Search NASA⌕ Search

Engineering topics

Joseph A Nuth

Publications and source records attributed to Joseph A Nuth.

7 records
All sourcesNASA NTRSDOE OSTI
NASA NTRS2021

The Formation of Carbonaceous Material in the Early Solar Nebula: The Role of Metal Dusting

For many years it has been suggested that the carbonaceous material found in association with Fe/Ni metal and metal carbides in primitive bodies is linked to the Fischer–Tropsch reaction. This is especially true with chondritic-porous interplanetary dust particles, which are considered to have a cometary origin and are among some of the most primitive and least processed materials available for study. Another phenomenon which occurs under the same carburizing conditions as the Fischer–Tropsch reaction is called metal dusting and could be a possible pathway to forming some of the carbonaceous material found in primitive bodies. Metal dusting is a catastrophic corrosion of metal under these carburizing conditions that results in a porous mixture of carbonaceous material, metal, and metal carbides. In the case of pure iron, type I metal dusting results in the formation of a metastable iron carbide, typically cementite, Fe3C. While metal dusting has been studied industrially for over 50 years, it does not appear to have been applied to the formation of carbonaceous material in astrophysical settings. In this work, the general mechanism of metal dusting on iron is described and a thermodynamic analysis of the dusting phenomena applied to solar nebula conditions. Rate measurements are made with pure iron samples over the temperature range from 400°C to 950°C. In addition, the products from experimental runs at 500°C and 600°C are studied by transmission electron microscopy. Results show that iron carbide particles are formed with carbonaceous material consisting of poorly graphitized carbon.

Interplanetary dust↗
NASA NTRS2020

Grain Formation around the AGB Star L2 Puppis Based On ALMA Observations

While models of grain formation in the outflows of carbon-rich stars have been relatively successful, models of outflows from oxygen-rich, asymptotic giant branch stars have been less fortunate. Under current modeling, it is difficult to produce sufficient amounts of silicate grains with high enough opacity to form a dust-driven wind from these stars. To investigate the cause of this difference, this work is a comparison between typical outflow model results and a model using input from Atacama Large Millimeter/submillimeter Array observations of L2Puppis. The temperatures from these observations are much lower than would typically be used in the standard outflow model. In addition, the observed gas densities are much higher than predicted from typical outflow models. Both of these differences make the formation of silicate grains much more favorable than predicted in current outflow models. We then explore the effects of other possible nonideal conditions including the efficiency of cluster growth prior to nucleation, the efficiency of grain growth following nucleation and the variation of grain coupling to stellar radiation during grain growth. Finally, we calculate the potential enhancement in grain production based on possible increased refractory abundances resulting from the vaporization of millimeter-scale and larger particles left over from the presence of a former planetary system.

Joseph A Nuth↗
NASA NTRS2020

Did a Complex Carbon Cycle Operate in the Inner Solar System?

Solids in the interstellar medium consist of an intimate mixture of silicate and carbonaceous grains. Because 99% of silicates in meteorites were reprocessed at high temperatures in the inner regions of the Solar Nebula, we propose that similar levels of heating of carbonaceous materials in the oxygen-rich Solar Nebula would have converted nearly all carbon in dust and grain coatings to CO. We discuss catalytic experiments on a variety of grain surfaces that not only produce gas phase species such as CH4, C2H6, C6H6, C6H5OH, or CH3CN, but also produce carbonaceous solids and fibers that would be much more readily incorporated into growing planetesimals. CH4 and other more volatile products of these surface-mediated reactions were likely transported outwards along with chondrule fragments and small Calcium Aluminum-rich Inclusions (CAIs) to enhance the organic content in the outer regions of the nebula where comets formed. Carbonaceous fibers formed on the surfaces of refractory oxides may have significantly improved the aggregation efficiency of chondrules and CAIs. Carbonaceous fibers incorporated into chondritic parent bodies might have served as the carbon source for the generation of more complex organic species during thermal or hydrous metamorphic processes on the evolving asteroid.

Joseph A Nuth↗
NASA NTRS2017

Options and Uncertainties in Planetary Defense: Mission Planning and Vehicle Design for Flexible Response

This paper is part of an integrated study by NASA and the NNSA to quantitatively understand the response timeframe should a threatening Earth-impacting near-Earth object (NEO) be identified. The two realistic responses considered are the use of a spacecraft functioning as either a kinetic impactor or a nuclear explosive carrier to deflect the approaching NEO. The choice depends on the NEO size and mass, the available response time prior to Earth impact, and the various uncertainties. Whenever practical, the kinetic impactor is the preferred approach, but various factors, such as large uncertainties or short available response time, reduce the kinetic impactor's suitability and, ultimately, eliminate its sufficiency. Herein we examine response time and the activities that occur between the time when an NEO is recognized as being a sufficient threat to require a deflection and the time when the deflection impulse is applied to the NEO. To use a kinetic impactor for successful deflection of an NEO, it is essential to minimize the reaction time and maximize the time available for the impulse delivered to the NEO by the kinetic impactor to integrate forward in time to the eventual deflection of the NEO away from Earth impact. To shorten the response time, we develop tools to survey the profile of needed spacecraft launches and the possible mission payloads. We further present a vehicle design capable of either serving as a kinetic impactor, or, if the need arises, serving as a system to transport a nuclear explosive to the NEO. These results are generated by analyzing a specific case study in which the simulated Earth-impacting NEO is modeled very closely after the real NEO known as 101955 Bennu (1999 RQ36). Bennu was selected for our case study in part because it is the best-studied of the known NEOs. It is also the destination of NASA's OSIRIS-REx sample return mission, which is, at the time of this writing, enroute to Bennu following a September 2016 launch.

Brent W. Barbee↗
NASA NTRSDate not supplied

Inefficient Growth of Refractory Grains: Implications for Grains in the Solar Nebula

Introduction: We report the results of a sounding rocket experiment in which SiO nucleation and growth in an argon atmosphere was observed in microgravity starting from a vapor generated by evaporation of waterglass deposited on a heated Ta wire. The temperature and pressure at the point of nucleation was determined using a double wavelength Mach–Zehnder-type interferometer. The particle composition and grain size distribution were measured after payload recovery using a Transmission Electron Microscope (TEM; JEM-2100F. JEOL Ltd., Tokyo). The results were analyzed using Modified Classical Nucleation Theory (MCNT)[1]. We report a measurement of the SiO-silicate grain sticking coefficient of 0.016, indicating very inefficient grain growth from the vapor. In other words, for every 100 SiO molecules that collide with a growing grain only one to two are captured. In the only two previous studies of the growth of solid particles from the gas phase the calculated sticking coefficients were much lower. For zinc atoms colliding with zinc crystals only three out of 100,000 collisions resulted in grain growth [2]. Iron atoms colliding with growing iron particles similarly showed an efficiency of ~0.00002 [3]. For zinc, we can explain inefficient growth due to the difficulty of the colliding atom coming upon a vacancy in the growing crystal lattice before it evaporates from the grain surface. The much higher sticking coefficient of SiO molecules on silica grains is reasonable because the silica grains are highly amorphous or glassy and therefore provide a much higher defect density where SiO molecules can be captured into the grains. In the case of similar Fe experiment, the critical cluster was the dimer. In this case the forming dimer returns to the vapor phase by dissociation due to the excess energy from the formation of the Fe-Fe bond.

Joseph A Nuth↗