Engineering topics

Juno, J.

Publications and source records attributed to Juno, J..

9 records

DOE OSTI2023

Effect of neutral interactions on parallel transport and blob dynamics in gyrokinetic scrape-off layer simulations

The effect of neutral interactions on scrape-off layer (SOL) turbulence is investigated in a continuum gyrokinetic code that has been coupled to a continuum kinetic model of neutral transport. This extends the work of a previous paper, which compared two NSTX SOL simulations in simple helical geometry, one with neutrals and one without. The former included electron-impact ionization, charge exchange, and wall recycling. Here, the case with neutrals is compared to a gyrokinetic-only simulation that includes an effective ionization source to separate the effect of sourcing from charge exchange collisions. It is observed that sourcing accounts for many features of the simulated SOL with neutrals, including density and temperature magnitudes and reduced normalized density fluctuations, but differences persist. In particular, a flatter density profile results due to changes in parallel transport when neutral collisions are included, illustrating the importance of neutral drag on global plasma properties. An analysis of coherent turbulent structures, or blobs, in these simulations demonstrates the case with neutrals has slower and larger blobs. Here, a series of seeded blob simulations corroborates the blob velocity observation. In general, the blob motion does not contribute significantly to radial transport in these simulations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Isolation and phase-space energization analysis of the instabilities in collisionless shocks

We analyse the generation of kinetic instabilities and their effect on the energization of ions in non-relativistic, oblique collisionless shocks using a 3D-3V (three spatial with three velocity components) simulation by dHybridR, a hybrid particle-in-cell code. At sufficiently high Mach number, quasi-perpendicular and oblique shocks can experience rippling of the shock surface caused by kinetic instabilities arising from free energy in the ion velocity distribution due to the combination of the incoming ion beam and the population of ions reflected at the shock front. To understand the role of the ripple on particle energization, we devise a new instability isolation method to identify the unstable modes underlying the ripple and interpret the results in terms of the governing kinetic instability. We generate velocity-space signatures using the field–particle correlation technique to look at energy transfer in phase space from the isolated instability driving the shock ripple, providing a viewpoint on the different dynamics of distinct populations of ions in phase space. Together, the field–particle correlation technique and our new instability isolation method provide a unique viewpoint on the different dynamics of distinct populations of ions in phase space and allow us to completely characterize the energetics of the collisionless shock under investigation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2023

Continuum kinetic investigation of the impact of bias potentials in the current saturation regime on sheath formation

In this work, we examine sheath formation in the presence of bias potentials in the current saturation regime for pulsed power fusion experiments. It is important to understand how the particle and heat fluxes at the wall may impact the wall material and affect electrode degradation. Here, simulations are performed using the 1X-1V Boltzmann–Poisson system for a proton–electron plasma in the presence of bias potentials ranging from 0 to 10 kV. The results indicate that the sheath near the anode remains generally the same as that of a classical sheath without the presence of a bias potential. However, the sheath near the cathode becomes more prominent with a larger potential drop, a significant decrease in the electron density, and larger sheath lengths. The spatially constant current density increases to a saturation value with the increasing bias potential. For high bias potentials, the material choice needs to consider that the anode faces significantly larger particle and heat fluxes compared to the cathode. In general, the results trend with theory with differences attributed to the simplified assumptions in the theory and the kinetic effects considered in the simulations. Due to the significant computational cost of a well resolved 1X-2V simulation, only one such simulation is performed for the 5 kV case showing higher current.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2022

Kinetic modeling of neutral transport for a continuum gyrokinetic code

In this work we present the first-of-its-kind coupling of a continuum full- f gyrokinetic turbulence model with a 6D continuum model for kinetic neutrals, carried out using the Gkeyll code. Our objective is to improve the first-principle understanding of the role of neutrals in plasma fueling, detachment, and their interaction with edge plasma profiles and turbulence statistics. Our model includes only atomic hydrogen and incorporates electron-impact ionization, charge exchange, and wall recycling. These features have been successfully verified with analytical predictions and benchmarked with the DEGAS2 Monte Carlo neutral code. We carry out simulations for a scrape-off layer (SOL) with simplified geometry and National Spherical Torus Experiment parameters. We compare these results to a baseline simulation without neutrals and find that neutral interactions reduce the normalized density fluctuation levels and associated skewness and kurtosis, while increasing auto-correlation times. A flatter density profile is also observed, similar to the SOL density shoulder formation in experimental scenarios with high fueling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2019

An Extended MHD Study of the 16 October 2015 MMS Diffusion Region Crossing

The Magnetospheric Multiscale (MMS) mission has given us unprecedented access to high cadence particle and field data of magnetic reconnection at Earth's magnetopause. MMS first passed very near an X-line on 16 October 2015, the Burch event, and has since observed multiple X-line crossings. Subsequent 3-D particle-in-cell (PIC) modeling efforts of and comparison with the Burch event have revealed a host of novel physical insights concerning magnetic reconnection, turbulence-induced particle mixing, and secondary instabilities. In this study, we employ the Gkeyll simulation framework to study the Burch event with different classes of extended, multifluid magnetohydrodynamics (MHD), including models that incorporate important kinetic effects, such as the electron pressure tensor, with physics-based closure relations designed to capture linear Landau damping. Such fluid modeling approaches are able to capture different levels of kinetic physics in global simulations and are generally less costly than fully kinetic PIC. Herein we focus on the additional physics one can capture with increasing levels of fluid closure refinement via comparison with MMS data and existing PIC simulations. In particular, we find that the ten-moment model well captures the agyrotropic structure of the pressure tensor in the vicinity of the X-line and the magnitude of anisotropic electron heating observed in MMS and PIC simulations. However, the ten-moment model is found to have difficulty resolving the lower hybrid drift instability, which plays a fundamental role in heating and mixing electrons in the current layer.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Drift Instabilities in Thin Current Sheets Using a Two–Fluid Model With Pressure Tensor Effects

The integration of kinetic effects in fluid models is important for global simulations of the Earth's magnetosphere. We use a two–fluid 10–moment model, which includes the pressure tensor and has been used to study reconnection, to study the drift kink and lower hybrid drift instabilities. Using a nonlocal linear eigenmode analysis, we find that for the kink mode, the 10–moment model shows good agreement with kinetic calculations with the same closure model used in reconnection simulations, while the electromagnetic and electrostatic lower hybrid instabilities require modeling the effects of the ion resonance using a Landau fluid closure. As a result, comparisons with kinetic simulations and the implications of the results for global magnetospheric simulations are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

DOE OSTI2019

Temperature-dependent Saturation of Weibel-type Instabilities in Counter-streaming Plasmas

We present the first 2X2V continuum Vlasov–Maxwell simulations of interpenetrating, unmagnetized plasmas to study the competition between two-stream, Oblique, and filamentation modes in the weakly relativistic regime. We find that after nonlinear saturation of the fastest-growing two-stream and Oblique modes, the effective temperature anisotropy, which drives current filament formation via the secular Weibel instability, has a strong dependence on the internal temperature of the counter-streaming plasmas. The effective temperature anisotropy is significantly more reduced in colder than in hotter plasmas, leading to orders of magnitude lower magnetization for colder plasmas. Here, a strong dependence of the energy conversion efficiency of Weibel-type instabilities on internal beam temperature has implications for determining their contribution to the observed magnetization of many astrophysical and laboratory plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2017

Discontinuous Galerkin algorithms for fully kinetic plasmas

Here, we present a new algorithm for the discretization of the non-relativistic Vlasov–Maxwell system of equations for the study of plasmas in the kinetic regime. Using the discontinuous Galerkin finite element method for the spatial discretization, we obtain a high order accurate solution for the plasma's distribution function. Time stepping for the distribution function is done explicitly with a third order strong-stability preserving Runge–Kutta method. Since the Vlasov equation in the Vlasov–Maxwell system is a high dimensional transport equation, up to six dimensions plus time, we take special care to note various features we have implemented to reduce the cost while maintaining the integrity of the solution, including the use of a reduced high-order basis set. A series of benchmarks, from simple wave and shock calculations, to a five dimensional turbulence simulation, are presented to verify the efficacy of our set of numerical methods, as well as demonstrate the power of the implemented features.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

DOE OSTI2017

Continuum kinetic and multi-fluid simulations of classical sheaths

The kinetic study of plasma sheaths is critical, among other things, to understand the deposition of heat on walls, the effect of sputtering, and contamination of the plasma with detrimental impurities. The plasma sheath also provides a boundary condition and can often have a significant global impact on the bulk plasma. In this paper, kinetic studies of classical sheaths are performed with the continuum kinetic code, Gkeyll, which directly solves the Vlasov-Maxwell equations. The code uses a novel version of the finite-element discontinuous Galerkin scheme that conserves energy in the continuous-time limit. The fields are computed using Maxwell equations. Ionization and scattering collisions are included; however, surface effects are neglected. The aim of this work is to introduce the continuum kinetic method and compare its results with those obtained from an already established finite-volume multi-fluid model also implemented in Gkeyll. Novel boundary conditions on the fluids allow the sheath to form without specifying wall fluxes, so the fluids and fields adjust self-consistently at the wall. Our work demonstrates that the kinetic and fluid results are in agreement for the momentum flux, showing that in certain regimes, a multifluid model can be a useful approximation for simulating the plasma boundary. There are differences in the electrostatic potential between the fluid and kinetic results. Further, the direct solutions of the distribution function presented here highlight the non-Maxwellian distribution of electrons in the sheath, emphasizing the need for a kinetic model. The densities, velocities, and the potential show a good agreement between the kinetic and fluid results. But, kinetic physics is highlighted through higher moments such as parallel and perpendicular temperatures which provide significant differences from the fluid results in which the temperature is assumed to be isotropic. Besides decompression cooling, the heat flux is shown to play a role in the temperature differences that are observed, especially inside the collisionless sheath. Published by AIP Publishing.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗