Search NASA⌕ Search

Engineering topics

Jun, Zhang

Publications and source records attributed to Jun, Zhang.

31 records · Page 2

High-visibility nonclassical interference between intrinsically pure heralded single photons and photons from a weak coherent field

We present an experiment of nonclassical interference between an intrinsically pure heralded single-photon state and a weak coherent state. Our experiment demonstrates that, without the use of bandpass filters, spectrally pure single photons can have high-visibility (89.4{+-}0.5%) interference with photons from a weak coherent field. Our scheme lays the groundwork for future experiments requiring quantum interference between photons in nonclassical states and those in coherent states.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

VECTOR MAGNETIC FIELDS AND CURRENT HELICITIES IN CORONAL HOLES AND QUIET REGIONS

In the solar photosphere, many properties of coronal holes (CHs) are not known, especially vector magnetic fields. Using observations from Hinode, we investigate vector magnetic fields, current densities, and current helicities in two CHs, and compare them with two normal quiet regions (QRs) for the first time. We find that the areas where large current helicities are located are mainly co-spatial with strong vertical and horizontal field elements both in shape and in location. In the CHs, horizontal magnetic fields, inclination angles, current densities, and current helicities are larger than those in the QRs. The mean vertical current density and current helicity in the CHs and QRs, averaged over all the observed areas including the CHs and QRs, are approximately 0.008 A m{sup -2} and 0.005 G{sup 2} m{sup -1}, respectively. The mean current density in magnetic flux concentrations where the vertical fields are stronger than 100 G is as large as 0.012 {+-} 0.001 A m{sup -2}, consistent with that in the flare productive active regions. Our results imply that the magnetic fields, especially the strong fields, both in the CHs and in the QRs are nonpotential.

79 ASTRONOMY AND ASTROPHYSICS↗

Coupling output of multichannel high power microwaves

The coupling output of multichannel high power microwaves is a promising technique for the development of high power microwave technologies, as it can enhance the output capacities of presently studied devices. According to the investigations on the spatial filtering method and waveguide filtering method, the hybrid filtering method is proposed for the coupling output of multichannel high power microwaves. As an example, a specific structure is designed for the coupling output of S/X/X band three-channel high power microwaves and investigated with the hybrid filtering method. In the experiments, a pulse of 4 GW X band beat waves and a pulse of 1.8 GW S band microwave are obtained.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Amplification of curvature perturbations in cyclic cosmology

We analytically and numerically show that through the cycles with nonsingular bounce, the amplitude of curvature perturbation on a large scale will be amplified and the power spectrum will redden. In some sense, this amplification will eventually destroy the homogeneity of the background, which will lead to the ultimate end of cycles of the global universe. We argue that for the model with increasing cycles, it might be possible that a fissiparous multiverse will emerge after one or several cycles, in which the cycles will continue only at corresponding local regions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Simulation of substrate degradation in composting of sewage sludge

To simulate the substrate degradation kinetics of the composting process, this paper develops a mathematical model with a first-order reaction assumption and heat/mass balance equations. A pilot-scale composting test with a mixture of sewage sludge and wheat straw was conducted in an insulated reactor. The BVS (biodegradable volatile solids) degradation process, matrix mass, MC (moisture content), DM (dry matter) and VS (volatile solid) were simulated numerically by the model and experimental data. The numerical simulation offered a method for simulating k (the first-order rate constant) and estimating k{sub 20} (the first-order rate constant at 20 {sup o}C). After comparison with experimental values, the relative error of the simulation value of the mass of the compost at maturity was 0.22%, MC 2.9%, DM 4.9% and VS 5.2%, which mean that the simulation is a good fit. The k of sewage sludge was simulated, and k{sub 20}, k{sub 20s} (first-order rate coefficient of slow fraction of BVS at 20 {sup o}C) of the sewage sludge were estimated as 0.082 and 0.015 d{sup -1}, respectively.

07 ISOTOPE AND RADIATION SOURCES↗

THREE-DIMENSIONAL SHAPE AND EVOLUTION OF TWO ERUPTIVE FILAMENTS

On 2009 September 26, a dramatic and large filament (LF) eruption and a small filament (SF) eruption were observed in the He II 304 A line by the two EUVI telescopes aboard the STEREO A and B spacecraft. The LF heads out into space and becomes the bright core of a gradual coronal mass ejection (CME), while the eruption of the SF is characterized by motions of the filament materials. Using stereoscopic analysis of EUVI data, we reconstruct the three-dimensional shape and evolution of two eruptive filaments. For the first time, we investigate the true velocities and accelerations of 12 points along the axis of the LF, and find that the velocity and acceleration vary with the measured location. The highest points among the 12 points are the fastest in the first half hour, and then the points at the low-latitude leg of the LF become the fastest. For the SF, it is an asymmetric whip-like filament eruption, and the downward motions of the material lead to the disappearance of the former high-latitude endpoint and the formation of a new low-latitude endpoint. Based on the temporal evolution of the two filaments, we infer that the two filaments lie in the same filament channel. By combining the EUVI, COR1, and COR2 data of STEREO A together, we find that there is no impulsive or fast acceleration in this event. It displays a weak and persistent acceleration for more than 17 hr. The average velocity and acceleration of the LF are 101.8 km s{sup -1} and 2.9 m s{sup -2}, respectively. The filament eruptions are associated with a slow CME with an average velocity of 177.4 km s{sup -1}. The velocity of the CME is nearly 1.6 times as large as that of the filament material. This event is one example of a gradual filament eruption associated with a gradual CME. In addition, the moving direction of the LF changes from a non-radial to a nearly radial direction with a variation of inclination angle of nearly 38.{sup 0}2.

79 ASTRONOMY AND ASTROPHYSICS↗

A Comparative Study of Fibroid Ablation Rates Using Radio Frequency or High-Intensity Focused Ultrasound

This study compared the technical success of fibroid devascularization using high-intensity focused ultrasound (HIFU) and radio frequency (RF) to provide an experimental basis for the clinical selection of a suitable, minimally invasive method for treating uterine fibroids. Patients were randomly divided into two groups and treated with HIFU or RF accordingly. The two groups of patients were divided again into subgroups A, B, and C based on fibroid diameter and subgroups A', B', and C' based on fibroid blood supply grades. The fibroid diameters in subgroups A, B, and C were 2.0 cm {<=} D < 4.0 cm, 4.0 cm {<=} D<6.0 cm and 6.0 cm {<=} D<8.0 cm, respectively, and fibroid blood supplies were classified into three grades corresponding to subgroups A', B', and C', respectively. The complete ablation rates of the two treatments were compared by contrast-enhanced ultrasound. Both treatments were effective, but the general complete ablation rate of RF was higher than that of HIFU (p < 0.05). The comparison between the two treatments in subgroup A and subgroup A' showed that the complete ablation rate of HIFU was as good as that of RF (p > 0.05). In other subgroups, the complete ablation rates of RF were better than those of HIFU (p < 0.05). No severe complications were observed after these two treatments. RF can be applied for the majority of fibroids. As a noninvasive therapy, HIFU could be the preferred method for the treatment of small, hypovascular fibroids.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

A high power Ka band millimeter wave generator with low guiding magnetic field

A slow wave type gigawatt millimeter wave generator is proposed in this paper. In order to increase power capacity, overmoded slow wave structures (SWSs) with larger diameter have been used. Taking advantage of the ''surface wave'' property of overmoded SWSs, the TM{sub 01} mode can be selected to be the operating mode. Calculations have also been carried out to choose a proper low operating magnetic field strength, and it agrees with particle in cell (PIC) simulations. Main structure parameters of the device are optimized by PIC simulations. A typical simulation result is that, at the beam parameters of 600 keV and 5.05 kA, and guiding magnetic field of 0.85 T, a Ka band millimeter wave with an output power of 1.05 GW is generated, yielding a conversion efficiency of about 35%.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Preheating in bubble collisions

In a landscape with metastable minima, the bubbles will inevitably nucleate. We show that when the bubbles collide, due to the dramatic oscillation of the field at the collision region, the energy deposited in the bubble walls can be efficiently released by the explosive production of the particles. In this sense, the collision of bubbles is actually highly inelastic. The cosmological implications of this result are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Synthesis, photophysical and oxygen-sensing properties of a novel Eu{sup 3+} complex incorporated in mesoporous MCM-41

A novel Eu{sup 3+} complex of Eu(DPIQ)(TTA){sub 3} (DPIQ=10H-dipyrido [f,h] indolo [3,2-b] quinoxaline, TTA=2-thenoyltrifluoroacetonate) was synthesized and encapsulated in the mesoporous MCM-41, hoping to explore an oxygen-sensing system based on the long-lived Eu{sup 3+} emitter. The Eu(DPIQ)(TTA){sub 3}/MCM-41 composites were characterized by infrared spectra (IR), ultraviolet-visible (UV-vis) absorption spectra, small-angle X-ray diffraction (SAXRD), luminescence intensity quenching upon various oxygen concentrations, and fluorescence decay analysis. The results indicated that the composites exhibited the characteristic emission of the Eu{sup 3+} ion and the fluorescence intensity of {sup 5}D{sub 0}-{sup 7}F{sub 2} obviously decreased with increasing oxygen concentrations. The oxygen sensing properties of the composites with different loading levels of Eu(DPIQ)(TTA){sub 3} complex were investigated. A sensitivity of 3.04, a short response time of 7 s, and good linearity were obtained for the composites with a loading level of 20 mg/g. These results are the best reported values for optical oxygen-sensing materials based on Eu{sup 3+} complexes so far. - Graphical abstract: Novel optical oxygen-sensing composites are prepared by incorporating a novel Eu{sup 3+} complex Eu(DPIQ)(TTA){sub 3} into MCM-41. The emission intensity of Eu(DPIQ)(TTA){sub 3}/MCM-41 composites exhibits a strong oxygen dependent characteristic and the composite with a loading level of 20 mg/g possesses better fluorescence quenching with increasing oxygen concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Combining microwave beams with high peak power and long pulse duration

The beam combining results with a metal dichroic plate illuminated by the S/X band gigawatt level high power microwaves are presented. According to the previous experiments, the microwave breakdown problem becomes obvious when the peak power and the pulse duration increase, thus, several methods for enhancing the power handling capacity have been considered, and the metal dichroic plates are redesigned to handle the S/X band high power microwaves. Then the design, fabrication, and testing procedure are discussed in detail. The further experimental results reveal that, operated on the self-built accelerator Spark-04, the radiated powers from the S and X band sources have reached 1.8 GW with pulse durations of about 80 ns, and both beams have been successfully operated on the selected dichroic plate without microwave breakdown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dispersive characteristics and longitudinal resonance properties in a relativistic backward wave oscillator with the coaxial arbitrary-profile slow-wave structure

The method for calculating the dispersion relations of the slow-wave structures (SWSs) with arbitrary geometrical structures is studied in detail by using the Fourier series expansion. In addition, dispersive characteristics and longitudinal resonance properties of the SWSs with the cosinusoidal, trapezoidal, and rectangular corrugations are analyzed by numerical calculation. Based on the above discussion, a comparison on an L-band coaxial relativistic backward wave oscillator (BWO) and an L-band coaxial BWO with a coaxial extractor is investigated in detail with particle-in-cell KARAT code (V. P. Tarakanov, Berkeley Research Associates, Inc., 1992). Furthermore, experiments are carried out at the TORCH-01 accelerator under the low guiding magnetic field. At diode voltage of 647 kV, beam current of 9.3 kA, and guiding magnetic field strength of 0.75 T, the microwave is generated with power of 1.07 GW, mode of TM{sub 01}, and frequency of 1.61 GHz. That is the first experimental report of the L-band BWO.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DIPOLAR EVOLUTION IN A CORONAL HOLE REGION

Using observations from the Solar and Heliospheric Observatory, the Solar Terrestrial Relations Observatory, and Hinode, we investigate magnetic field evolution in an equatorial coronal hole region. Two dipoles emerge one by one. The negative element of the first dipole disappears due to the interaction with the positive element of the second dipole. During this process, a jet and a plasma eruption are observed. The opposite polarities of the second dipole separate at first, and then cancel with each other, which is first reported in a coronal hole. With the reduction of unsigned magnetic flux of the second dipole from 9.8 x 10{sup 20} Mx to 3.0 x 10{sup 20} Mx in two days, 171 A brightness decreases by 75% and coronal loops shrink obviously. At the cancellation sites, the transverse fields are strong and point directly from the positive elements to the negative ones, meanwhile Doppler redshifts with an average velocity of 0.9 km s{sup -1} are observed, comparable to the horizontal velocity (1.0 km s{sup -1}) derived from the canceling island motion. Several days later, the northeastern part of the coronal hole, where the dipoles are located, appears as a quiet region. These observations support the idea that the interaction between the two dipoles is caused by flux reconnection, while the cancellation between the opposite polarities of the second dipole is due to the submergence of original loops. These results will help us to understand coronal hole evolution.

79 ASTRONOMY AND ASTROPHYSICS↗