Search NASA⌕ Search

Engineering topics

Jung, K. J.

Publications and source records attributed to Jung, K. J..

Key technologies for tritium storage bed development

ITER Storage and Delivery System (SDS) is a complex system involving tens of storage beds. The most important SDS getter bed will be used for the absorption and desorption of hydrogen isotopes in accordance with the fusion fuel cycle scenario. In this paper the current status concerning research/development activities for the optimal approach to the final SDS design is introduced. A thermal analysis is performed and discussed on the aspect of heat losses considering whether the reflector and/or the feed-through is present or not. A thermal hydraulic simulation shows that the presence of 3 or 4 reflectors minimize the heat loss. Another important point is to introduce the real-time gas analysis in the He{sup 3} collection system. In this study 2 independent strength methods based on gas chromatography and quadruple mass spectrometer for one and on a modified self-assaying quadruple mass spectrometer for the second are applied to separate the hydrogen isotopes in helium gas. Another issue is the possibility of using depleted uranium getter material for the storage of hydrogen isotopes, especially of tritium.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Development of tritium technologies at KAERI

Korea has been operating a CANDU nuclear power plant since 1983. Tritium generated in the heavy water of the plant is removed by the Wolsong TRF (Tritium Removal Facility) and measurement campaigns of tritium near the power plant have shown the efficiency of the TRF system. The HANARO reactor uses heavy water as both reflector and moderator. In HANARO the tritiated water removal system consists of compressors, condensers, and adsorption beds. A tritium behavior analysis code (TRIBAC) for a Very High Temperature Gas-Cooled Reactor (VHTR) is under development at KAERI. The TRIBAC computer software has been equipped with models for tritium production, purification, and leakage, as well as chemisorption and tritium behavior, in the hydrogen production system. Korea takes part into the ITER program and is responsible for the supply of an SDS (Tritium Storage and Delivery System). Within this program Korea has launched an experimental program to study the physico-chemical properties of metal and their hydrides in which hydrogen isotope gases can be stored and removed safely.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Hydriding performances and modeling of a small-scale ZrCo bed

In order to evaluate the performance of the hydriding of a ZrCo bed, a small-scale getter bed of ZrCo was designed and fabricated. The results show that the hydriding time at room temperature was somewhat shorter than that at higher temperatures of ZrCo and that the performance of hydriding at low temperatures of ZrCo was better than that at high temperatures of ZrCo. The experimental results of the hydrogen pressure of hydriding (ZrCoH{sub 2.8}) at different temperatures were in agreement with the computed values using a numerical modeling equation but with a small difference during the first 10 minutes of the hydriding of ZrCo. The model is based on the Kozeny-Carman equation. The effect of a helium blanket on hydriding was measured and analyzed. The hydriding with no helium blanket in the primary vessel of ZrCo is much faster than that with a helium blanket. The hydriding at a helium concentration of 8% is slower than that at 0%. As the helium concentration increases, the hydriding of ZrCo decreases. The experimental results of the hydriding with 0 %, 4%, and 8% of helium concentration are in agreement with the calculated values but with minimal differences during the first 10 minutes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗