner and middle channels during multi-channel mode but stayed roughly a constant fraction of the channel discharge current for the outer channel in both single- and multi-channel operation. We also found that the thrust of the three channels firing together was not significantly higher than the sum of each channel _ring individually, a result that differs from what was found previously for nested Hall thrusters.

Hall, Scott J.↗

NASA NTRS2016

Hall2De Simulations with a First-Principles Electron Transport Model Based on the Electron Cyclotron Drift Instability

Several years of work have combined plasma measurements in a laboratory Hall thruster and r-z numerical simulations with Hall2De to isolate the spatial variation of the anomalous collision frequency needed in Ohm’s law to produce the observed thruster behavior. This numerical solution is used here to test the validity of a first-principles model of the anomalous transport in these devices before such model is implemented self-consistently in r-z fluid codes like Hall2De. The first-principles model employs quasi-linear theory and is based on the hypothesis that the Electron Cyclotron Drift Instability (ECDI) excites ion acoustic turbulence that, in turn, enhances the effective collision frequency in these devices. We find that a model of the ECDI that assumes Maxwellian velocity distributions for electrons and singly-charged, main-beam, cold ions (Ti=0.07 eV) is insufficient to explain the expected variation of the anomalous collision frequency both in the interior and exterior of the acceleration channel. When warm ions (~0.5-3 eV) are accounted for, the ECDI model in the channel interior appears more promising but fails by orders of magnitude in the near plume region due to the much higher Landau damping of the ion acoustic waves there. This implies that either (a) some process allows the ECDI instability to remain uninhibited by classical Landau damping or, (b) that a different instability (or instabilities) altogether, also insusceptible to Landau damping, is/are active in this region. A previous hypothesis, that convection of wave energy generated by the ECDI in the channel plays a significant role in the near plume, is not supported by the results of the simulations.

Mikellides, Ioannis G.↗

NASA NTRS2016

Mechanisms for Pole Piece Erosion in a 6-kW Magnetically-Shielded Hall Thruster

The mechanisms contributing to the erosion of the inner magnetic pole of a 6-kW magnetically shielded Hall thruster are experimentally and numerically investigated. Sputtering from ion bombardment is believed to be the cause of this wear, but the nature and source of the responsible ions remains unknown. Laser induced fluorescence and translating and surface-mounted probes are employed to characterize the flux and energy distribution of ions incident at the inner pole. It is found that the bulk population is comprised of ions originating from the cathode plume and the near field immediately adjacent to the inner pole. These ions have a low average kinetic energy, < 5 eV kinetic, but a high thermal spread in velocity, Ti = 10 eV. Calculations for the erosion at the pole from experimental measurements indicate that the bulk population only accounts for 10-25% of the observed erosion. It is postulated that the remainder of the erosion results from a separate population of ions with sufficiently high energy (> 150 V) to cause high sputtering but too low density to be detected experimentally by the plasma diagnostics in this region. The existence for this high energy population is shown to be a consequence of the high plasma potentials downstream of the thruster exit plane that are characteristic of a magnetically-shielded topography. A simulation validated by experimental measurements of the thruster provides further evidence that a high energy ion populations exists with sufficient density to explain the observed erosion.

Jorns, Benjamin A.↗

NASA NTRS2016

First-Principles Modeling of IAT-Driven Anomalous Resistivity in Hollow Cathode Discharges II: Numerical Simulations and Comparisons with Experiments

We present a model that quantifies the magnitude of the ion-acoustic turbulence (IAT) in the plume of hollow cathodes and its effect on the resistivity and ion heating. The model takes the form of a partial differential equation (PDE) that can be solved concurrently with the equations of motion for a partially ionized plasma already included in our numerical code for the simulation of the plasma discharge in hollow cathodes, OrCa2D. We also determine that self-induced magnetic fields are not negligible in hollow cathodes operating at large discharge currents and implement in our code Ampere’s law and modifications to Ohm’s law that account for this effect. Numerical simulations that employed these models show large improvements in our agreement with experimental measurements with respect to a previous model, which assumed complete saturation of the IAT and did not account for the growth stage of the waves. In particular, the model is able to accurately predict the location and magnitude of the maximum resitivity to the electron current along the cathode centerline.

Lopez Ortega, Alejandro↗

NASA NTRS2016

Growth and Saturation of Ion Acoustic Waves in Hall Thrusters

In this paper we present for the first time a conjecture that the electron transport in Hall thrusters is controlled by ion acoustic waves in two distinct ion populations. The first, and largest population, is the main beam, an ion fluid generated upstream of the Acceleration Region. These ions experience electrons with largest ExB drift, but because beam ions have been heated during the ionization process, Landau damping limits the growth of ion acoustic waves. The second population is composed of ions generated at low potentials farther downstream that don’t thermalize with the fast moving ion beam. The existence of this separate population has been recognized for decades as the source of the high angle ions in Hall thruster plumes. Because these ions aren’t heated and have velocities much different from main beam ions, the amplitude of ion acoustic waves in this population is not Landau damped and grows to saturation. Scattering from these waves reduces the Hall parameter in the near plume where slow ions make up a significant fraction of the population.

Katz, Ira↗

NASA NTRS2016

Wear Test Demonstration of a Technique to Mitigate Keeper Erosion in a High-Current LaB6 Hollow Cathode

The results of a wear test on a 100-A LaB6 hollow cathode are presented as verification of a technique to mitigate keeper erosion caused by sputtering from anomalously high-energy ions. The ions responsible for this erosion have been theorized to result from the onset ion acoustic turbulence in the plume of the cathode. The proposed technique to minimize the erosion relies on identifying operating conditions where the energy of the ion acoustic turbulence is low. 100 hour wear tests are conducted on a high-current hollow cathode with a molybdenum keeper at three operating conditions: two with low turbulence levels and one with high turbulence levels. It is demonstrated that the keeper exhibits low levels erosion (at a peak erosion rate of around 0.035 um/hour) that can be explained by classical mechanisms at the low turbulence states, and anomalously high sputtering (at a peak erosion rate of.07 um/hour) at the high erosion state.

Ho, Amanda K.↗

NASA NTRS2016

Laser-Induced Fluorescence Measurements of Energetic Ions in a 100-A LaB6 Hollow Cathode

Increasingly long-duration space missions require a better understanding of the failure mechanisms of hollow cathodes to enable prediction of lifetime. Energetic ions have been measured in the plume of hollow cathodes but the energies are higher than can be explained classically. One of the mechanisms that appears to be contributing to the ion heating is ion acoustic turbulence (IAT), which has been investigated with plasma probes recently at JPL. In this work the ion velocity distribution has been measured using laser-induced fluorescence (LIF) at several high-current operating conditions on the centerline of a 100 A class hollow cathode at JPL. A retarding potential analyzer was (RPA) was used to measure the ion energy profile in the far plume and a Langmuir probe was used to measure electron temperature and plasma potential fluctuations. RPA energies are shown to correlate with the values measured by LIF. The ion temperature is shown to increase with distance downstream of the cathode. A parametric study of the ion heating as a function of discharge current and cathode flow rate was performed. It was found that for increasing current the ion temperature evolution did not vary even though the wave IAT wave energy increased. The effect of flow rate was more pronounced, with higher values reducing both ion temperature and wave energy linearly. These results indicate that IAT is at least partially responsible for energetic ion production in the hollow cathode plume.

Dodson, Christopher A.↗

NASA NTRS2016

First-Principles Modeling of IAT-Driven Anomalous Resistivity in Hollow Cathode Discharges I: Theory

Self-consistent expressions are derived for the impact of ion acoustic turbulence (IAT) on the fluid properties of electrons and ions in the plume of a hollow cathode. This instability is believed to have a dominant role in the plasmadynamics in this region. The random phase approximation is applied to the perturbed Boltzmann equation to determine the effective drag and heating of the plasma species induced by the IAT. These driving terms are then incorporated into momentum and energy fluid equations for the ions and electrons. A fluid-like relation governing the evolution of the total IAT wave energy density is also presented. The physical significance of the IAT-based terms is discussed in the context of energy and momentum conservation, and a path forward is outlined for implementing the effects of IAT in the fluid-based model in Part II.

Jorns, Benjamin A.↗

NASA NTRS2016

Effect of Solar Array Plume Interactions on Hall Thruster Cathode Common Potentials

In typical implementations of spacecraft electric propulsion (EP) systems the electrical ground of the EP power processing units are resistively isolated from the main spacecraft electrical ground. Telemetry measuring the potential difference between EP power processing unit and the spacecraft electrical ground is usually referred to as the “cathode common” potential. In this paper we review flight and laboratory data on natural and EP generated plasma interactions with solar arrays, present the theory of spacecraft floating potentials, show how this theory is consistent with flight data, and extend this theory to spacecraft with high power Hall effect thrusters.

Katz, Ira↗

NASA NTRS2015

Numerical Simulations of the XR-5 Hall Thruster for Life Assessment at Different Operating Conditions

NASA's Jet Propulsion Laboratory has been investigating the applicability of Aerojet Rocketdyne's XR-5 thruster, a 4.5 kW class Hall thruster, for deep-space missions. Major considerations for qualifying the XR-5 for deep-space missions are demonstration of a wide throttling envelope and a usable life capability in excess of 10,000 h. Numerical simulations with the 2-D axisymmetric code Hall2De are employed to inform the qualification process by assessing erosion rates at the thruster surfaces in a wide range of throttling conditions without the need for conducting costly endurance testing. In previous work at JPL by Jorns et al., the anomalous collision frequency distribution for 11 different throttling conditions of the XR-5 spanning 0.3-4.5 kW were identified based on probe measurements of the electron temperature in the near plume region. In this paper, we provide estimates for the erosion rates at the channel walls and pole covers for the same 11 conditions. Uncertainties in the plasma measurements and in the anomalous collision frequency distribution are addressed by determining upper and lower bounds of the erosion rates. Results suggest that erosion of the walls only occurs in the last 5% of the acceleration channel and the rate of such erosion decreases as the geometry of the thruster changes in time due to magnetic shielding. A quasi-zero-erosion state is eventually achieved in all the examined throttling conditions. Examination of the results for pole surface erosion and estimated cathode life indicates that the XR-5 propellant throughput capability will exceed 700 kg, which provides 50% margin over the usable throughput capability of 466 kg as already demonstrated in wear testing.

Lopez Ortega, Alejandro↗

NASA NTRS2015

Low-Power Operation and Plasma Characterization of a Qualification Model SPT-140 Hall Thruster for NASA Science Missions

Hall thruster systems based on commercial product lines can potentially lead to lower cost electric propulsion (EP) systems for deep space science missions. A 4.5-kW SPT-140 Hall thruster presently under qualification testing by SSL leverages the substantial heritage of the SPT-100 being flown on Russian and US commercial satellites. The Jet Propulsion Laboratory is exploring the use of commercial EP systems, including the SPT-140, for deep space science missions, and initiated a program to evaluate the SPT-140 in the areas of low power operation and thruster operating life. A qualification model SPT-140 designated QM002 was evaluated for operation and plasma properties along channel centerline, from 4.5 kW to 0.8 kW. Additional testing was performed on a development model SPT-140 designated DM4 to evaluate operation with a Moog proportional flow control valve (PFCV). The PFCV was commanded by an SSL engineering model PPU-140 Power Processing Unit (PPU). Performance measurements on QM002 at 0.8 kW discharge power were 50 mN of thrust at a total specific impulse of 1250 s, a total thruster efficiency of 0.38, and discharge current oscillations of under 3% of the mean current. Steady-state operation at 0.8 kW was demonstrated during a 27 h firing. The SPT-140 DM4 was operated in closed-loop control of the discharge current with the PFCV and PPU over discharge power levels of 0.8-4.5 kW. QM002 and DM4 test data indicate that the SPT-140 design is a viable candidate for NASA missions requiring power throttling down to low thruster input power.

Garner, Charles E.↗

NASA NTRS2015

Plasma Perturbations in High-Speed Probing of Hall Thruster Discharge Chambers: Quantification and Mitigation

An experimental investigation is presented to quantify the effect of high-speed probing on the plasma parameters inside the discharge chamber of a 6-kW Hall thruster. Understanding the nature of these perturbations is of significant interest given the importance of accurate plasma measurements for characterizing thruster operation. An array of diagnostics including a high-speed camera and embedded wall probes is employed to examine in real time the changes in electron temperature and plasma potential induced by inserting a high-speed reciprocating Langmuir probe into the discharge chamber. It is found that the perturbations onset when the scanning probe is downstream of the electron temperature peak, and that along channel centerline, the perturbations are best characterized as a downstream shift of plasma parameters by 15-20% the length of the discharge chamber. A parametric study is performed to investigate techniques to mitigate the observed probe perturbations including varying probe speed, probe location, and operating conditions. It is found that the perturbations largely disappear when the thruster is operated at low power and low discharge voltage. The results of this mitigation study are discussed in the context of recommended methods for generating unperturbed measurements of the discharge chamber plasma.

Jorns, Benjamin A.↗

NASA NTRS2014

Mode Transitions in Magnetically Shielded Hall Effect Thrusters

A mode transition study is conducted in magnetically shielded thrusters where the magnetic field magnitude is varied to induce mode transitions. Three different oscillatory modes are identified with the 20-kW NASA-300MS-2 and the 6-kW H6MS: Mode 1) global mode similar to unshielded thrusters at low magnetic fields, Mode 2) cathode oscillations at nominal magnetic fields, and Mode 3) combined spoke, cathode and breathing mode oscillations at high magnetic fields. Mode 1 exhibits large amplitude, low frequency (1-10 kHz), breathing mode type oscillations where discharge current mean value and oscillation amplitude peak. The mean discharge current is minimized while thrust-to-power and anode efficiency are maximized in Mode 2, where higher frequency (50-90 kHz), low amplitude, cathode oscillations dominate. Thrust is maximized in Mode 3 and decreases by 5-6% with decreasing magnetic field strength. The presence or absence of spokes and strong cathode oscillations do not affect each other or discharge current. Similar to unshielded thrusters, mode transitions and plasma oscillations affect magnetically shielded thruster performance and should be characterized during system development.

Ground Tests↗